fix timeout accounting in the scheduler

oops

.editorconfig

@@ -0,0 +1,5 @@
+root = true
+
+[*.lua]
+indent_style = space
+indent_size = 1

.gitignore

@@ -1,5 +1,5 @@
-apidoc.md
-apidoc.html
 *.cpio
 *.af
+apidoc.md
 /target
+/doc

INSTALL.md

@@ -0,0 +1,82 @@
+# Installing PsychOS
+
+## From OpenOS
+### Requirements
+In general:
+- oppm
+- mtar
+
+For installing to an unmanaged drive or tape
+- slicer
+- partman
+- rtfs
+- boopu
+
+There are two easy methods to get these packages.
+1. With oppm, if available, you can run `oppm install mtar partman rtfs boopu`.
+2. You can use the `obootstrap.lua` script to set up a temporary environment for installing PsychOS. This can even be used from the OpenOS installer disk.  
+```
+# wget https://git.shadowkat.net/izaya/OC-PsychOS2/raw/branch/master/obootstrap.lua /tmp/obootstrap.lua
+# /tmp/obootstrap.lua
+```
+
+### Preparing the target disk
+#### Managed filesystem
+Preparing a managed filesystem is extremely simple: attach it to your computer, and make sure there's nothing that you want to keep in the following locations on the filesystem:
+- init.lua
+- lib/
+- service/
+- doc/
+- pkg/
+- cfg/
+
+#### Unmanaged drive or tape
+##### Creating partitions
+First, you'll need to find out how many sectors your target device has. `slicer <addr> show` will show you something like this:
+
+```
+# slicer 9f7 show
+Drive 9f755736 - 1024KiB, 2048 sectors:
+ #  Name                 Type Start   Len   End
+```
+
+The usable space on the disk is going to be two sectors less than the total size - sectors 2 through 2047, in this case, as you will want to leave space for the OSDI partition table at the start, and the MTPT partition table at the end.
+
+First, we'll create the boot partition. 64KiB is the recommended size, though 48KiB may be enough. OC disks use 512 byte sectors, so that will work out to 128 sectors.
+
+```
+# slicer 9f7 add init.lua boot 2 128
+Drive 9f755736 - 1024KiB, 2048 sectors:
+ #  Name                 Type Start   Len   End
+ 1: 9f755736             mtpt     0     0    -1
+ 2: init.lua             boot     2   128   129
+```
+
+Next, we need to create an rtfs partition, for the boot filesystem. This can use the rest of the space on the disk, but should be named `<first 8 characters of computer address>-boot`.
+
+```
+# slicer 9f7 add ffa5c282-boot rtfs 130 1918
+Drive 9f755736 - 1024KiB, 2048 sectors:
+ #  Name                 Type Start   Len   End
+ 1: 9f755736             mtpt     0     0    -1
+ 2: init.lua             boot     2   128   129
+ 3: ffa5c282-boot        rtfs   130  1918  2047
+```
+
+Once you're all done, you can restart partman and it should recognise the new partitions.
+
+```
+# rc partman restart
+# components part
+partition       9f755736-a739-4f45-8c5c-35a66a7f5dbe/2
+```
+
+##### Formatting the filesystem
+Next, we'll use the mkfs.rtfs utility to format the filesystem partition we just created. Do note that the order of components is not fixed, so using a shortened version can result in unreliable behavior, like, for example, formatting the boot partition.
+
+```
+# mkfs.rtfs 9f755736-a739-4f45-8c5c-35a66a7f5dbe/2 ffa5c282-boot
+9f755736-a739-4f45-8c5c-35a66a7f5dbe/2
+```
+
+To make OpenOS mount the filesystem, the simplest way is to restart partman again, as described in the previous section.

README.md

@@ -6,23 +6,31 @@ A lightweight, multi-user operating system for OpenComputers
 
 ### The kernel
 
-The kernel can be built using luapreproc:
+The kernel is composed of a number of modules, found in the *module/* directory, as specified by a file in the *kcfg* directory, `base` by default. Which modules are included can be customised by changing the include statements in the kernel configuration file; copying it and customizing that is recommended, so you can *git pull* later without having to stash or reset your changes.
 
-    ./luapreproc.lua module/init.lua kernel.lua
+#### Unix-like systems
+
+The kernel can be built using the preproc library and provided scripts:
+
+    lua build.lua kcfg/base.cfg kernel.lua
+
+#### PsychOS
+
+The kernel can be built from inside PsychOS using the preproc library, assuming you have the kernel source available:
+
+    preproc("kcfg/base.cfg","kernel.lua")
 
 ### The boot filesystem
 
 A boot filesystem contains several things:
 
  - The kernel, as init.lua
- - The exec/ directory, as this contains all executables
  - The lib/ directory, containing libraries
  - The service/ directory, containing system services
+ - The exec/ directory, containing single-shot executable files
 
 This has been automated in the form of build.sh, pending a real makefile.
 
 ## Documentation
 
-To generate function documentation, run:
+Documentation is generated as the system is built with build.sh; a set of markdown files will be placed into *doc/*, as well as an all-in-one *apidoc.md*. If pandoc is installed, an *apidoc.pdf* will also be generated.
-
-    ./finddesc.lua module/* lib/* > apidoc.md

build.lua

@@ -0,0 +1,4 @@
+local preproc = require "preproc"
+
+preproc.minify = true
+preproc(...)

build.sh

@@ -1,10 +1,15 @@
-#!/bin/sh
+#!/bin/bash
+LUA=${LUA:-lua}
+KVAR=${1:-base}
 rm -r target/*
-mkdir target &>/dev/null
+mkdir -p target/doc &>/dev/null
-lua luapreproc.lua module/init.lua target/init.lua
+$LUA build.lua kcfg/$KVAR.cfg target/init.lua
-echo _OSVERSION=\"PsychOS 2.0a2-$(git rev-parse --short HEAD)\" > target/version.lua
+echo _OSVERSION=\"PsychOS 2.0a3-$(git rev-parse --short HEAD)-$KVAR\" > target/version.lua
 cat target/version.lua target/init.lua > target/tinit.lua
 mv target/tinit.lua target/init.lua
-cp -r service/ lib/ cfg/ target/
+cp -r service/ lib/ cfg/ exec/ target/
-lua finddesc.lua $(find module/ -type f) $(find lib/ -type f) > apidoc.md
 rm target/version.lua
+rm -r doc/ &>/dev/null
+$LUA finddesc.lua doc/ $(find lib/ module/ -type f|sort)
+$LUA gendoc.lua target/doc/kernel.dict $(find module/ -type f|sort)
+pandoc doc/apidoc.md docs-metadata.yml --template=template.tex -o doc/apidoc.pdf

cfg/rc.cfg

@@ -1 +0,0 @@
-{enabled={"getty","minitel"}}

docs-metadata.yml

@@ -0,0 +1,3 @@
+---
+title: 'PsychOS API Documentation'
+---

finddesc.lua

@@ -1,27 +1,60 @@
+#!/usr/bin/env lua
+local doc = require "lib/doc"
 local tA = {...}
-local docfiles = {}
+
-for _,file in pairs(tA) do
+local outpath = table.remove(tA,1)
- docfiles[file] = {}
+
- local f = io.open(file)
+print(outpath)
- local lines = {}
+
- for l in f:read("*a"):gmatch("[^\n]+") do
+local function formatDocs(fd)
-  if l:find("function") and not l:find("local") then
+ local rs = ""
-   lines[#lines+1] = l
+ for name,finfo in pairs(fd) do
+  if rs:len() > 0 then
+   rs = rs .. "\n\n"
   end
+  local as = ""
+  for k,v in pairs(finfo.args) do
+   if k > 1 then
+    as = as .. ", "
+   end
+   as = as .. v[1]
+   if v[2] then
+    as = as .. "^"..v[2].."^"
+   end
+  end
+  local rt = ""
+  for k,v in pairs(finfo.outtypes or {}) do
+   if rt:len() > 0 then
+    rt = rt .. ", "
+   else
+    rt = ": "
+   end
+   rt = rt .. v
+  end
+  rs = string.format("%s## %s(%s)%s\n%s",rs,name,as,rt,finfo.description)
  end
- for k,v in pairs(lines) do
+ return rs
-  local name, args, desc = v:match("function%s+(.+)%s*%((.*)%)%s*%-%-%s*(.+)")
+end
-  if name and args and desc then
+
-   docfiles[file][#docfiles[file]+1] = string.format("##%s(%s)\n%s",name,args,desc)
+os.execute("sh -c 'mkdir -p "..outpath .. "'")
-  end
+if outpath:sub(#outpath) == "/" then outpath = outpath:sub(1, #outpath - 1) end
+local ad = io.open(outpath.."/apidoc.md","w")
+
+for k,v in pairs(tA) do
+ local fd = doc.parsefile(v)
+ local ds = formatDocs(fd)
+ print(string.format("%s: %i",v,ds:len()))
+ if ds and ds:len() > 0 then
+  os.execute("sh -c 'mkdir -p $(dirname \""..outpath.."/"..v.."\")'")
+  local f = io.open(outpath.."/"..v:gsub("%.lua$",".md"),"wb")
+  f:write(string.format("# %s\n\n",v))
+  f:write(ds)
+  f:write("\n\n")
+  f:close()
+  ad:write(string.format("# %s\n\n",v))
+  ad:write(ds)
+  ad:write("\n\n")
  end
 end
 
-for k,v in pairs(docfiles) do
+ad:close()
- if #v > 0 then
-  print("#"..k)
-  for l,m in pairs(v) do
-   print(m)
-  end
- end
-end

gendoc.lua

@@ -0,0 +1,51 @@
+#!/usr/bin/env lua
+local doc = require "lib/doc"
+local ser = require "lib/serialization"
+local tA = {...}
+
+local outpath = table.remove(tA,1)
+
+print(outpath)
+
+local function formatDocs(fd)
+ local rs = ""
+ for name,finfo in pairs(fd) do
+  if rs:len() > 0 then
+   rs = rs .. "\n\n"
+  end
+  local as = ""
+  for k,v in pairs(finfo.args) do
+   if k > 1 then
+    as = as .. ", "
+   end
+   as = as .. v[1]
+   if v[2] then
+    as = as .. "^"..v[2].."^"
+   end
+  end
+  local rt = ""
+  for k,v in pairs(finfo.outtypes or {}) do
+   if rt:len() > 0 then
+    rt = rt .. ", "
+   else
+    rt = ": "
+   end
+   rt = rt .. v
+  end
+  rs = string.format("%s## %s(%s)%s\n%s",rs,name,as,rt,finfo.description)
+ end
+ return rs
+end
+
+local ad = io.open(outpath,"wb")
+
+for k,v in pairs(tA) do
+ local fd = doc.parsefile(v)
+ local ds = ser.serialize(fd)
+ local tn = v:match("/(.+)$")
+ if ds:len() > 3 then
+  ad:write(tn.."\t"..ds:gsub("\n",""):gsub(",  +",",").."\n")
+ end
+end
+
+ad:close()

kcfg/base.cfg

@@ -0,0 +1,2 @@
+--#include "module/base.lua"
+--#include "module/init.lua"

kcfg/full.cfg

@@ -0,0 +1,3 @@
+--#include "module/base.lua"
+--#include "module/rtfsboot.lua"
+--#include "module/init.lua"

lib/doc.lua

@@ -0,0 +1,154 @@
+local _,serial = pcall(require,"serialization")
+local doc = {}
+doc.searchers = {}
+doc.tctab = {
+ ["string"] = 31,
+ ["table"] = 32,
+ ["userdata"] = 32,
+ ["number"] = 33,
+ ["boolean"] = 35,
+ ["function"] = 36
+}
+
+function doc.parsefile(path) -- string -- table -- parses file from *path* to return a documentation table
+ local fdoc = {}
+ local f = io.open(path)
+ local lines = {}
+ for l in f:read("*a"):gmatch("[^\n]+") do
+  if l:find("function") and not l:find("local") then
+   lines[#lines+1] = l
+  end
+ end
+ for k,v in pairs(lines) do
+  local name, args, desc = v:match("function%s+(.+)%s*%((.*)%)%s*%-%-%s*(.+)")
+  if name and args and desc then
+   local fd = {["description"]=desc or desc,["args"]={},["atypes"]={}}
+   for word in args:gmatch("[^%s,]+") do
+    fd.args[#fd.args+1] = {word}
+    fd.atypes[word] = "unknown"
+   end
+   local argtypes, outtypes, description = desc:match("(.-)%-%-(.-)%-%-%s*(.+)")
+   if argtypes and outtypes and description then
+    local wc = 1
+    for word in argtypes:gmatch("%S+") do
+     fd.args[wc][2] = word
+     fd.atypes[fd.args[wc][1]] = word
+     wc = wc + 1
+    end
+    local wc = 1
+    for word in outtypes:gmatch("%S+") do
+     fd.outtypes = fd.outtypes or {}
+     fd.outtypes[#fd.outtypes+1] = word
+    end
+    fd.description = description
+   end
+   fdoc[name] = fd
+  end
+ end
+ return fdoc
+end
+
+function doc.format(fdoc) -- table -- string -- returns VT100 formatted documentation from documentation table *fdoc*
+ local rs = "" -- string to return
+ for fname,finfo in pairs(fdoc) do
+  if rs:len() > 0 then rs = rs .. "\n\n" end
+  local as = "" -- string containing arguments for a given function, with colours for type
+  for k,v in ipairs(finfo.args) do
+   local c = doc.tctab[v[2]] or 0
+   if k > 1 then
+    as = as .. ", "
+   end
+   if v[2] then
+    as = string.format("%s%s: \27[%im%s\27[0m",as,v[2],c,v[1])
+   else
+    as = string.format("%s\27[%im%s\27[0m",as,c,v[1])
+   end
+  end
+  local rv = ""
+  if finfo.outtypes then
+   rv = ": "
+   for k,v in ipairs(finfo.outtypes) do
+    if k > 1 then
+     rv = rv .. ", "
+    end
+    local c = doc.tctab[v] or 0
+    rv = string.format("%s\27[%im%s\27[0m",rv,c,v)
+   end
+  end
+  local nd = finfo.description
+  for k,v in pairs(finfo.atypes) do
+   local c = doc.tctab[v] or 7
+   nd=nd:gsub("%*"..k.."%*","\27["..tostring(c).."m"..k.."\27[0m")
+  end
+  rs = string.format("%s\27[36m%s\27[0m(%s)%s\n%s",rs,fname,as,rv,nd)
+ end
+ return rs
+end
+
+function doc.searchers.lib(name) -- string -- string string -- Tries to find a documentation from a library with *name*. Returns either a string of documentation, or false and a reason.
+ local lib = os.getenv("LIB") or "/boot/lib"
+ local dt
+ for d in lib:gmatch("[^\n]+") do
+  if fs.exists(d.."/"..name) then
+   dt = doc.parsefile(d.."/"..name)
+  elseif fs.exists(d.."/"..name..".lua") then
+   dt = doc.parsefile(d.."/"..name..".lua")
+  end
+ end
+ if not dt then return false, "unable to find documentation for "..tostring(name) end
+ return doc.format(dt)
+end
+function doc.searchers.cdoc(topic) -- string -- string string -- Searches for documentation labelled as *topic* in .dict files under /boot/doc/
+ if not serial then return end
+ for k,v in ipairs(fs.list("/boot/doc")) do
+  if v:sub(-5) == ".dict" then
+   local f=io.open("/boot/doc/"..v,"rb")
+   for line in f:lines() do
+    local mname, docs = line:match("^(.-)\t(.+)$")
+    if mname == topic or mname == topic..".lua" then
+     return doc.format(serial.unserialize(docs))
+    end
+   end
+  end
+ end
+end
+function doc.searchers.component(name)
+ local dt = {}
+ local addr = component.list(name)()
+ if addr then
+  for fname,_ in pairs(component.methods(addr)) do
+   fd = {args={},outtypes={},atypes={}}
+   local ds = component.doc(addr,fname)
+   local ins, outs, desc = ds:match("%((.-)%)") or "", ds:match("%):(.*)%-%-") or "", ds:match("%-%-(.+)") or ""
+   for arg in ins:gmatch("[^,%s%[%]]+") do
+    local an,at = arg:match("(.-):(.+)")
+    at = at:match("(.-)=") or at
+    fd.args[#fd.args+1] = {an,at}
+    fd.atypes[an] = at
+   end
+   for out in outs:gmatch("[^,]+") do
+    fd.outtypes[#fd.outtypes+1] = out:match("^%s*(.-)%s*$")
+   end
+   fd.description = desc or ""
+   dt[name.."."..fname] = fd
+  end
+ else
+  return
+ end
+ return doc.format(dt)
+end
+
+function doc.docs(topic) -- string -- boolean -- Displays the documentation for *topic*, returning true, or errors. Also callable as just doc().
+ local lib = os.getenv("LIB") or "/boot/lib"
+ local dt
+ for k,v in pairs(doc.searchers) do
+  dt=v(topic)
+  if dt then
+   print(dt)
+   return true
+  end
+ end
+ error("unable to find documentation for "..tostring(name))
+end
+
+return setmetatable(doc,{__call=function(_,topic) return doc.docs(topic) end})

lib/download.lua

@@ -0,0 +1,133 @@
+local net = require "minitel"
+local dl = {}
+dl.protos = {}
+
+-- Stolen from the old exec/fget
+local function parseURL(url)
+ local proto,addr = url:match("(.-)://(.+)")
+ addr = addr or url
+ local hp, path = addr:match("(.-)(/.*)")
+ hp, path = hp or addr, path or "/"
+ local host, port = hp:match("(.+):(.+)")
+ host = host or hp
+ return proto, host, port, path
+end
+
+function dl.protos.fget(host, optPort, path, dest) -- string string string number -- boolean -- Downloads path from host (on optPort or 70), printing the directory listing, or saving the file to dest.
+ local socket = assert(net.open(host, optPort or 70))
+ socket:write(string.format("t%s\n", path))
+ local status
+ repeat
+  coroutine.yield()
+  status = socket:read(1)
+ until status ~= ""
+
+ if status == "d" then
+  io.write("Directory Listing:\n")
+  local tmp = ""
+  repeat
+   coroutine.yield()
+   tmp = socket:read("*a")
+   
+   io.write(tmp)
+  until socket.state == "closed" and tmp == ""
+
+  return true
+ elseif status == "y" then
+  if not dest then
+   error("Must provide local path to save remote files.")
+  end
+  
+  io.write(string.format("Saving %s to %s...\n", path, dest))
+  local f = assert(io.open(dest, "wb"))
+  local tmp = ""
+  repeat
+   coroutine.yield()
+   tmp = socket:read("*a")
+   
+   f:write(tmp)
+  until socket.state == "closed" and tmp == ""
+
+  f:close()
+  print("Done.")
+  
+  return true
+ else
+  local err, tmp = "", ""
+  repeat
+   coroutine.yield()
+   tmp = socket:read("*a")
+
+   err = err .. tmp
+  until socket.state == "closed" and tmp == ""
+  
+  error(string.format("Got error from remote host: %s", err))
+ end
+end
+
+function dl.protos.http(host, optPort, path, dest, url) -- string string string number -- boolean -- Downloads *url* to *dest* via the internet card, if available.
+ if not component.list("internet")() then
+  local proto,host,sPort,path = parseURL(url)
+  local proxy = os.getenv(proto:upper().."_PROXY")
+  if not proxy and fs.exists("/boot/cfg/"..proto.."_proxy") then
+   local f = io.open("/boot/cfg/"..proto.."_proxy","rb")
+   proxy = f:read()
+   f:close()
+  end
+  if not proxy then error("No internet card or HTTP(S) proxy available") end
+  print("Internet card unavailable, falling back to proxy "..proxy)
+  if optPort then host=string.format("%s:%i",host,optPort) end
+  return dl.wget(string.format("%s/%s%s",proxy,host,path),dest)
+ end
+ if not dest then
+  error("Must provide local path to save remote files.")
+ end
+ local R,r=component.invoke(component.list("internet")(),"request",url)
+ if not R then error(r) end
+ repeat
+  ok, err = R.finishConnect()
+  if type(ok) ~= "boolean" then
+   if err == url then
+    return 404, "This is a bug in OC, I think?"
+   end
+   return -1, err or "Connection Error"
+  end
+  coroutine.yield()
+ until ok
+ local code, messsage, headers
+ repeat
+  coroutine.yield()
+  code, message, headers = R.response()
+ until code or message
+ if code > 299 or code < 200 then
+  return false, code, message
+ end
+ local f=io.open(dest,"wb")
+ if not f then error("Unable to open file "..dest) end
+ io.write(string.format("Saving %s to %s...\n", url, dest))
+ repeat
+  coroutine.yield()
+  ns = R.read()
+  f:write(ns or "")
+ until not ns
+ f:close()
+ print("Done.")
+ return true
+end
+dl.protos.https = dl.protos.http
+
+function dl.wget(remotePath, dest) -- string string -- -- Downloads from remote *remotePath* to *dest*
+ local proto, host, sPort, path = parseURL(remotePath)
+ if dl.protos[proto] then
+  local port
+  if sPort then
+   port = tonumber(sPort)
+  end
+  
+  dl.protos[proto](host, port, path, dest, remotePath)
+ else
+  error("Unsupported protocol: " .. tostring(proto))
+ end
+end
+
+return setmetatable(dl,{__call=function(_,path,dest) return dl.wget(path,dest) end})

lib/ed.lua

@@ -17,7 +17,7 @@ end
 function ed.bfunc:save(fpath)
  local path = fpath or self.path
  if not path then return false, "no path" end
-	self.path = path
+  self.path = path
  local f = io.open(path,"wb")
  if not f then return false, "unable to open file" end
  for k,v in ipairs(self) do
@@ -112,6 +112,7 @@ function ed.newBuffer()
 end 
 
 function ed.open(buffer)
+ local bpath = buffer
  if ed.buffers[buffer] then
   buffer = ed.buffers[buffer]
  end
@@ -120,7 +121,9 @@ function ed.open(buffer)
   nb:load(buffer)
   buffer = nb
  end
- if type(buffer) ~= "table" then buffer = ed.newBuffer() buffer[1] = "" end
+ if type(buffer) ~= "table" then buffer = ed.newBuffer() end
+ buffer[1] = buffer[1] or "" 
+ buffer.path = buffer.path or "/"..((bpath:sub(1,1) == "/" and table.concat(fs.segments(path),"/")) or table.concat(fs.segments(os.getenv("PWD").."/"..bpath),"/"))
  return buffer
 end
 
@@ -160,10 +163,10 @@ function ed.visual(buffer)
   if cx ~= ox or cy ~= oy or force then
    io.write("\27[2J\27[H")
    for i = cy, cy+my do
-    print(string.format("\27[31m%4i \27[0m%s",i,(buffer[i] or "\27[36m~"):sub(cx,cx+mx-6)))
+    io.write(string.format("\27[1;%iH\27[31m%4i \27[0m%s",(i-cy+1),i,(buffer[i] or "\27[36m~"):sub(cx,cx+mx-6)))
    end
   elseif mode == "i" then
-   print(string.format("\27[2K\27[999D\27[31m%4i \27[0m%s",buffer.y,(buffer[buffer.y] or "\27[36m~"):sub(cx,cx+mx-6)))
+   io.write(string.format("\27[2K\27[999D\27[31m%4i \27[0m%s",buffer.y,(buffer[buffer.y] or "\27[36m~"):sub(cx,cx+mx-6)))
   end
   io.write(string.format("\27[1;%iH\27[0;36;%im\27[2K[%s] ced visual: %i,%i/%i, %iK free %i",my+2,(mode == "c" and 7) or 0, mode, buffer.x, buffer.y, #buffer, computer.freeMemory()//1024,mult))
   io.write(string.format("\27[%i;%iH\27[0m",buffer.x+6-cx,buffer.y-cy+1))

lib/event.lua

@@ -1,5 +1,5 @@
 local event = {}
-function event.pull(t,...) -- return an event, optionally with timeout *t* and filter *...*.
+function event.pull(t,...) -- number -- -- return an event, optionally with timeout *t* and filter *...*.
  local tA = {...}
  if type(t) == "string" then
   table.insert(tA,1,t)
@@ -26,7 +26,7 @@ function event.pull(t,...) -- return an event, optionally with timeout *t* and f
  return nil
 end
 
-function event.listen(e,f) -- run function *f* for every occurance of event *e*
+function event.listen(e,f) -- string function -- -- run function *f* for every occurance of event *e*
  os.spawn(function() while true do
   local tEv = {coroutine.yield()}
   if tEv[1] == e then
@@ -36,7 +36,7 @@ function event.listen(e,f) -- run function *f* for every occurance of event *e*
  end end,string.format("[%d] %s listener",os.pid(),e))
 end
 
-function event.ignore(e,f) -- stop function *f* running for every occurance of event *e*
+function event.ignore(e,f) -- string function -- -- stop function *f* running for every occurance of event *e*
  computer.pushSignal("unlisten",e,tostring(f))
 end
 

lib/interminitel.lua

@@ -1,63 +0,0 @@
-local imt = {}
-
-imt.ttypes = {}
-imt.ttypes.string=1
-imt.ttypes.number=2
-
-imt.ftypes = {tostring,tonumber}
-
-function imt.to16bn(n)
- return string.char(math.floor(n/256))..string.char(math.floor(n%256))
-end
-function imt.from16bn(s)
- return (string.byte(s,1,1)*256)+string.byte(s,2,2)
-end
-
-function imt.encodePacket(...)
- local tArgs = {...}
- local packet = string.char(#tArgs%256)
- for _,segment in ipairs(tArgs) do
-  local segtype = type(segment)
-  segment = tostring(segment)
-  packet = packet .. imt.to16bn(segment:len()) .. string.char(imt.ttypes[segtype]) .. tostring(segment)
- end
- packet = imt.to16bn(packet:len()) .. packet
- return packet
-end
-
-function imt.decodePacket(s)
- local function getfirst(n)
-  local ns = s:sub(1,n)
-  s=s:sub(n+1)
-  return ns
- end
- if s:len() < 2 then return false end
- local plen = imt.from16bn(getfirst(2))
- local segments = {}
- if s:len() < plen then return false end
- local nsegments = string.byte(getfirst(1))
- --print(tostring(plen).." bytes, "..tostring(nsegments).." segments")
- for i = 1, nsegments do
-  local seglen = imt.from16bn(getfirst(2))
-  local segtype = imt.ftypes[string.byte(getfirst(1))]
-  local segment = segtype(getfirst(seglen))
-  --print(seglen,segtype,segment,type(segment))
-  segments[#segments+1] = segment
- end
- return table.unpack(segments)
-end
-function imt.getRemainder(s)
- local function getfirst(n)
-  local ns = s:sub(1,n)
-  s=s:sub(n+1)
-  return ns
- end
- local plen = imt.from16bn(getfirst(2))
- if s:len() > plen then
-  getfirst(plen)
-  return s
- end
- return nil
-end
-
-return imt

lib/liblz16.lua

@@ -0,0 +1,53 @@
+local lz = require "lzss"
+local buffer = require "buffer"
+
+lz16 = {}
+
+local function readBuffer(fi)
+ local stream = {}
+ if fi:read(4) ~= "lz16" then
+  return false, "not an lz16 archive"
+ end
+ function stream.read()
+  local len = string.unpack(">I2", fi:read(2) or "\0\0")
+  if len < 1 then
+   return nil
+  end
+  if os.sleep then os.sleep(0) else coroutine.yield() end
+  return lz.decompress(fi:read(len))
+ end
+ function stream.close()
+  fi:close()
+ end
+ return buffer.new("rb",stream)
+end
+
+local function writeBuffer(fo)
+ local stream = {}
+ function stream:write(data)
+  local cblock = lz.compress(data)
+  fo:write(string.pack(">I2", cblock:len()) .. cblock)
+  return cblock:len()+2
+ end
+ function stream.close()
+  fo:close()
+ end
+ fo:write("lz16") -- write header
+ return buffer.new("wb",stream)
+end
+
+function lz16.buffer(stream) -- table -- table -- Wrap a stream to read or write LZ16.
+ if stream.mode.w then
+  return writeBuffer(stream)
+ end
+ return readBuffer(stream)
+end
+
+function lz16.open(fname, mode) -- string string -- table -- Open file *fname* to read or write LZ16-compressed data depending on *mode*
+ local f = io.open(fname, mode)
+ if not f then return false end
+ f.mode.b = true
+ return lz16.buffer(f)
+end
+
+return lz16

lib/libmtar.lua

@@ -0,0 +1,49 @@
+local mtar = {}
+local versions = {}
+versions[0] = {nlf = ">I2", flf = ">I2"} -- original version format
+versions[1] = {nlf = ">I2", flf = ">I8"} -- extended file size format
+mtar.versions = versions
+
+local function cleanPath(path)
+ local pt = {}
+ for segment in path:gmatch("[^/]+") do
+  if segment == ".." then
+   pt[#pt] = nil
+  elseif segment ~= "." then
+   pt[#pt+1] = segment
+  end
+ end
+ return table.concat(pt,"/")
+end
+
+function mtar.genHeader(fname,len,version) -- string number -- string -- generate a header for file *fname* when provided with file length *len*
+ version=version or 1
+ return string.format("\255\255%s%s%s%s", string.char(version), string.pack(versions[version].nlf,fname:len()), fname, string.pack(versions[version].flf,len))
+end
+
+function mtar.iter(stream) -- table -- function -- Given buffer *stream*, returns an iterator suitable for use with *for* that returns, for each iteration, the file name, a function to read from the file, and the length of the file.
+ local remain = 0
+ local function read(n)
+  local rb = stream:read(math.min(n,remain)) or ""
+  remain = remain - rb:len()
+  return rb
+ end
+ return function()
+  while remain > 0 do
+   remain=remain-(#stream:read(math.min(remain,2048)) or "")
+  end
+  local version = 0
+  local nlen = string.unpack(">I2", stream:read(2) or "\0\0")
+  if nlen == 0 then
+   return
+  elseif nlen == 65535 then -- versioned header
+   version = string.byte(stream:read(1))
+   nlen = string.unpack(versions[version].nlf, stream:read(string.packsize(versions[version].nlf)))
+  end
+  local name = cleanPath(stream:read(nlen))
+  remain = string.unpack(versions[version].flf, stream:read(string.packsize(versions[version].flf)))
+  return name, read, remain
+ end
+end
+
+return mtar

lib/lzss.lua

@@ -0,0 +1,123 @@
+--[[----------------------------------------------------------------------------
+
+	LZSS - encoder / decoder
+
+	This is free and unencumbered software released into the public domain.
+
+	Anyone is free to copy, modify, publish, use, compile, sell, or
+	distribute this software, either in source code form or as a compiled
+	binary, for any purpose, commercial or non-commercial, and by any
+	means.
+
+	In jurisdictions that recognize copyright laws, the author or authors
+	of this software dedicate any and all copyright interest in the
+	software to the public domain. We make this dedication for the benefit
+	of the public at large and to the detriment of our heirs and
+	successors. We intend this dedication to be an overt act of
+	relinquishment in perpetuity of all present and future rights to this
+	software under copyright law.
+
+	THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+	EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+	MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+	IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+	OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+	ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+	OTHER DEALINGS IN THE SOFTWARE.
+
+	For more information, please refer to <http://unlicense.org/>
+
+--]]----------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+local M = {}
+local string, table = string, table
+
+--------------------------------------------------------------------------------
+local POS_BITS = 12
+local LEN_BITS = 16 - POS_BITS
+local POS_SIZE = 1 << POS_BITS
+local LEN_SIZE = 1 << LEN_BITS
+local LEN_MIN = 3
+
+--------------------------------------------------------------------------------
+function M.compress(input)
+	local offset, output = 1, {}
+	local window = ''
+
+	local function search()
+		for i = LEN_SIZE + LEN_MIN - 1, LEN_MIN, -1 do
+			local str = string.sub(input, offset, offset + i - 1)
+			local pos = string.find(window, str, 1, true)
+			if pos then
+				return pos, str
+			end
+		end
+	end
+
+	while offset <= #input do
+		local flags, buffer = 0, {}
+
+		for i = 0, 7 do
+			if offset <= #input then
+				local pos, str = search()
+				if pos and #str >= LEN_MIN then
+					local tmp = ((pos - 1) << LEN_BITS) | (#str - LEN_MIN)
+					buffer[#buffer + 1] = string.pack('>I2', tmp)
+				else
+					flags = flags | (1 << i)
+					str = string.sub(input, offset, offset)
+					buffer[#buffer + 1] = str
+				end
+				window = string.sub(window .. str, -POS_SIZE)
+				offset = offset + #str
+			else
+				break
+			end
+		end
+
+		if #buffer > 0 then
+			output[#output + 1] = string.char(flags)
+			output[#output + 1] = table.concat(buffer)
+		end
+	end
+
+	return table.concat(output)
+end
+
+--------------------------------------------------------------------------------
+function M.decompress(input)
+	local offset, output = 1, {}
+	local window = ''
+
+	while offset <= #input do
+		local flags = string.byte(input, offset)
+		offset = offset + 1
+
+		for i = 1, 8 do
+			local str = nil
+			if (flags & 1) ~= 0 then
+				if offset <= #input then
+					str = string.sub(input, offset, offset)
+					offset = offset + 1
+				end
+			else
+				if offset + 1 <= #input then
+					local tmp = string.unpack('>I2', input, offset)
+					offset = offset + 2
+					local pos = (tmp >> LEN_BITS) + 1
+					local len = (tmp & (LEN_SIZE - 1)) + LEN_MIN
+					str = string.sub(window, pos, pos + len - 1)
+				end
+			end
+			flags = flags >> 1
+			if str then
+				output[#output + 1] = str
+				window = string.sub(window .. str, -POS_SIZE)
+			end
+		end
+	end
+
+	return table.concat(output)
+end
+
+return M

lib/minitel.lua

@@ -12,7 +12,7 @@ net.minport = 32768
 net.maxport = 65535
 net.openports = {}
 
-function net.genPacketID() -- generate a random 16-character string, for use in packet IDs
+function net.genPacketID() -- -- string -- generate a random 16-character string, for use in packet IDs
  local npID = ""
  for i = 1, 16 do
   npID = npID .. string.char(math.random(32,126))
@@ -20,11 +20,11 @@ function net.genPacketID() -- generate a random 16-character string, for use in
  return npID
 end
 
-function net.usend(to,port,data,npID) -- send an unreliable packet to host *to* on port *port* with data *data*, optionally with the packet ID *npID*
+function net.usend(to,port,data,npID) -- string number string string -- -- send an unreliable packet to host *to* on port *port* with data *data*, optionally with the packet ID *npID*
  computer.pushSignal("net_send",0,to,port,data,npID)
 end
 
-function net.rsend(to,port,data,block) -- send a reliable packet to host *to* on port *port* with data *data*, with *block* set to true to disable blocking
+function net.rsend(to,port,data,block) -- string number string boolean -- boolean -- send a reliable packet to host *to* on port *port* with data *data*, with *block* set to true to disable blocking
  local pid, stime = net.genPacketID(), computer.uptime() + net.streamdelay
  computer.pushSignal("net_send",1,to,port,data,pid)
  if block then return false end
@@ -37,7 +37,7 @@ end
 
 -- ordered packet delivery, layer 4?
 
-function net.send(to,port,ldata) -- send arbitrary data *ldata* reliably to host *to* on port *port*
+function net.send(to,port,ldata) -- string number string -- boolean -- send arbitrary data *ldata* reliably to host *to* on port *port*
  local tdata = {}
  if ldata:len() > net.mtu then
   for i = 1, ldata:len(), net.mtu do
@@ -112,7 +112,7 @@ local function socket(addr,port,sclose)
  return conn
 end
 
-function net.open(to,port) -- open a socket to host *to* on port *port*
+function net.open(to,port) -- string number -- buffer -- open a socket to host *to* on port *port*
  if not net.rsend(to,port,"openstream") then return false, "no ack from host" end
  local st = computer.uptime()+net.streamdelay
  local est = false
@@ -139,7 +139,7 @@ function net.open(to,port) -- open a socket to host *to* on port *port*
  return socket(to,data,sclose)
 end
 
-function net.listen(port) -- listen for connections on port *port* in a blocking manner
+function net.listen(port) -- number -- buffer -- listen for connections on port *port* in a blocking manner
  repeat
   _, from, rport, data = event.pull("net_msg")
  until rport == port and data == "openstream"
@@ -150,7 +150,7 @@ function net.listen(port) -- listen for connections on port *port* in a blocking
  return socket(from,nport,sclose)
 end
 
-function net.flisten(port,listener) -- run function *listener* on a connection to *port*
+function net.flisten(port,listener) -- number function -- function -- run function *listener* on a connection to *port*
  local function helper(_,from,rport,data)
   if rport == port and data == "openstream" then
    local nport = math.random(net.minport,net.maxport)

lib/netutil.lua

@@ -1,12 +1,11 @@
 local computer = require "computer"
 local minitel = require "minitel"
 local event = require "event"
-local ufs = require "unionfs"
 local rpc = require "rpc"
 local netutil = {}
 
-function netutil.importfs(host,rpath,lpath) -- import filesystem *rpath* from *host* and attach it to *lpath*
+function netutil.importfs(host,rpath,lpath) -- string string string -- boolean -- Import filesystem *rpath* from *host* and attach it to *lpath*.
- local px = rpc.proxy(host,rpath.."_")
+ local px = rpc.proxy(host,"fs_"..rpath.."_")
  function px.getLabel()
   return host..":"..rpath
  end
@@ -14,17 +13,25 @@ function netutil.importfs(host,rpath,lpath) -- import filesystem *rpath* from *h
  return fs.mount(lpath,px)
 end
 
-function netutil.exportfs(path) -- export the directory *path* over RPC
+function netutil.exportfs(path) -- string -- boolean -- Export the directory *path* over RPC.
  local path = "/"..table.concat(fs.segments(path),"/")
- local px = ufs.create(path)
+ local px = require("unionfs").create(path)
+ function px.dirstat(p)
+  local rt = {}
+  for k,v in ipairs(px.list(p)) do
+   local fp = p.."/"..v
+   rt[v] = {px.isDirectory(fp), px.size(fp), px.lastModified(fp)}
+  end
+  return rt
+ end
  for k,v in pairs(px) do
-  rpc.register(path.."_"..k,v)
+  rpc.register("fs_"..path.."_"..k,v)
-  print(path.."_"..k)
+  print("fs_"..path.."_"..k)
  end
  return true
 end
 
-function netutil.ping(addr,times,timeout, silent) -- Request acknowledgment from *addr*, waiting *timeout* seconds each try, and try *times* times. If *silent* is true, don't print status. Returns true if there was at least one successful ping, the number of successes, the number of failures, and the average round trip time.
+function netutil.ping(addr,times,timeout,silent) -- string number number boolean -- boolean number number number -- Request acknowledgment from *addr*, waiting *timeout* seconds each try, and try *times* times. If *silent* is true, don't print status. Returns true if there was at least one successful ping, the number of successes, the number of failures, and the average round trip time.
  local times, timeout = times or 5, timeout or 30
  local success, fail, time, avg = 0, 0, 0, 0
  for i = 1, times do
@@ -46,7 +53,7 @@ function netutil.ping(addr,times,timeout, silent) -- Request acknowledgment from
  return success > 0, success, fail, avg
 end
 
-function netutil.nc(host,port)
+function netutil.nc(host,port) -- string number -- boolean -- Starts an interactive Minitel socket connection to *host* on *port*, primarily for remote login. Returns whether the attempt was successful.
  port = port or 22
  local socket = minitel.open(host,port)
  if not socket then return false end
@@ -66,6 +73,7 @@ function netutil.nc(host,port)
    socket:write(b.."\n")
   end
  until socket.state ~= "open"
+ return true
 end
 
 return netutil

lib/pkgfs.lua

@@ -0,0 +1,146 @@
+local mtar = require "libmtar"
+local w, lz16 = pcall(require, "liblz16")
+if not w then lz16 = nil end
+
+pkgfs = {}
+pkgfs.files = {}
+local findex = {}
+local handles = {}
+local hc = 0
+
+local function rfalse()
+ return false
+end
+local function rzero()
+ return 0
+end
+
+pkgfs.component = {seek = rfalse, makeDirectory = rfalse, write = rfalse, rename = rfalse, setlabel = rfalse, spaceUsed = rzero, spaceTotal = rzero, lastModified = rzero, address = "pkgfs"}
+
+local function fopen(path,comp)
+ local f
+ if comp and lz16 then
+  f = lz16.open(path,"rb")
+ else
+  f = io.open(path,"rb")
+ end
+ return f
+end
+
+local function fnormalize(s)
+ return table.concat(fs.segments(s),"/")
+end
+
+function pkgfs.component.exists(path)
+ path = fnormalize(path)
+ return findex[path] and true
+end
+
+function pkgfs.component.list(path)
+ path = fnormalize(path).."/"
+ local ft,rt = {},{}
+ for k,v in pairs(findex) do
+  k="/"..k
+  if k:match(path.."([^/]+)/.+") then
+   ft[k:match(path.."([^/]+)/.+").."/"] = true
+  elseif k:match(path.."([^/]+)") then
+   ft[k:match(path.."([^/]+)")] = true
+  end
+ end
+ for k,v in pairs(ft) do
+  rt[#rt+1] = k
+ end
+ return rt
+end
+function pkgfs.component.isDirectory(path)
+ path = fnormalize(path).."/"
+ for k,v in pairs(findex) do
+  k="/"..k
+  if k:match(path.."([^/]+)/.+") then
+   return true
+  end
+ end
+ return false
+end
+function pkgfs.component.size(path)
+ path=fnormalize(path)
+ if not findex[path] then return false end
+ local f = fopen(findex[path][1], findex[path][2])
+ for fname, read, fsize in mtar.iter(f) do
+  if fname == path then
+   return fsize
+  end
+ end
+ return false
+end
+
+function pkgfs.component.open(path,mode)
+ path=fnormalize(path)
+ if mode:find("w") or mode:find("a") or not findex[path] then
+  return false
+ end
+ local f = fopen(findex[path][1],findex[path][2])
+ for fname,read,fsize in mtar.iter(f) do
+  if fname == path then
+   hc = hc + 1
+   handles[hc] = {read, f}
+   return hc
+  end
+ end
+end
+
+function pkgfs.component.read(handle, n)
+ if not handles[handle] then return false end
+ local rv = handles[handle][1](n)
+ if not rv then return nil end
+ if rv:len() < 1 then return nil end
+ return rv
+end
+
+function pkgfs.component.close(handle)
+ if not handles[handle] then return false end
+ handles[handle][2]:close()
+ handles[handle] = nil
+ return true
+end
+
+local function index()
+ findex = {}
+ for k,v in pairs(pkgfs.files) do
+  fname, comp = v[1], v[2]
+  if fname:sub(1,1) ~= "/" then
+   fname = "/"..fnormalize(os.getenv("PWD").."/"..fname)
+  end
+  local f = fopen(fname,comp)
+  if not f then error("unable to open file "..fname) end
+  for name, read, fsize in mtar.iter(f) do
+   findex[fnormalize(name)] = {fname,comp}
+  end
+  f:close()
+ end
+ return true
+end
+
+function pkgfs.add(fname,comp) -- string boolean -- boolean -- Add a package as specified in *fname* to the pkgfs component. If *comp* is true, read it as a LZ16-compressed package.
+ pkgfs.files[#pkgfs.files+1] = {fname,comp}
+ return index()
+end
+function pkgfs.remove(fname) -- string -- boolean -- Removes the package specified by *fname* from the pkgfs index.
+ for k,v in pairs(pkgfs.files) do
+  if v[1] == fname then
+   table.remove(pkgfs.files,k)
+  end
+ end
+ return index()
+end
+
+fs.makeDirectory("/pkg")
+fs.mount("/pkg",pkgfs.component)
+for _,file in ipairs(fs.list("/boot/pkg/")) do
+ if file:sub(-5) == ".mtar" then
+  pcall(pkgfs.add,"/boot/pkg/"..file)
+ elseif file:sub(-9) == ".mtar.lss" then
+  pcall(pkgfs.add,"/boot/pkg/"..file,true)
+ end
+end
+return pkgfs

lib/pkgman.lua

@@ -0,0 +1,193 @@
+local serial = require "serialization"
+local dl = require "download"
+local mtar = require "libmtar"
+local pkg = {}
+pkg.cfgPath = "/boot/cfg/pkg"
+pkg.sourcePath = pkg.cfgPath .. "/sources.cfg"
+pkg.installedPath = pkg.cfgPath .. "/installed.cfg"
+local w, lz16 = pcall(require,"liblz16")
+if not w then lz16 = nil end
+fs.makeDirectory("/boot/pkg")
+fs.makeDirectory("/boot/cfg/pkg")
+require "pkgfs"
+local kver,kvar = _OSVERSION:match("(%x+)%-([^-]-)$")
+kver,kvar = kver or "unknown", kvar or "base"
+
+local function getSources()
+ local f = io.open(pkg.sourcePath,"rb")
+ if not f then return {main={path="https://oc.shadowkat.net/psychos/pkg",cache=true,name="main"}} end
+ local c = f:read("*a")
+ f:close()
+ return serial.unserialize(c)
+end
+local function saveSources(t)
+ fs.makeDirectory(pkg.cfgPath)
+ local f = io.open(pkg.sourcePath,"wb")
+ f:write(serial.serialize(t))
+ f:close()
+end
+
+local function getInstalled()
+ local f = io.open(pkg.installedPath,"rb")
+ if not f then return {psychos={version=kver},["kernel-"..kvar]={version=kver}} end
+ local c = f:read("*a")
+ f:close()
+ return serial.unserialize(c)
+end
+local function saveInstalled(t)
+ fs.makeDirectory(pkg.cfgPath)
+ local f = io.open(pkg.installedPath,"wb")
+ if not f then return false end
+ f:write(serial.serialize(t))
+ f:close()
+end
+
+local function getRepoMeta(repo)
+ if not getSources()[repo].cache or not fs.exists("/boot/cfg/pkg/repo-"..repo..".cfg") then
+  dl(getSources()[repo].path.."/packages.cfg","/boot/cfg/pkg/repo-"..repo..".cfg")
+ end
+ local f = io.open("/boot/cfg/pkg/repo-"..repo..".cfg","rb")
+ local rt = serial.unserialize(f:read("*a"))
+ f:close()
+ if not getSources()[repo].cache then
+  fs.remove("/boot/cfg/pkg/repo-"..repo..".cfg")
+ end
+ return rt
+end
+
+local function activatePackage(path,compressed)
+ require("pkgfs").add(path,compressed)
+end
+local function deactivatePackage(path)
+ require("pkgfs").remove(path)
+end
+local function fnormalize(s)
+ return table.concat(fs.segments(s),"/")
+end
+local function installSystemPackage(path,comp)
+ local f
+ if comp and lz16 then
+  f = lz16.open(path,"rb")
+ else
+  f = io.open(path,"rb")
+ end
+ for fname, read, size in mtar.iter(f) do
+  local opath = "/boot/"..fnormalize(fname)
+  print(opath..": "..tostring(size))
+  fs.makeDirectory(opath:match("(.+)/[^/]+"))
+  local of = io.open(opath,"wb")
+  if not of then error("unable to open "..opath.." for writing") end
+  local tmp
+  repeat
+   tmp = read(2048) or ""
+   of:write(tmp)
+  until not tmp or tmp:len() < 1
+  of:close()
+ end
+ return true
+end
+
+function pkg.addRepo(name,path,cache) -- string string boolean -- boolean -- Adds a repository, referred to as *name*, to the list of package sources, with the remote path *path*. If *cache* is set, keep a local copy of the repository index.
+ local sources = getSources()
+ sources[name] = {path=path,cache=cache,name=name}
+ saveSources(sources)
+end
+
+function pkg.delRepo(name) -- string -- boolean -- Removes a repository from the list of repositories.
+ local sources = getSources()
+ sources[name] = nil
+ saveSources(sources)
+end
+
+function pkg.update() -- Re-download cached repository indexes.
+ for repo,meta in pairs(getSources()) do
+  fs.remove("/boot/cfg/pkg/repo-"..repo..".cfg")
+  if meta.cache then
+   getRepoMeta(repo)
+  end
+ end
+end
+
+function pkg.list(filter,installed) -- string boolean -- -- Print a list of available packages matching *filter*, optionally filtering to only installed packages if *installed* is set.
+ filter = filter or ""
+ local pkglist = {}
+ for repo,_ in pairs(getSources()) do
+  for pkg,meta in pairs(getRepoMeta(repo)) do
+   if pkg:find(filter) or (pkg.meta or ""):find(filter) then
+    meta.repo = repo
+    pkglist[pkg] = meta
+   end
+  end
+ end
+ for k,v in pairs(pkglist) do
+  if v.system then io.write("\27[31m") end
+  print(string.format("%s/%s: %s\27[0m\n %s\n Authors: %s",v.repo,k,v.name,v.description,v.authors))
+ end
+end
+
+function pkg.getMeta(pkgname) -- string -- table -- Returns the metadata for a the package specified in *pkgname*.
+ print("Finding package "..pkgname)
+ for repo,info in pairs(getSources()) do
+  local pkg = getRepoMeta(repo)[pkgname]
+  if pkg then
+   print("Package "..pkgname.." located in repo "..repo.." at "..info.path)
+   pkg.repository = info
+   return pkg
+  end
+ end
+end
+
+function pkg.get(pkgname,auto) -- string boolean -- boolean -- Downloads and mounts a package, identified as *pkgname,* onto the pkgfs. Setting *auto* will flag the package as automatically installed; this is used for dependencies.
+ local pkginfo = pkg.getMeta(pkgname)
+ if not pkginfo then error("unable to locate package "..pkgname) end
+ pkginfo.manual = not auto
+ fs.makeDirectory("/boot/pkg")
+ for k,v in ipairs(pkginfo.dependencies or {}) do
+  if not getInstalled()[v] then
+   pkg.get(v,true)
+  end
+ end
+ dl(pkginfo.repository.path.."/"..pkginfo.filename,"/boot/pkg/"..pkginfo.filename)
+ local installed = getInstalled()
+ installed[pkgname] = pkginfo
+ saveInstalled(installed)
+ if pkginfo.system then
+  local rv = installSystemPackage("/boot/pkg/"..pkginfo.filename,pkginfo.compressed)
+  fs.remove("/boot/pkg/"..pkginfo.filename)
+  return rv
+ end
+ pcall(activatePackage,"/boot/pkg/"..pkginfo.filename,pkginfo.compressed)
+ return true
+end
+
+function pkg.upgrade(force) -- boolean -- -- Upgrades all packages on the system to the current version stored in the relevant repository. If *force* is set, re-download all packages.
+ pkg.update()
+ fs.makeDirectory("/boot/pkg")
+ local installed = getInstalled()
+ for repo,info in pairs(getSources()) do
+  for pkgname,pkginfo in pairs(getRepoMeta(repo)) do
+   if installed[pkgname] and pkginfo.version ~= installed[pkgname].version or force then
+    pkg.remove(pkgname)
+    pkg.get(pkgname,pkginfo.auto)
+   end
+  end
+ end
+end
+
+function pkg.remove(pkgname) -- string -- boolean -- Remove the package *pkgname* from the pkgfs and package directory.
+ local installed = getInstalled()
+ local pkginfo = installed[pkgname]
+ if not pkginfo then return true end
+ pcall(deactivatePackage,"/boot/pkg/"..pkginfo.filename)
+ fs.remove("/boot/pkg/"..pkginfo.filename)
+ if pkginfo.system then
+  for k,v in pairs(pkginfo.files) do
+   fs.remove(v)
+  end
+ end
+ installed[pkgname] = nil
+ saveInstalled(installed)
+ return true
+end
+
+return pkg

lib/rc.lua

@@ -1,10 +1,11 @@
 local serial = require "serialization"
 
 local rc = {}
+rc.paths = "/boot/service\n/pkg/service"
 rc.pids = {}
 local service = {}
 local cfg = {}
-cfg.enabled = {"getty","minitel"}
+cfg.enabled = {"getty","minitel","fsmanager"}
 
 local function loadConfig()
  local f = io.open("/boot/cfg/rc.cfg","rb")
@@ -22,20 +23,21 @@ local function saveConfig()
  return true
 end
 
-function rc.load(name,force)
+function rc.load(name,force) -- string boolean -- table -- Attempts to load service *name*, and if *force* is true, replaces the current instance.
- if force then
+ if not service[name] or force then
-  rc.stop(name)
+  for d in rc.paths:gmatch("[^\n]+") do
-  service[name] = nil
+   if fs.exists(d.."/"..name..".lua") then
+    service[name] = runfile(d.."/"..name..".lua")
+   end
+  end
  end
- if service[name] then return true end
+ if service[name] then
- service[name] = setmetatable({},{__index=_G})
+  return service[name]
- local f = io.open("/boot/service/"..name..".lua","rb")
+ end
- local res = load(f:read("*a"),name,"t",service[name])()
+ return false, "unable to load service "..name
- f:close()
- return res
 end
 
-function rc.stop(name,...)
+function rc.stop(name,...) -- string -- boolean string -- Stops service *name*, supplying *...* to the stop function. Returns false and a reason if this fails.
  if not service[name] then return false, "service not found" end
  if service[name].stop then
   service[name].stop(...)
@@ -47,7 +49,7 @@ function rc.stop(name,...)
  rc.pids[name] = nil
 end
 
-function rc.start(name,...)
+function rc.start(name,...) -- string -- boolean string -- Stops service *name*, supplying *...* to the stop function. Returns false and a reason if this fails.
  rc.load(name)
  if not service[name] then return false, "service not found" end
  local rv = {service[name].start(...)}
@@ -56,19 +58,19 @@ function rc.start(name,...)
  end
 end
 
-function rc.restart(name)
+function rc.restart(name) -- string -- -- Restarts service *name* using rc.stop and rc.start.
  rc.stop(name)
  rc.start(name)
 end
 
-function rc.enable(name)
+function rc.enable(name) -- string -- -- Enables service *name* being started on startup.
  for k,v in pairs(cfg.enabled) do
   if v == name then return false end
  end
  cfg.enabled[#cfg.enabled+1] = name
  saveConfig()
 end
-function rc.disable(name)
+function rc.disable(name) -- string -- -- Disables service *name* being started on startup.
  local disabled = false
  for k,v in pairs(cfg.enabled) do
   if v == name then table.remove(cfg.enabled,k) disabled = true break end

lib/rpc.lua

@@ -5,19 +5,36 @@ local rpc = {}
 _G.rpcf = {}
 rpc.port = 111
 
-local function rpcexec(_, from, port, data)
+local function setacl(self, fname, host)
- if port == rpc.port then
+ self[fname] = self[fname] or {}
-  local rpcrq = serial.unserialize(data)
+ self[fname][host] = true
-  local rpcn, rpcid = table.remove(rpcrq,1), table.remove(rpcrq,1)
+end
-  if rpcf[rpcn] then
+-- function rpc.allow(fn, host) -- string string -- -- Enable the allow list for function *fname* and add *host* to it.
-   local rt = {pcall(rpcf[rpcn],table.unpack(rpcrq))}
+-- function rpc.deny(fn, host) -- string string -- -- Enable the deny list for function *fname* and add *host* to it.
-   if rt[1] == true then
+rpc.allow = setmetatable({},{__call=setacl})
-    table.remove(rt,1)
+rpc.deny = setmetatable({},{__call=setacl})
-   end
+
-   minitel.send(from,port,serial.serialize({rpcid,table.unpack(rt)}))
+local function isPermitted(host,fn)
-  else
+ if rpc.allow[fn] then
-  end
+  return rpc.allow[fn][host] or false
  end
+ if rpc.deny[fn] and rpc.deny[fn][host] then
+  return false
+ end
+ return true
+end
+
+local function rpcexec(_, from, port, data)
+ if port ~= rpc.port then return false end
+ os.spawn(function()
+  local rpcrq = serial.unserialize(data) or {}
+  if rpcf[rpcrq[1]] and isPermitted(from,rpcrq[1]) then
+   os.setenv("RPC_CLIENT",from)
+   minitel.send(from,port,serial.serialize({rpcrq[2],pcall(rpcf[rpcrq[1]],table.unpack(rpcrq,3))}))
+  elseif type(rpcrq[2]) == "string" then
+   minitel.send(from,port,serial.serialize({rpcrq[2],false,"function unavailable"}))
+ end
+ end,"rpc worker for "..tostring(from))
 end
 function rpcf.list()
  local rt = {}
@@ -27,7 +44,7 @@ function rpcf.list()
  return rt
 end
 
-function rpc.call(hostname,fn,...)
+function rpc.call(hostname,fn,...) -- string string -- boolean -- Calls exported function *fn* on host *hostname*, with parameters *...*, returning whatever the function returns, or false.
  if hostname == "localhost" then
   return rpcf[fn](...)
  end
@@ -39,12 +56,15 @@ function rpc.call(hostname,fn,...)
   local _, from, port, data = event.pull(30, "net_msg", hostname, rpc.port)
   rt = serial.unserialize(tostring(data)) or {}
  until (type(rt) == "table" and rt[1] == rv) or computer.uptime() > st + 30
- if table.remove(rt,1) == rv then
+ if rt[1] == rv then
-  return table.unpack(rt)
+  if rt[2] then
+   return table.unpack(rt,3)
+  end
+  error(rt[3])
  end
- return false
+ error("timed out")
 end
-function rpc.proxy(hostname,filter)
+function rpc.proxy(hostname,filter) -- string string -- table -- Returns a component.proxy()-like table from the functions on *hostname* with names matching *filter*.
  filter=(filter or "").."(.+)"
  local fnames = rpc.call(hostname,"list")
  if not fnames then return false end
@@ -59,7 +79,7 @@ function rpc.proxy(hostname,filter)
  end
  return rt
 end
-function rpc.register(name,fn)
+function rpc.register(name,fn) -- string function -- -- Registers a function to be exported by the RPC library.
  local rpcrunning = false
  for k,v in pairs(os.tasks()) do
   if os.taskInfo(v).name == "rpc daemon" then
@@ -69,11 +89,17 @@ function rpc.register(name,fn)
  if not rpcrunning then
   os.spawn(function()
    while true do
-    rpcexec(event.pull("net_msg"))
+    pcall(rpcexec,event.pull("net_msg"))
    end
   end,"rpc daemon")
  end
  rpcf[name] = fn
 end
 
+function rpc.unregister(name) -- string -- -- Removes a function from the RPC function registry, clearing any ACL rules.
+ rpcf[name] = nil
+ rpc.allow[name] = nil
+ rpc.deny[name] = nil
+end
+
 return rpc

lib/serialization.lua

@@ -3,7 +3,7 @@ local local_pairs=function(tbl)
  local mt=getmetatable(tbl)
  return (mt and mt.__pairs or pairs)(tbl)
 end
-function serial.serialize(value,af) -- serialize *value* into a string. If *af* is true, allow functions. This breaks unserialization.
+function serial.serialize(value,af) -- boolean -- string -- serialize *value* into a string. If *af* is true, allow functions. This breaks unserialization.
  local kw={["and"]=true,["break"]=true,["do"]=true,["else"]=true,["elseif"]=true,["end"]=true,["false"]=true,["for"]=true,["function"]=true,["goto"]=true,["if"]=true,["in"]=true,["local"]=true,["nil"]=true,["not"]=true,["or"]=true,["repeat"]=true,["return"]=true,["then"]=true,["true"]=true,["until"]=true,["while"]=true}
  local id="^[%a_][%w_]*$"
  local ts={}
@@ -40,7 +40,7 @@ function serial.serialize(value,af) -- serialize *value* into a string. If *af*
   else error("ut "..t) end end
  return s(value, 1)
 end
-function serial.unserialize(data) -- return *data*, but unserialized
+function serial.unserialize(data) -- string -- -- return *data*, but unserialized
  checkArg(1, data, "string")
  local result, reason = load("return " .. data, "=data", _, {math={huge=math.huge}})
  if not result then return nil, reason end

lib/shell.lua

@@ -21,24 +21,29 @@ end
 function shell.interactive()
  local shenv = setmetatable({}, {__index=shindex})
  local run = true
+ os.setenv("PATH",{"/boot/exec","/pkg/exec"})
  function shenv.quit()
   run = false
  end
  while run do
   io.write(string.format("\27[32m%s:%s>\27[0m ",os.getenv("HOSTNAME") or "localhost",(os.getenv("PWD") or _VERSION)))
-  local input = io.read()
+  local w,input = pcall(io.read)
-  if input:sub(1,1) == "=" then
+  if not w then
-   input = "return "..input:sub(2)
+   print("\27[31m^C")
-  end
-  local f, r = load(input, "shell", "t", shenv)
-  if not f then
-   print("\27[31m"..r)
   else
-   local rt = {pcall(f)}
+   if input:sub(1,1) == "=" then
-   local rs = table.remove(rt,1)
+    input = "return "..input:sub(2)
-   if not rs then io.write("\27[31m") end
+   end
-   for k,v in pairs(rt) do
+   local f, r = load(input, "shell", "t", shenv)
-    print(formatValue(v))
+   if not f then
+    print("\27[31m"..r)
+   else
+    local rt = {xpcall(f,debug.traceback)}
+    local rs = table.remove(rt,1)
+    if not rs then io.write("\27[31m") end
+    for k,v in pairs(rt) do
+     print(formatValue(v))
+    end
    end
   end
  end

lib/shutil.lua

@@ -2,6 +2,7 @@ local component = require "component"
 local fs = require "fs"
 local shell = require "shell"
 local ed = require "ed"
+local doc = require "doc"
 local shutil = {}
 shutil.ed = ed.interactive
 shutil.vi = ed.visual
@@ -18,7 +19,7 @@ local function wrapUnits(n)
  return tostring(math.floor(n))..(scale[count] or "")
 end
 
-function shutil.import(lib)
+function shutil.import(lib) -- string -- boolean -- Imports the functions from library *lib* into the shell environment.
  local cE = os.getenv("INCLUDE") or shell.include
  local nE = {}
  for k,v in pairs(cE) do
@@ -30,7 +31,7 @@ function shutil.import(lib)
  return true
 end
 
-function shutil.unimport(lib)
+function shutil.unimport(lib) -- string -- boolean -- Removes the functions from *lib* from the shell environment.
  local cE = os.getenv("INCLUDE") or shell.include
  local nE = {}
  for k,v in pairs(cE) do
@@ -42,7 +43,7 @@ function shutil.unimport(lib)
  return true
 end
 
-function shutil.ls(...)
+function shutil.ls(...) -- string -- -- Prints contents of directories specified as *...*.
  local tA = {...}
  if not tA[1] then tA[1] = "." end
  for _,d in ipairs(tA) do
@@ -55,7 +56,7 @@ function shutil.ls(...)
  end
 end
 
-function shutil.cat(...)
+function shutil.cat(...) -- string -- -- Outputs the contents of files specified in *...* to the standard output.
  for _,fn in ipairs({...}) do
   local f = io.open(fn,"rb")
   io.write(f:read("*a"))
@@ -63,7 +64,7 @@ function shutil.cat(...)
  end
 end
 
-function shutil.ps()
+function shutil.ps() -- Prints the processes running on the system.
  print("PID# Parent | Name")
  for k,v in pairs(os.tasks()) do
   local t = os.taskInfo(v)
@@ -71,7 +72,7 @@ function shutil.ps()
  end
 end
 
-function shutil.df()
+function shutil.df() -- Prints free disk space.
  local mt = fs.mounts()
  local ml = 0
  for k,v in pairs(mt) do
@@ -82,12 +83,12 @@ function shutil.df()
  local fstr = "%-"..tostring(ml).."s %5s %5s"
  print("fs"..(" "):rep(ml-2).."  size  used")
  for k,v in pairs(mt) do
-  local st, su = fs.spaceTotal(v), fs.spaceUsed(v)
+  local st, su = fs.spaceTotal("/"..v), fs.spaceUsed("/"..v)
   print(string.format(fstr,v,wrapUnits(st),wrapUnits(su)))
  end
 end
 
-function shutil.mount(addr,path)
+function shutil.mount(addr,path) -- string string -- boolean string -- Mounts filesystem component with address *addr* to *path* in the filesystem.
  if not addr then
   local mt = fs.mounts()
   for k,v in pairs(mt) do
@@ -113,14 +114,43 @@ function shutil.mount(addr,path)
  end
 end
 
-function shutil.free()
+function shutil.free() -- Displays used and free memory.
  print("Total  Used  Free")
  print(string.format("%5s %5s %5s",wrapUnits(computer.totalMemory()),wrapUnits(computer.totalMemory()-computer.freeMemory()),wrapUnits(computer.freeMemory())))
 end
 
+function shutil.which(name)
+ local fpath
+ for _,dir in ipairs(os.getenv("PATH")) do
+  fpath = fpath or fs.exists(string.format("%s/%s.lua",dir,name)) and string.format("%s/%s.lua",dir,name) or fs.exists(string.format("%s/%s",dir,name)) and string.format("%s/%s",dir,name)
+ end
+ return fpath
+end
+
 shutil.cd = os.chdir
 shutil.mkdir = fs.makeDirectory
 shutil.cp = fs.copy
 shutil.rm = fs.remove
 
-return shutil
+return setmetatable({}, {__index = function(t,k)
+ if shutil[k] then
+  return shutil[k]
+ end
+ local path = shutil.which(k)
+ if path then
+  local fn, e = loadfile(path)
+  if not fn then error(string.format("\n - %s",e)) end
+  return function(...)
+   local tA = {...}
+   local pid = os.spawn(function() return fn(table.unpack(tA)) end,path)
+   local ret = {require("event").pull("process_finished",pid)}
+   if not ret[3] then
+    error(string.format("\n - %s",ret[4]))
+   end
+   for i = 1, 3 do
+    table.remove(ret,1)
+   end
+   return table.unpack(ret)
+  end
+ end
+end})

lib/unionfs.lua

@@ -1,114 +0,0 @@
-local unionfs = {}
-
-local function normalise(path)
- return table.concat(fs.segments(path),"/")
-end
-
-function unionfs.create(...)
- local paths,fids,fc = {...}, {}, 0
- for k,v in pairs(paths) do
-  paths[k] = "/"..normalise(v)
- end
- local proxy = {}
- local function realpath(path)
-  path = path or ""
-  for k,v in pairs(paths) do
-   if fs.exists(v.."/"..path) then
-    return v.."/"..path
-   end
-  end
-  return paths[1].."/"..path
- end
-
- function proxy.setLabel()
-  return false
- end
- 
- function proxy.spaceUsed()
-  return fs.spaceUsed(paths[1])
- end
- function proxy.spaceTotal()
-  return fs.spaceTotal(paths[1])
- end
- function proxy.isReadOnly()
-  return fs.isReadOnly(paths[1])
- end
- function proxy.isDirectory(path)
-  return fs.isDirectory(realpath(path))
- end
- function proxy.lastModified(path)
-  return fs.lastModified(realpath(path))
- end
- function proxy.getLabel()
-  return fs.getLabel(paths[1])
- end
-
- function proxy.exists(path)
-  return fs.exists(realpath(path))
- end
- function proxy.remove(path)
-  return fs.remove(realpath(path))
- end
- function proxy.size(path)
-  return fs.size(realpath(path))
- end
-
- function proxy.list(path)
-  local nt,rt = {},{}
-  if #fs.segments(path) < 1 then
-   for k,v in pairs(paths) do
-    for l,m in ipairs(fs.list(v.."/"..path)) do
-     nt[m] = true
-    end
-   end
-   for k,v in pairs(nt) do
-    rt[#rt+1] = k
-   end
-   table.sort(rt)
-   return rt
-  else
-   return fs.list(realpath(path))
-  end
- end
-
- function proxy.open(path,mode)
-  local fh, r = fs.open(realpath(path),mode)
-  if not fh then return fh, r end
-  fids[fc] = fh
-  fc = fc + 1
-  return fc - 1
- end
-
- function proxy.close(fid)
-  if not fids[fid] then
-   return false, "file not open"
-  end
-  local rfh = fids[fid]
-  fids[fid] = nil
-  return rfh:close()
- end
- function proxy.write(fid,d)
-  if not fids[fid] then
-   return false, "file not open"
-  end
-  return fids[fid]:write(d)
- end
- function proxy.read(fid,d)
-  if not fids[fid] then
-   return false, "file not open"
-  end
-  local rb = fids[fid]:read(d)
-  if rb == "" then rb = nil end
-  return rb
- end
- function proxy.seek(fid,d)
-  if not fids[fid] then
-   return false, "file not open"
-  end
-  return fids[fid]:seek(d)
- end
-
- return proxy
-end
-
-return unionfs

lib/vcomponent.lua

@@ -1,197 +0,0 @@
-local proxylist = {}
-local proxyobjs = {}
-local typelist = {}
-local doclist = {}
-
-local oproxy = component.proxy
-function component.proxy(address)
-	checkArg(1,address,"string")
-	if proxyobjs[address] ~= nil then
-		return proxyobjs[address]
-	end
-	return oproxy(address)
-end
-
-local olist = component.list
-function component.list(filter, exact)
-	checkArg(1,filter,"string","nil")
-	local result = {}
-	local data = {}
-	for k,v in olist(filter, exact) do
-		data[#data + 1] = k
-		data[#data + 1] = v
-		result[k] = v
-	end
-	for k,v in pairs(typelist) do
-		if filter == nil or (exact and v == filter) or (not exact and v:find(filter, nil, true)) then
-			data[#data + 1] = k
-			data[#data + 1] = v
-			result[k] = v
-		end
-	end
-	local place = 1
-	return setmetatable(result, 
-		{__call=function()
-			local addr,type = data[place], data[place + 1]
-			place = place + 2
-			return addr, type
-		end}
-	)
-end
-
-local otype = component.type
-function component.type(address)
-	checkArg(1,address,"string")
-	if typelist[address] ~= nil then
-		return typelist[address]
-	end
-	return otype(address)
-end
-
-local odoc = component.doc
-function component.doc(address, method)
-	checkArg(1,address,"string")
-	checkArg(2,method,"string")
-	if proxylist[address] ~= nil then
-		if proxylist[address][method] == nil then
-			error("no such method",2)
-		end
-		if doclist[address] ~= nil then
-			return doclist[address][method]
-		end
-		return nil
-	end
-	return odoc(address, method)
-end
-
-local oslot = component.slot
-function component.slot(address)
-	checkArg(1,address,"string")
-	if proxylist[address] ~= nil then
-		return -1 -- vcomponents do not exist in a slot
-	end
-	return oslot(address)
-end
-
-local omethods = component.methods
-function component.methods(address)
-	checkArg(1,address,"string")
-	if proxylist[address] ~= nil then
-		local methods = {}
-		for k,v in pairs(proxylist[address]) do
-			if type(v) == "function" then
-				methods[k] = true -- All vcomponent methods are direct
-			end
-		end
-		return methods
-	end
-	return omethods(address)
-end
-
-local oinvoke = component.invoke
-function component.invoke(address, method, ...)
-	checkArg(1,address,"string")
-	checkArg(2,method,"string")
-	if proxylist[address] ~= nil then
-		if proxylist[address][method] == nil then
-			error("no such method",2)
-		end
-		return proxylist[address][method](...)
-	end
-	return oinvoke(address, method, ...)
-end
-
-local ofields = component.fields
-function component.fields(address)
-	checkArg(1,address,"string")
-	if proxylist[address] ~= nil then
-		return {} -- What even is this?
-	end
-	return ofields(address)
-end
-
-local componentCallback =
-{
-	__call = function(self, ...) return proxylist[self.address][self.name](...) end,
-	__tostring = function(self) return (doclist[self.address] ~= nil and doclist[self.address][self.name] ~= nil) and doclist[self.address][self.name] or "function" end
-}
-
-local vcomponent = {}
-
-function vcomponent.register(address, ctype, proxy, doc)
-	checkArg(1,address,"string")
-	checkArg(2,ctype,"string")
-	checkArg(3,proxy,"table")
-	if proxylist[address] ~= nil then
-		return nil, "component already at address"
-	elseif component.type(address) ~= nil then
-		return nil, "cannot register over real component"
-	end
-	proxy.address = address
-	proxy.type = ctype
-	local proxyobj = {}
-	for k,v in pairs(proxy) do
-		if type(v) == "function" then
-			proxyobj[k] = setmetatable({name=k,address=address},componentCallback)
-		else
-			proxyobj[k] = v
-		end
-	end
-	proxylist[address] = proxy
-	proxyobjs[address] = proxyobj
-	typelist[address] = ctype
-	doclist[address] = doc
-	computer.pushSignal("component_added",address,ctype)
-	return true
-end
-
-function vcomponent.unregister(address)
-	checkArg(1,address,"string")
-	if proxylist[address] == nil then
-		if component.type(address) ~= nil then
-			return nil, "cannot unregister real component"
-		else
-			return nil, "no component at address"
-		end
-	end
-	local thetype = typelist[address]
-	proxylist[address] = nil
-	proxyobjs[address] = nil
-	typelist[address] = nil
-	doclist[address] = nil
-	computer.pushSignal("component_removed",address,thetype)
-	return true
-end
-
-function vcomponent.list()
-	local list = {}
-	for k,v in pairs(proxylist) do
-		list[#list + 1] = {k,typelist[k],v}
-	end
-	return list
-end
-
-function vcomponent.resolve(address, componentType)
-	checkArg(1, address, "string")
-	checkArg(2, componentType, "string", "nil")
-	for k,v in pairs(typelist) do
-		if componentType == nil or v == componentType then
-			if k:sub(1, #address) == address then
-				return k
-			end
-		end
-	end
-	return nil, "no such component"
-end
-
-local r = math.random
-function vcomponent.uuid()
-	return string.format("%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x",
-	r(0,255),r(0,255),r(0,255),r(0,255),
-	r(0,255),r(0,255),
-	r(64,79),r(0,255),
-	r(128,191),r(0,255),
-	r(0,255),r(0,255),r(0,255),r(0,255),r(0,255),r(0,255))
-end
-
-return vcomponent

lib/vtansi.lua

@@ -1,7 +1,35 @@
 local vtansi = {}
-function vtansi.vtemu(gpu) -- takes GPU component proxy *gpu* and returns a function to write to it in a manner like an ANSI terminal
+local keyboardIgnore = {}
+vtansi.activeBuffers = {}
+vtansi.sequences = {
+ [28] = "\n", -- newline
+ [200] = "\27[A", -- up
+ [203] = "\27[D", -- left
+ [205] = "\27[C", -- right
+ [208] = "\27[B", -- down
+ [201] = "\27[5~", -- page up
+ [209] = "\27[6~" -- page down
+}
+vtansi.keys = {}
+vtansi.keys[0x38] = "lalt"
+vtansi.keys[0xB8] = "ralt"
+function vtansi.saveToBuffer(gpu,idx)
+ gpu.bitblt(idx, nil, nil, nil, nil, 0)
+end
+function vtansi.loadFromBuffer(gpu,idx)
+ gpu.bitblt(0, nil, nil, nil, nil, idx)
+end
+function vtansi.switchToBuffer(gpu,idx)
+ -- copy screen to the active buffer
+ vtansi.saveToBuffer(gpu,vtansi.activeBuffers[gpu.address])
+ -- copy the new buffer to the screen
+ vtansi.loadFromBuffer(gpu,idx)
+ vtansi.activeBuffers[gpu.address] = idx
+end
+function vtansi.vtemu(gpu,bn) -- table number -- function -- takes GPU component proxy *gpu* and returns a function to write to it in a manner like an ANSI terminal, either allocating a new buffer or using *bn*.
  local colours = {0x0,0xFF0000,0x00FF00,0xFFFF00,0x0000FF,0xFF00FF,0x00B6FF,0xFFFFFF}
  local mx, my = gpu.maxResolution()
+ local buffer = nil
  local cx, cy = 1, 1
  local pc = " "
  local lc = ""
@@ -12,8 +40,19 @@ function vtansi.vtemu(gpu) -- takes GPU component proxy *gpu* and returns a func
  local bg, fg = 0, 0xFFFFFF
 
  -- setup
- gpu.setResolution(mx,my)
+ if gpu.getActiveBuffer then
- gpu.fill(1,1,mx,my," ")
+  buffer = bn or gpu.allocateBuffer(mx,my)
+  vtansi.activeBuffers[gpu.address] = vtansi.activeBuffers[gpu.address] or buffer
+  local oldActiveBuffer = vtansi.activeBuffers[gpu.address]
+  gpu.setActiveBuffer(buffer)
+  gpu.setResolution(mx,my)
+  gpu.fill(1,1,mx,my," ")
+  gpu.setActiveBuffer(oldActiveBuffer)
+ else
+  gpu.setResolution(mx,my)
+  gpu.fill(1,1,mx,my," ")
+ end
+
  local function checkCursor()
   if cx > mx and lw then
    cx, cy = 1, cy+1
@@ -28,6 +67,13 @@ function vtansi.vtemu(gpu) -- takes GPU component proxy *gpu* and returns a func
  end
 
  local function termwrite(s)
+  if buffer then
+   if vtansi.activeBuffers[gpu.address] == buffer then
+    gpu.setActiveBuffer(0)
+   else
+    gpu.setActiveBuffer(buffer)
+   end
+  end
   local wb = ""
   local lb, ec = nil, nil
   local function flushwb()
@@ -50,8 +96,9 @@ function vtansi.vtemu(gpu) -- takes GPU component proxy *gpu* and returns a func
     if cc == "\n" then
      flushwb()
      cx,cy = 1, cy+1
+     checkCursor()
     elseif cc == "\t" then
-     wb=wb..(" "):rep(8*((cx+9)//8))
+     wb=wb..(" "):rep((((cx//8)+1) * 8) - cx + 1)
     elseif cc == "\27" then
      flushwb()
      mode = 1
@@ -76,20 +123,31 @@ function vtansi.vtemu(gpu) -- takes GPU component proxy *gpu* and returns a func
      if cc == "H" then
       cx, cy = math.min(mx,tA[1] or 1), math.min(my,tA[2] or 1)
      elseif cc == "A" then
-      cy = cy - (tA[1] or 1)
+      for i = 1, (tA[1] or 1) do
+       cy = cy - 1
+       checkCursor()
+      end
      elseif cc == "B" then
-      cy = cy + (tA[1] or 1)
+      for i = 1, (tA[1] or 1) do
+       cy = cy + 1
+       checkCursor()
+      end
      elseif cc == "C" then
-      cx = cx + (tA[1] or 1)
+      for i = 1, (tA[1] or 1) do
+       cx = cx + 1
+       checkCursor()
+      end
      elseif cc == "D" then
-      cx = cx - (tA[1] or 1)
+      for i = 1, (tA[1] or 1) do
+       cx = cx - 1
+       checkCursor()
+      end
      elseif cc == "s" then
       sx, sy = cx, cy
      elseif cc == "u" then
       cx, cy = sx, sy
      elseif cc == "n" and tA[1] == 6 then
       rs = string.format("%s\27[%d;%dR",rs,cx,cy)
-      dprint(string.format("reporting %d;%d as current cursor position",cx,cy))
      elseif cc == "K" and tA[1] == 1 then
       gpu.fill(1,cy,cx,1," ")
      elseif cc == "K" and tA[1] == 2 then
@@ -106,7 +164,7 @@ function vtansi.vtemu(gpu) -- takes GPU component proxy *gpu* and returns a func
      elseif cc == "m" then
       for _,num in ipairs(tA) do
        if num == 0 then
-        fg,bg,ec,lb = 0xFFFFFF,0,true,true
+        fg,bg,ec,lb = 0xFFFFFF,0,false,true
        elseif num == 7 then
         local nfg,nbg = bg, fg
         fg, bg = nfg, nbg
@@ -139,48 +197,65 @@ function vtansi.vtemu(gpu) -- takes GPU component proxy *gpu* and returns a func
   return rs, lb, ec
  end
 
- return termwrite
+ return termwrite, buffer
 end
 
-function vtansi.vtsession(gpua,scra) -- creates a process to handle the GPU and screen address combination *gpua*/*scra*. Returns read, write and "close" functions.
+function vtansi.vtsession(gpua,scra,bn) -- string string number -- function function function -- creates a process to handle the GPU and screen address combination *gpua*/*scra*, optionally using buffer number *bn* specifically. Returns read, write and "close" functions.
+ local modifiers = {}
  local gpu = component.proxy(gpua)
- gpu.bind(scra)
+-- gpu.bind(scra)
- local write = vtansi.vtemu(gpu)
+ local write, bn = vtansi.vtemu(gpu,bn)
  local kba = {}
  for k,v in ipairs(component.invoke(scra,"getKeyboards")) do
   kba[v]=true
  end
- local buf, lbuf, echo = "", true, true
+ local buf, lbuf, echo = "", false, false
- os.spawn(function() dprint(pcall(function()
+ os.spawn(function()
   while true do
-   local ty,ka,ch = coroutine.yield()
+   local ty,ka,ch,kc = coroutine.yield()
-   if ty == "key_down" and kba[ka] then
+   if kba[ka] and keyboardIgnore[ka] == bn then
-    if ch == 13 then ch = 10 end
+    keyboardIgnore[ka] = nil
-    if ch == 8 and lbuf then
+   end
-     if buf:len() > 0 then
+   if kba[ka] and vtansi.keys[kc] then
-      if echo then write("\8 \8") end
+    modifiers[vtansi.keys[kc]] = ty == "key_down"
-      buf = buf:sub(1,-2)
+   end
+   if ty == "key_down" and kba[ka] and (bn == nil or vtansi.activeBuffers[gpua] == bn) then
+    if bn and ty == "key_down" and kba[ka] and ch == 46 and kc == 52 and (modifiers.lalt or modifiers.ralt) then
+     -- next buffer
+     local allBuffers = gpu.buffers()
+     for k,v in ipairs(allBuffers) do
+      if v == vtansi.activeBuffers[gpu.address] and allBuffers[k+1] and not keyboardIgnore[ka] then
+       keyboardIgnore[ka] = bn
+       vtansi.switchToBuffer(gpu,allBuffers[k+1])
+      end
+     end
+    elseif bn and ty == "key_down" and kba[ka] and ch == 44 and kc == 51 and (modifiers.lalt or modifiers.ralt) then
+     -- previous buffer
+     local allBuffers = gpu.buffers()
+     for k,v in ipairs(allBuffers) do
+      if v == vtansi.activeBuffers[gpu.address] and allBuffers[k-1] and not keyboardIgnore[ka] then
+       keyboardIgnore[ka] = bn
+       vtansi.switchToBuffer(gpu,allBuffers[k-1])
+      end
+     end
+    else
+     local outs
+     if ch > 0 then
+      outs = string.char(ch)
+     end
+     outs = vtansi.sequences[kc] or outs
+     if outs then
+      if echo then write(outs) end
+      buf=buf..outs
      end
-    elseif ch > 0 then
-     if echo then write(string.char(ch)) end
-     buf=buf..string.char(ch)
     end
    end
   end
- end)) end,string.format("ttyd[%s:%s]",gpua:sub(1,8),scra:sub(1,8)))
+ end,string.format("ttyd[%s:%s/%i]",gpua:sub(1,8),scra:sub(1,8),tonumber(bn) or 0))
  local function bread(n)
-  local r
+  coroutine.yield()
-  if lbuf then
+  local r = buf
-   while not buf:find("\n") do
+  buf = ""
-    coroutine.yield()
-   end
-   local n = buf:find("\n")
-   r, buf = buf:sub(1,n), buf:sub(n+1)
-  else
-   r = buf
-   buf = ""
-   coroutine.yield()
-  end
   return r
  end
  local function bwrite(d)

luapreproc.lua

@@ -179,7 +179,9 @@ local env = {code = ""}
 setmetatable(env, {__index=_env})
 env:process(arg[1])
 local tmpfile = os.tmpname()
+if tmpfile:sub(#tmpfile) == "." then tmpfile = tmpfile:sub(1, #tmpfile - 1) end
 local tmpf = io.open(tmpfile, "wb")
+env.code = env.code:gsub("%-%-.-\n","\n"):gsub("\n\n","\n")
 tmpf:write(env.code)
 tmpf:close()
 --if (os.execute("lua minify.lua "..tmpfile.." > "..arg[2])) then

module/base.lua

@@ -0,0 +1,10 @@
+--#include "module/syslog.lua"
+--#include "module/sched.lua"
+--#include "module/buffer.lua"
+--#include "module/osutil.lua"
+--#include "module/fs.lua"
+--#include "module/io.lua"
+--#include "module/devfs.lua"
+--#include "module/devfs/syslog.lua"
+--#include "module/component-get.lua"
+--#include "module/loadfile.lua"

module/buffer.lua

@@ -2,7 +2,7 @@
 
 buffer = {}
 
-function buffer.new(mode, stream) -- create a new buffer in mode *mode* backed by stream object *stream*
+function buffer.new(mode, stream) -- string table -- table -- create a new buffer in mode *mode* backed by stream object *stream*
  local result = {
   mode = {},
   stream = stream,
@@ -234,26 +234,114 @@ function buffer:read(...)
  end
 
  local function readLine(chop)
-  local start = 1
+  if not self.mode.t then
-  while true do
+   local start = 1
-   local l = self.bufferRead:find("\n", start, true)
+   while true do
-   if l then
+    local l = self.bufferRead:find("\n", start, true)
-    local result = self.bufferRead:sub(1, l + (chop and -1 or 0))
+    if l then
-    self.bufferRead = self.bufferRead:sub(l + 1)
+     local result = self.bufferRead:sub(1, l + (chop and -1 or 0))
-    return result
+     self.bufferRead = self.bufferRead:sub(l + 1)
-   else
+     return result
-    start = #self.bufferRead
+    else
-    local result, reason = readChunk()
+     start = #self.bufferRead
-    if not result then
+     local result, reason = readChunk()
-     if reason then
+     if not result then
-      return nil, reason
+      if reason then
-     else -- eof
+       return nil, reason
-      local result = #self.bufferRead > 0 and self.bufferRead or nil
+      else -- eof
-      self.bufferRead = ""
+       local result = #self.bufferRead > 0 and self.bufferRead or nil
-      return result
+       self.bufferRead = ""
+       return result
+      end
      end
     end
    end
+  else
+   -- this whole thing is a house of cards. good luck.
+   io.write("\27[s\27[8m\27[6n")
+   if not (self.mx or self.my) then
+    io.write("\27[9999;9999H\27[6n\27[u")
+   end
+   local pos, buffer, hIndex, sx, sy = 1, "", 0
+   self.history = self.history or {}
+   local function redraw()
+    -- scroll until the buffer will fit on the screen
+    while sx and sy and self.mx and self.my and #buffer > (self.mx * ((self.my - sy) + 1)) - sx do
+     sy = sy - 1
+     io.write("\27[9999;9999H ")
+     io.write(string.format("\27[2K\27[%i;%iH\27[s", sx, sy))
+    end
+    io.write(string.format("\27[u%s \27[u\27[%iC",buffer,(#buffer-pos)+1))
+   end
+   while true do
+    char = readBytesOrChars(1)
+    if char == "\27" then
+     if readBytesOrChars(1) == "[" then
+      local args = {""}
+      repeat
+       char = readBytesOrChars(1)
+       if char:match("%d") then
+        args[#args] = args[#args]..char
+       else
+        args[#args] = tonumber(args[#args])
+        args[#args+1] = ""
+       end
+      until not char:match("[%d;]")
+      if char == "C" then -- right
+       if pos > 1 then
+        pos = pos - 1
+       end
+      elseif char == "D" then -- left
+       if pos <= #buffer then
+        pos = pos + 1
+       end
+      elseif char == "A" then -- up
+       hIndex = hIndex + 1
+       io.write("\27[u"..(" "):rep(buffer:len()+1))
+       buffer = self.history[1+#self.history-hIndex] or buffer
+       pos = 1
+      elseif char == "B" then -- down
+       hIndex = hIndex - 1
+       io.write("\27[u"..(" "):rep(buffer:len()+1))
+       if hIndex == 0 then
+        hIndex = hIndex - 1
+        buffer = ""
+       end
+       buffer = self.history[1+#self.history-hIndex] or buffer
+       pos = 1
+      elseif char == "R" then -- cursor position report
+       self.mx, self.my = sx and math.max(self.mx or 0, args[1]) or self.mx, sy and math.max(self.my or 0, args[2]) or self.my
+       sx, sy = sx or args[1], sy or args[2]
+      end
+      hIndex = math.max(math.min(hIndex,#self.history),0)
+     end
+    elseif char == "\8" then -- backspace
+     if #buffer > 0 and pos <= #buffer then
+      buffer = buffer:sub(1, (#buffer - pos)) .. buffer:sub((#buffer - pos) + 2)
+     end
+    elseif char == "\3" then -- ^C, error
+     error("terminated")
+    elseif char == "\1" then -- ^A, go to start of line
+     pos = buffer:len()+1
+    elseif char == "\5" then -- ^E, go to end of line
+     pos = 1
+    elseif char == "\2" then -- ^B, back one word
+     local nc = buffer:reverse():find(" ",pos+1)
+     pos = nc or #buffer+1
+    elseif char == "\6" then -- ^F, forward one word
+     local nc = buffer:find(" ",math.max(#buffer-pos+3,0))
+     pos = (nc and #buffer-nc+2) or 1
+    elseif char == "\13" or char == "\10" or char == "\n" then -- return / newline
+     io.write("\n")
+     self.history[#self.history+1] = buffer ~= "" and buffer ~= self.history[#self.history] and buffer or nil
+     if #self.history > (self.maxhistory or 16) then table.remove(self.history,1) end
+     if chop then buffer = buffer .. "\n" end
+     return buffer
+    else
+     buffer = buffer:sub(1, (#buffer - pos) + 1) .. char .. buffer:sub((#buffer - pos) + 2)
+    end
+    redraw()
+   end
   end
  end
 

module/component-get.lua

@@ -0,0 +1,8 @@
+function component.get(addr, ctype)
+  for c in component.list(ctype, true) do
+    if c:sub(1, addr:len()) == addr then
+      return c
+    end
+  end
+  return nil, "no such component"
+end

module/devfs.lua

@@ -64,7 +64,7 @@ end
 devfs.component.address = "devfs"
 devfs.component.type = "devfs"
 
-function devfs.register(fname,fopen) -- Register a new devfs node with the name *fname* that will run the function *fopen* when opened. This function should return a function for read, a function for write, function for close, and optionally, a function for seek, in that order.
+function devfs.register(fname,fopen) -- string function -- -- Register a new devfs node with the name *fname* that will run the function *fopen* when opened. This function should return a function for read, a function for write, function for close, and optionally, a function for seek, in that order.
  devfs.files[fname] = fopen
 end
 

module/fs.lua

@@ -3,14 +3,14 @@ fs = {}
 local fsmounts = {}
 
 -- basics
-function fs.segments(path) -- splits *path* on each /
+function fs.segments(path) -- string -- table -- Splits *path* on each /
  local segments = {}
  for segment in path:gmatch("[^/]+") do
   segments[#segments+1] = segment
  end
  return segments
 end
-function fs.resolve(path) -- resolves *path* to a specific filesystem mount and path
+function fs.resolve(path) -- string -- string string -- Resolves *path* to a specific filesystem mount and path
  if not path or path == "." then path = os.getenv("PWD") end
  if path:sub(1,1) ~= "/" then path=(os.getenv("PWD") or "").."/"..path end
  local segments, rpath, rfs= fs.segments(path)
@@ -44,7 +44,7 @@ local function fclose(self)
  return fsmounts[self.fs].close(self.fid)
 end
 
-function fs.open(path,mode) -- opens file *path* with mode *mode*
+function fs.open(path,mode) -- string string -- table -- Opens file *path* with mode *mode*, returning a file object.
  mode = mode or "rb"
  local fsi,path = fs.resolve(path)
  if not fsmounts[fsi] then return false end
@@ -54,7 +54,7 @@ function fs.open(path,mode) -- opens file *path* with mode *mode*
   if mode:find("r") then
    fobj.read = fread
   end
-  if mode:find("w") then
+  if mode:find("w") or mode:find("a") then
    fobj.write = fwrite
   end
   return fobj
@@ -62,61 +62,67 @@ function fs.open(path,mode) -- opens file *path* with mode *mode*
  return false
 end
 
-function fs.copy(from,to) -- copies a file from *from* to *to*
+function fs.copy(from,to) -- string string -- boolean -- copies a file from *from* to *to*
  local of = fs.open(from,"rb")
  local df = fs.open(to,"wb")
  if not of or not df then
   return false
  end
- df:write(of:read("*a"))
+ local tmp
+ repeat
+  tmp = of:read(2048)
+  df:write(tmp or "")
+ until not tmp
  df:close()
  of:close()
+ return true
 end
 
-function fs.rename(from,to) -- moves file *from* to *to*
+function fs.rename(from,to) -- string string -- boolean -- Moves file *from* to *to*
  local ofsi, opath = fs.resolve(from)
  local dfsi, dpath = fs.resolve(to)
  if ofsi == dfsi then
   fsmounts[ofsi].rename(opath,dpath)
   return true
  end
- fs.copy(from,to)
+ if not fs.copy(from,to) then return false end
- fs.remove(from)
+ if not fs.remove(from) then return false end
  return true
 end
 
-function fs.mount(path,proxy) -- mounts the filesystem *proxy* to the mount point *path* if it is a directory. BYO proxy.
+function fs.mount(path,proxy) -- string table -- boolean -- Mounts the filesystem *proxy* to the mount point *path* if it is a directory. BYO proxy.
  if fs.isDirectory(path) and not fsmounts[table.concat(fs.segments(path),"/")] then
   fsmounts[table.concat(fs.segments(path),"/")] = proxy
   return true
  end
  return false, "path is not a directory"
 end
-function fs.umount(path)
+function fs.umount(path) -- string -- -- Unmounts filesystem from *path*.
  local fsi,_ = fs.resolve(path)
  fsmounts[fsi] = nil
 end
 
-function fs.mounts() -- returns a table containing the mount points of all mounted filesystems
+function fs.mounts() -- -- table -- Returns a table containing the mount points of all mounted filesystems
  local rt = {}
  for k,v in pairs(fsmounts) do
   rt[#rt+1] = k,v.address or "unknown"
  end
+ table.sort(rt)
  return rt
 end
 
-function fs.address(path) -- returns the address of the filesystem at a given path, if applicable; do not expect a sensical response
+function fs.address(path) -- string -- string -- Returns the address of the filesystem at a given path, if applicable; do not expect a sensical response
  local fsi,_ = fs.resolve(path)
  return fsmounts[fsi].address
 end
-function fs.type(path) -- returns the component type of the filesystem at a given path, if applicable
+function fs.type(path) -- string -- string -- Returns the component type of the filesystem at a given path, if applicable
  local fsi,_ = fs.resolve(path)
- return fsmounts[fsi].type or "filesystem"
+ return fsmounts[fsi].fstype or fsmounts[fsi].type or "filesystem"
 end
 
 fsmounts["/"] = component.proxy(computer.tmpAddress())
 fs.makeDirectory("temp")
-if computer.getBootAddress then
+if computer.getBootAddress and component.type(computer.getBootAddress()) == "filesystem" then
  fs.makeDirectory("boot")
  fs.mount("boot",component.proxy(computer.getBootAddress()))
 end

module/init.lua

@@ -1,12 +1,4 @@
---#include "module/syslog.lua"
+_OSVERSION=_OSVERSION or "PsychOS 2"
---#include "module/sched.lua"
---#include "module/buffer.lua"
---#include "module/osutil.lua"
---#include "module/fs.lua"
---#include "module/io.lua"
---#include "module/devfs.lua"
---#include "module/devfs/syslog.lua"
---#include "module/loadfile.lua"
 
 os.spawn(function()
  os.setenv("PWD","/boot")
@@ -20,6 +12,9 @@ os.spawn(function()
  end
  os.setenv("HOSTNAME",hostname)
  syslog(string.format("Hostname set to %s",hostname))
+ if fs.exists("/boot/pkg") then
+  pcall(require,"pkgfs")
+ end
  local pids = {}
  local rc = require "rc"
  for k,v in pairs(rc.cfg.enabled) do

module/io.lua

@@ -1,21 +1,21 @@
 io = {}
 
-function io.open(path,mode) -- Open file *path* in *mode*. Returns a buffer object.
+function io.open(path,mode) -- string string -- table -- Open file *path* in *mode*. Returns a buffer object.
  local f,e = fs.open(path, mode)
  if not f then return false, e end
  return buffer.new(mode,f)
 end
 
-function io.input(fd) -- Sets the default input stream to *fd* if provided, either as a buffer as a path. Returns the default input stream.
+function io.input(fd) -- table -- table -- Sets the default input stream to *fd* if provided, either as a buffer as a path. Returns the default input stream.
  if type(fd) == "string" then
-  fd=io.open(fd,"rb")
+  fd=io.open(fd,"rbt")
  end
  if fd then
   os.setenv("STDIN",fd)
  end
  return os.getenv("STDIN")
 end
-function io.output(fd) -- Sets the default output stream to *fd* if provided, either as a buffer as a path. Returns the default output stream.
+function io.output(fd) -- table -- table -- Sets the default output stream to *fd* if provided, either as a buffer as a path. Returns the default output stream.
  if type(fd) == "string" then
   fd=io.open(fd,"wb")
  end
@@ -32,8 +32,9 @@ function io.write(...) -- Writes its arguments to the default output stream.
  io.output():write(...)
 end
 
-function print(...) -- Writes each argument to the default output stream, separated by newlines.
+function print(...) -- Writes each argument to the default output stream, separated by space.
  for k,v in ipairs({...}) do
-  io.write(tostring(v).."\n")
+  io.write((k>1 and "\t" or "")..tostring(v))
  end
+ io.write("\n")
 end

module/loadfile.lua

@@ -1,26 +1,26 @@
-function loadfile(p) -- reads file *p* and returns a function if possible
+function loadfile(p) -- string -- function -- reads file *p* and returns a function if possible
  local f = io.open(p,"rb")
  local c = f:read("*a")
  f:close()
  return load(c,p,"t")
 end
-function runfile(p,...) -- runs file *p* with arbitrary arguments in the current thread
+function runfile(p,...) -- string -- -- runs file *p* with arbitrary arguments in the current thread
  return loadfile(p)(...)
 end
-function os.spawnfile(p,n,...) -- spawns a new process from file *p* with name *n*, with arguments following *n*.
+
- local tA = {...}
- return os.spawn(function() local res={pcall(loadfile(p), table.unpack(tA))} computer.pushSignal("process_finished", os.pid(), table.unpack(res)) dprint(table.concat(res)) end,n or p)
-end
 _G.package = {}
-package.loaded = {computer=computer,component=component,fs=fs,buffer=buffer}
+package.path="/boot/lib/?.lua;/pkg/lib/?.lua;/boot/lib/?/init.lua;/pkg/lib/?/init.lua;./?;./?.lua;./?/init.lua"
-function require(f,force) -- searches for a library with name *f* and returns what the library returns, if possible. if *force* is set, loads the library even if it is cached
+package.loaded = {buffer=buffer, component=component, computer=computer, coroutine=coroutine, fs=fs, math=math, os=os, package=package, string=string, table=table}
+package.alias = {filesystem="fs"}
+function require(f,force) -- string boolean -- table -- searches for a library with name *f* and returns what the library returns, if possible. if *force* is set, loads the library even if it is cached
+ f=package.alias[f] or f
  if not package.loaded[f] or force then
-  local lib = os.getenv("LIB") or "/boot/lib"
+  local ln = f:gsub("%.","/")
-  for d in lib:gmatch("[^\n]+") do
+  for d in package.path:gmatch("[^;]+") do
-   if fs.exists(d.."/"..f) then
+   local p = d:gsub("%?",ln)
-    package.loaded[f] = runfile(d.."/"..f)
+   if fs.exists(p) and not fs.isDirectory(p) then
-   elseif fs.exists(d.."/"..f..".lua") then
+    package.loaded[f] = runfile(p)
-    package.loaded[f] = runfile(d.."/"..f..".lua")
+    break
    end
   end
  end
@@ -29,6 +29,6 @@ function require(f,force) -- searches for a library with name *f* and returns wh
  end
  error("library not found: "..f)
 end
-function reload(f)
+function reload(f) -- string -- table -- Reloads library *f* from disk into memory.
  return require(f,true)
 end

module/nvt100.lua

@@ -1,141 +0,0 @@
-function vt100emu(gpu) -- takes GPU component proxy *gpu* and returns a function to write to it in a manner like an ANSI terminal
- local colours = {0x0,0xFF0000,0x00FF00,0xFFFF00,0x0000FF,0xFF00FF,0x00B6FF,0xFFFFFF}
- local mx, my = gpu.maxResolution()
- local cx, cy = 1, 1
- local pc = " "
- local lc = ""
- local mode = 0 -- 0 normal, 1 escape, 2 command
- local lw = true
- local sx, sy = 1,1
- local cs = ""
- local bg, fg = 0, 0xFFFFFF
-
- -- setup
- gpu.setResolution(mx,my)
- gpu.fill(1,1,mx,my," ")
- local function checkCursor()
-  if cx > mx and lw then
-   cx, cy = 1, cy+1
-  end
-  if cy > my then
-   gpu.copy(1,2,mx,my-1,0,-1)
-   gpu.fill(1,my,mx,1," ")
-   cy=my
-  end
-  if cy < 1 then cy = 1 end
-  if cx < 1 then cx = 1 end
- end
-
- local function termwrite(s)
-  local wb = ""
-  local lb, ec = nil, nil
-  local function flushwb()
-   while wb:len() > 0 do
-    checkCursor()
-    local wl = wb:sub(1,mx-cx+1)
-    wb = wb:sub(wl:len()+1)
-    gpu.set(cx, cy, wl)
-    cx = cx + wl:len()
-   end
-  end
-  local rs = ""
-  s=s:gsub("\8","\27[D")
-  pc = gpu.get(cx,cy)
-  gpu.setForeground(fg)
-  gpu.setBackground(bg)
-  gpu.set(cx,cy,pc)
-  for cc in s:gmatch(".") do
-   if mode == 0 then
-    if cc == "\n" then
-     flushwb()
-     cx,cy = 1, cy+1
-    elseif cc == "\t" then
-     wb=wb..(" "):rep(8*((cx+9)//8))
-    elseif cc == "\27" then
-     flushwb()
-     mode = 1
-    else
-     wb = wb .. cc
-    end
-   elseif mode == 1 then
-    if cc == "[" then
-     mode = 2
-    else
-     mode = 0
-    end
-   elseif mode == 2 then
-    if cc:match("[%d;]") then
-     cs = cs .. cc
-    else
-     mode = 0
-     local tA = {}
-     for s in cs:gmatch("%d+") do
-      tA[#tA+1] = tonumber(s)
-     end
-     if cc == "H" then
-      cx, cy = tA[1] or 1, tA[2] or 1
-     elseif cc == "A" then
-      cy = cy - (tA[1] or 1)
-     elseif cc == "B" then
-      cy = cy + (tA[1] or 1)
-     elseif cc == "C" then
-      cx = cx + (tA[1] or 1)
-     elseif cc == "D" then
-      cx = cx - (tA[1] or 1)
-     elseif cc == "s" then
-      sx, sy = cx, cy
-     elseif cc == "u" then
-      cx, cy = sx, sy
-     elseif cc == "n" and tA[1] == 6 then
-      rs = string.format("%s\27[%d;%dR",rs,cx,cy)
-     elseif cc == "K" and tA[1] == 1 then
-      gpu.fill(1,cy,cx,1," ")
-     elseif cc == "K" and tA[1] == 2 then
-      gpu.fill(cx,cy,mx,1," ")
-     elseif cc == "K" then
-      gpu.fill(1,cy,mx,1," ")
-     elseif cc == "J" and tA[1] == 1 then
-      gpu.fill(1,1,mx,cy," ")
-     elseif cc == "J" and tA[1] == 2 then
-      gpu.fill(1,1,mx,my," ")
-      cx, cy = 1, 1
-     elseif cc == "J" then
-      gpu.fill(1,cy,mx,my," ")
-     elseif cc == "m" then
-      for _,num in ipairs(tA) do
-       if num == 0 then
-        fg,bg,ec,lb = 0xFFFFFF,0,true,true
-       elseif num == 7 then
-        local nfg,nbg = bg, fg
-        fg, bg = nfg, nbg
-       elseif num > 29 and num < 38 then
-        fg = colours[num-29]
-       elseif num > 39 and num < 48 then
-        bg = colours[num-39]
-       elseif num == 100 then -- disable local echo
-        ec = false
-       elseif num == 101 then -- disable line mode
-        lb = false
-       end
-      end
-      gpu.setForeground(fg)
-      gpu.setBackground(bg)
-     end
-     cs = ""
-     checkCursor()
-    end
-   end
-  end
-  flushwb()
-  checkCursor()
-  pc = gpu.get(cx,cy)
-  gpu.setForeground(bg)
-  gpu.setBackground(fg)
-  gpu.set(cx,cy,pc)
-  gpu.setForeground(fg)
-  gpu.setBackground(bg)
-  return rs, lb, ec
- end
-
- return termwrite
-end

module/osutil.lua

@@ -1,4 +1,4 @@
-function os.chdir(p) -- changes the current working directory of the calling process to the directory specified in *p*, returning true or false, error
+function os.chdir(p) -- string -- boolean string -- changes the current working directory of the calling process to the directory specified in *p*, returning true or false, error
  if not (p:sub(1,1) == "/") then
   local np = {}
   for k,v in pairs(fs.segments(os.getenv("PWD").."/"..p)) do

module/rtfsboot.lua

@@ -0,0 +1,20 @@
+--#includepkglib "diskpart" "lib/diskpart.lua" "diskpart"
+--#includepkglib "rtfs" "lib/fs/rtfs/init.lua" "fs.rtfs"
+--#includepkglib "rtfs" "lib/fs/rtfs/v1.lua" "fs.rtfs.v1"
+do
+ local a = computer.getBootAddress()
+ if component.type(a) == "drive" or component.type(a) == "tape_drive" then
+  local diskpart = require "diskpart"
+  for k,v in ipairs(diskpart.getPartitions(a)) do
+   if v[2] == "rtfs" and v[1] == computer.address():sub(1,8) .. "-boot" then
+    syslog("Partition with suitable name detected, attempting to mount...")
+    local rtfs = require "fs.rtfs"
+    fs.makeDirectory("boot")
+    local m = rtfs.mount(diskpart.proxyPartition(a,k))
+    m.address = string.format("%s/%i/rtfs",a,k)
+    fs.mount("boot",m)
+    break
+   end
+  end
+ end
+end

module/sched.lua

@@ -1,11 +1,20 @@
 do
-local tTasks,nPid,nTimeout,cPid = {},1,0.25,0 -- table of tasks, next process ID, event timeout, current PID
+local tTasks,nPid,nTimeout,cPid = {},1,0.25,0 -- table of tasks, next process ID, default event timeout, current PID
-function os.spawn(f,n) -- creates a process from function *f* with name *n*
+function os.spawn(f,n) -- function string -- number -- creates a process from function *f* with name *n*
  tTasks[nPid] = {
-  c=coroutine.create(f), -- actual coroutine
+  c=coroutine.create(function()
+   local rt = {pcall(f)}
+   if not rt[1] then
+    syslog(rt[2])
+   end
+   computer.pushSignal("process_finished",os.pid(),table.unpack(rt))
+  end), -- actual coroutine
   n=n, -- process name
   p=nPid, -- process PID
   P=cPid, -- parent PID
+  t=0, -- CPU time
+  T=0, -- total uptime
+  E=nTimeout, -- event timeout
   e={} -- environment variables
  }
  if tTasks[cPid] then
@@ -16,32 +25,37 @@ function os.spawn(f,n) -- creates a process from function *f* with name *n*
  nPid = nPid + 1
  return nPid - 1
 end
-function os.kill(pid) -- removes process *pid* from the task list
+function os.kill(pid) -- number -- -- removes process *pid* from the task list
  tTasks[pid] = nil
 end
-function os.pid() -- returns the current process' PID
+function os.pid() -- -- number -- returns the current process' PID
  return cPid
 end
-function os.tasks() -- returns a table of process IDs
+function os.tasks() -- -- table -- returns a table of process IDs
  local rt = {}
  for k,v in pairs(tTasks) do
   rt[#rt+1] = k
  end
  return rt
 end
-function os.taskInfo(pid) -- returns info on process *pid* as a table with name and parent values
+function os.taskInfo(pid) -- number -- table -- returns info on process *pid* as a table with name and parent values
  pid = pid or os.pid()
  if not tTasks[pid] then return false end
- return {name=tTasks[pid].n,parent=tTasks[pid].P}
+ return {name=tTasks[pid].n,parent=tTasks[pid].P,cputime=tTasks[pid].t,iotime=tTasks[pid].T,timeout=tTasks[pid].E}
 end
 function os.sched() -- the actual scheduler function
  os.sched = nil
+ local sTimeout = nTimeout
  while #tTasks > 0 do
-  local tEv = {computer.pullSignal(nTimeout)}
+  local tEv = {computer.pullSignal(sTimeout)}
+  sTimeout = nTimeout
   for k,v in pairs(tTasks) do
    if coroutine.status(v.c) ~= "dead" then
     cPid = k
+    local sT, sC = os.clock(), computer.uptime()
     coroutine.resume(v.c,table.unpack(tEv))
+    v.t, v.T = v.t + os.clock() - sT, v.T + computer.uptime() - sC
+    sTimeout=math.min(sTimeout, v.E)
    else
     tTasks[k] = nil
    end
@@ -58,11 +72,9 @@ function os.getenv(k) -- gets a process' *k* environment variable
   return tTasks[cPid].e[k]
  end
 end
-function os.setTimeout(n)
+function os.setTimeout(n,pid)
- if type(n) == "number" and n >= 0 then
+ assert(type(n) == "number" and n >= 0)
-  nTimeout = n
+ tTasks[pid or cPid].E = n
-  return true
+ return true
- end
- return false
 end
 end

module/syslog.lua

@@ -9,6 +9,7 @@ syslog.notice = 5
 syslog.info = 6
 syslog.debug = 7
 
+-- function syslog(msg, level, service) -- string number string -- -- Output *msg* to the system log, with severity *level*, from *service*.
 local rdprint=dprint or function() end
 setmetatable(syslog,{__call = function(_,msg, level, service)
  level, service = level or syslog.info, service or (os.taskInfo(os.pid()) or {}).name or "unknown"

module/term.lua

@@ -1,5 +0,0 @@
---#include "module/vt-task.lua"
-do
-local r,w = vtemu(component.list("gpu")(),component.list("screen")())
-devfs.register("tty0", function() return r,w,function() end end)
-end

module/vt-task.lua

@@ -1,58 +0,0 @@
-do
---#include "module/nvt100.lua"
-function vtemu(gpua,scra) -- creates a process to handle the GPU and screen address combination *gpua*/*scra*. Returns read, write and "close" functions.
- local gpu = component.proxy(gpua)
- gpu.bind(scra)
- local write = vt100emu(gpu)
- local kba = {}
- for k,v in ipairs(component.invoke(scra,"getKeyboards")) do
-  kba[v]=true
- end
- local buf, lbuf, echo = "", true, true
- os.spawn(function() dprint(pcall(function()
-  while true do
-   local ty,ka,ch = coroutine.yield()
-   if ty == "key_down" and kba[ka] then
-    if ch == 13 then ch = 10 end
-    if ch == 8 then
-     if buf:len() > 0 then
-      if echo then write("\8 \8") end
-      buf = buf:sub(1,-2)
-     end
-    elseif ch > 0 then
-     if echo then write(string.char(ch)) end
-     buf=buf..string.char(ch)
-    end
-   end
-  end
- end)) end,string.format("ttyd[%s:%s]",gpua:sub(1,8),scra:sub(1,8)))
- local function bread(n)
-  local r
-  if lbuf then
-   while not buf:find("\n") do
-    coroutine.yield()
-   end
-   local n = buf:find("\n")
-   r, buf = buf:sub(1,n), buf:sub(n+1)
-  else
-   r = buf
-   buf = ""
-   coroutine.yield()
-  end
-  return r
- end
- local function bwrite(d)
-  local ba, lb, ec = write(d)
-  buf = buf .. ba
-  if lb ~= nil then
-   dprint("local buffer mode: "..tostring(lb))
-   lbuf = lb
-  end
-  if ec ~= nil then
-   dprint("echo mode: "..tostring(ec))
-   echo = ec
-  end
- end
- return bread, bwrite, function() io.write("\27[2J\27[H") end
-end
-end

module/vt100.lua

@@ -1,148 +0,0 @@
-function vt100emu(gpu) -- takes GPU component proxy *gpu* and returns a function to write to it in a manner like an ANSI terminal
- local colours = {0x0,0xFF0000,0x00FF00,0xFFFF00,0x0000FF,0xFF00FF,0x00B6FF,0xFFFFFF}
- local mx, my = gpu.maxResolution()
- local cx, cy = 1, 1
- local pc = " "
- local lc = ""
- local mode = "n"
- local lw = true
- local sx, sy = 1,1
- local cs = ""
- local bg, fg = 0, 0xFFFFFF
-
- -- setup
- gpu.setResolution(mx,my)
- gpu.fill(1,1,mx,my," ")
-
- local function termwrite(s)
-  local rs = ""
-  s=s:gsub("\8","\27[D")
-  pc = gpu.get(cx,cy)
-  gpu.setForeground(fg)
-  gpu.setBackground(bg)
-  gpu.set(cx,cy,pc)
-  for i = 1, s:len() do
-   local cc = s:sub(i,i)
-
-   if mode == "n" then
-    if cc == "\n" then -- line feed
-     cx, cy = 1, cy+1
-    elseif cc == "\r" then -- cursor home
-     cx = 1
-    elseif cc == "\27" then -- escape
-     mode = "e"
-    elseif cc == "\t" then
-     cx = 8*((cx+9)//8)
-    elseif string.byte(cc) > 31 and string.byte(cc) < 127 then -- printable, I guess
-     gpu.set(cx, cy, cc)
-     cx = cx + 1
-    end
-
-   elseif mode == "e" then
-    if cc == "[" then
-     mode = "v"
-     cs = ""
-    elseif cc == "D" then -- scroll down
-     gpu.copy(1,2,mx,my-1,0,-1)
-     gpu.fill(1,my,mx,1," ")
-     cy=cy+1
-     mode = "n"
-    elseif cc == "M" then -- scroll up
-     gpu.copy(1,1,mx,my-1,0,1)
-     gpu.fill(1,1,mx,1," ")
-     mode = "n"
-    else
-     mode = "n"
-    end
-
-   elseif mode == "v" then
-    mode = "n"
-    if cc == "s" then -- save cursor
-     sx, sy = cx, cy
-    elseif cc == "u" then -- restore cursor
-     cx, cy = sx, sy
-    elseif cc == "H" then -- cursor home or to
-     local tx, ty = cs:match("(%d+);(%d+)")
-     tx, ty = tx or "1", ty or "1"
-     cx, cy = tonumber(tx), tonumber(ty)
-    elseif cc == "A" then -- cursor up
-     cy = cy - (tonumber(cs) or 1)
-    elseif cc == "B" then -- cursor down
-     cy = cy + (tonumber(cs) or 1)
-    elseif cc == "C" then -- cursor right
-     cx = cx + (tonumber(cs) or 1)
-    elseif cc == "D" then -- cursor left
-     cx = cx - (tonumber(cs) or 1)
-    elseif cc == "h" and lc == "7" then -- enable line wrap
-     lw = true
-    elseif cc == "l" and lc == "7" then -- disable line wrap
-     lw = false
-    elseif cc == "c" then
-     rs = string.format("%s\27[%d;%d0c",rs,mx,my)
-    elseif cc == "n" and lc == "6" then
-     rs = string.format("%s\27[%d;%dR",rs,cx,cy)
-    elseif cc == "K" then
-     if lc == "1" then
-      gpu.fill(1,cy,cx,1," ")
-     elseif lc == "2" then
-      gpu.fill(cx,cy,mx,1," ")
-     else
-      gpu.fill(1,cy,mx,1," ")
-     end
-    elseif cc == "J" then
-     if lc == "1" then
-      gpu.fill(1,1,mx,cy," ")
-     elseif lc == "2" then
-      gpu.full(1,1,mx,my," ")
-      cx,cy = 1, 1
-     else
-      gpu.fill(1,cy,mx,my," ")
-     end
-    elseif cc == "m" then
-     for num in cs:gmatch("%d+") do
-      num=tonumber(num)
-      if num == 0 then
-       fg,bg = 0xFFFFFF,0
-      elseif num == 7 then
-       local nfg,nbg = bg, fg
-       fg, bg = nfg, nbg
-      elseif num > 29 and num < 38 then
-       fg = colours[num-29]
-      elseif num > 39 and num < 48 then
-       bg = colours[num-39]
-      end
-     end
-     gpu.setForeground(fg)
-     gpu.setBackground(bg)
-    else
-     cs = cs .. cc
-     if cc:match("[%d;]") then
-      mode = "v"
-     end
-    end
-   end
-
-   if cx > mx and lw then
-    cx, cy = 1, cy+1
-   end
-   if cy > my then
-    gpu.copy(1,2,mx,my-1,0,-1)
-    gpu.fill(1,my,mx,1," ")
-    cy=my
-   end
-   if cy < 1 then cy = 1 end
-   if cx < 1 then cx = 1 end
-
-   lc = cc
-  end
-  pc = gpu.get(cx,cy)
-  gpu.setForeground(bg)
-  gpu.setBackground(fg)
-  gpu.set(cx,cy,pc)
-  gpu.setForeground(fg)
-  gpu.setBackground(bg)
-  return rs
- end
-
- return termwrite
-end

obootstrap.lua

@@ -0,0 +1,31 @@
+local fs = require "filesystem"
+
+local wdir = "/tmp/psbootstrap"
+local dlfiles = {
+ ["/lib/libmtar.lua"] = "https://git.shadowkat.net/izaya/OC-misc/raw/branch/master/mtar/libmtar.lua",
+ ["/lib/fs/rtfs/init.lua"] = "https://git.shadowkat.net/izaya/PsychOSPackages/raw/branch/master/rtfs/lib/fs/rtfs/init.lua", 
+ ["/lib/fs/rtfs/v1.lua"] = "https://git.shadowkat.net/izaya/PsychOSPackages/raw/branch/master/rtfs/lib/fs/rtfs/v1.lua", 
+ ["/lib/diskpart.lua"] = "https://git.shadowkat.net/izaya/PsychOSPackages/raw/branch/master/diskpart/lib/diskpart.lua", 
+ ["/etc/rc.d/partman.lua"] = "https://git.shadowkat.net/izaya/OC-misc/raw/branch/master/partition/OpenOS/etc/rc.d/partman.lua", 
+ ["/bin/slicer.lua"] = "https://git.shadowkat.net/izaya/PsychOSPackages/raw/branch/master/slicer/exec/slicer.lua",
+ ["/bin/boopu.lua"] = "https://git.shadowkat.net/izaya/PsychOSPackages/raw/branch/master/boopu/exec/boopu.lua",
+}
+
+local function run(cmd)
+ print(cmd)
+ os.execute(cmd)
+end
+
+print("Downloading and linking files...")
+for k,v in pairs(dlfiles) do
+ local tpath = string.format("%s/%s", wdir, k)
+ local isdir = fs.isDirectory(fs.path(tpath)) or fs.makeDirectory(fs.path(tpath))
+ run(string.format("wget '%s' '%s'", v, tpath))
+ local lt = k
+ while not fs.isDirectory(fs.path(lt)) and not fs.isLink(fs.path(lt)) do
+  lt = fs.path(lt)
+ end
+ if fs.get(tpath) ~= fs.get(lt) then
+  run(string.format("ln '%s/%s' '%s'", wdir, lt, lt))
+ end
+end

preproc.lua

@@ -0,0 +1,121 @@
+local preproc = {}
+preproc.directives = {}
+
+function preproc.parsewords(line) -- string -- table -- Returns a table of words from the string *line*, parsing quotes and escapes.
+ local rt = {""}
+ local escaped, quoted = false, false
+ for c in line:gmatch(".") do
+  if escaped then
+   rt[#rt] = rt[#rt]..c
+  elseif c == '"' or c == "'" then
+   quoted = not quoted
+  elseif c == "\\" then
+   escaped = true
+  elseif c:match("%s") and not quoted and rt[#rt]:len() > 0 then
+   rt[#rt+1] = ""
+  else
+   rt[#rt] = rt[#rt]..c
+  end
+ end
+ return rt
+end
+
+function preproc.line(line) -- string -- -- Returns either a function - which can be called to get lines until it returns nil - or a string from processing *line* using preprocessor directives.
+ if line:match("^%-%-#") then
+  local directive, args = line:match("^%-%-#(%S+)%s(.+)")
+  print(directive,args)
+  local args = preproc.parsewords(args)
+  if preproc.directives[directive] then
+   return preproc.directives[directive](table.unpack(args))
+  else
+   error("unknown preprocessor directive: "..directive)
+  end
+ else
+  return line
+ end
+end
+
+function preproc.preproc(...) -- string -- string -- Returns the output from preprocessing the files listed in *...*.
+ local tA = {...}
+ local output = ""
+ for _,fname in ipairs(tA) do
+  local f,e = io.open(fname)
+  if not f then error("unable to open file "..fname..": "..e) end
+  for line in f:lines() do
+   local r = preproc.line(line)
+   if type(r) == "function" then
+    while true do
+     local rs = r()
+     if not rs then break end
+     output = output .. rs .. "\n"
+    end
+   else
+    output = output .. r .. "\n"
+   end
+  end
+ end
+ return output
+end
+
+preproc.directives.include = preproc.preproc
+
+function preproc.directives.includelib(file, name) -- string string -- string -- Returns a preprocessed inlined library
+ return string.format("package.loaded['%s'] = (function()\n%s\nend)()", name, preproc.preproc(file))
+end
+
+function preproc.directives.includepkgfile(package, file)
+ if (_OSVERSION or ""):sub(1,7) == "PsychOS" then
+  return preproc.preproc(string.format("/pkg/%s", file))
+ else
+  for path in (os.getenv("PSYCHOSPACKAGES") or "../PsychOSPackages"):gmatch("[^:]+") do
+   local f = io.open(string.format("%s/%s/%s", path, package, file), "r")
+   if f then
+    f:close()
+    return preproc.preproc(string.format("%s/%s/%s", path, package, file))
+   end
+  end
+ end
+ error(string.format("unable to locate file %s from package %s", file, package))
+end
+
+function preproc.directives.includepkglib(package, file, name) -- string string -- string -- Returns a preprocessed inlined library
+ return string.format("package.loaded['%s'] = (function()\n%s\nend)()", name, preproc.directives.includepkgfile(package, file))
+end
+
+local minify = true
+local minifyFilters = {
+ {"%-%-%[%[.-%]%]",""},
+ {"%-%-.-\n","\n"},
+ {"\n[ \t]+","\n"},
+ {"%s?%.%.%s?",".."},
+ {"%s?==%s?","=="},
+ {"%s?~=%s?","~="},
+ {"%s?>=%s?",">="},
+ {"%s?<=%s?","<="},
+ {"%s?>%s?",">"},
+ {"%s?<%s?","<"},
+ {"%s?=%s?","="},
+ {"%s?,%s?",","},
+ {",\n",","},
+ {"\n\n+","\n"},
+ {"[ \t]\n","\n"},
+ {"%{%s+","{"},
+ {"%s+%}","}"}
+}
+
+return setmetatable(preproc,{__call=function(_,...)
+ local tA = {...}
+ local out = table.remove(tA,#tA)
+ local f,e = io.open(out,"wb")
+ if not f then error("unable to open file "..out..": "..e) end
+ local out = preproc.preproc(table.unpack(tA))
+ if preproc.minify then
+  local olen = #out
+  for k,v in ipairs(minifyFilters) do
+   out = out:gsub(v[1],v[2])
+  end
+  print(olen, #out)
+ end
+ f:write(out)
+ f:close()
+end})

service/clipboard.lua

@@ -1,11 +1,17 @@
-local lc = computer.uptime()
 _G.clip = ""
-while true do
+
- local eT = {coroutine.yield()}
+function start()
- if eT[1] == "clipboard" then
+ return os.spawn(function()
-  if computer.uptime() > lc + 5 then
+   local lc
-   _G.clip = ""
+   while true do
-  end
+    local eT = {coroutine.yield()}
-  _G.clip = _G.clip .. eT[3]
+    if eT[1] == "clipboard" then
- end
+     if computer.uptime() > lc + 5 then
+      _G.clip = ""
+     end
+     lc = computer.uptime()
+     _G.clip = _G.clip .. eT[3]
+    end
+   end
+ end)
 end

service/fserv.lua

@@ -1,95 +0,0 @@
-local minitel = require "minitel"
-local serial = require "serialization"
-
-local cfg = {["path"]="/boot/srv/frequest",["port"]=70}
-
-f=io.open("/boot/cfg/fserv.cfg","rb")
-if f then
- local ncfg = serial.unserialize(f:read("*a"))
- f:close()
- for k,v in pairs(ncfg) do
- cfg[k] = v
- end
-end
-
-local function fileHandler(socket,rtype,path)
- syslog(string.format("[%s:%d] %s %s",socket.addr,socket.port,rtype,path),syslog.info,"fserv")
- if rtype == "t" then
-  if fs.exists(path) and fs.isDirectory(path) then
-   socket:write("d")
-   for _,file in ipairs(fs.list(path)) do
-    socket:write(file.."\n")
-   end
-  elseif fs.exists(path) and not fs.isDirectory(path) then
-   local f,err = io.open(path,"rb")
-   if f then
-    socket:write("y")
-    while true do
-     local c = f:read(4096)
-     if not c or c == "" then break end
-     socket:write(c)
-    end
-   else
-    socket:write("fFailed to open file: "..err)
-   end
-  else
-   socket:write("nFile not found")
-  end
- elseif rtype == "s" then
-  if fs.exists(path) then
-   local ftype = "f"
-   if fs.isDirectory(path) then
-    ftype = "d"
-   end
-   socket:write(string.format("y%s\n%d",ftype,fs.size(path)))
-  else
-   socket:write("nFile not found.")
-  end
- else
-  socket:write("fUnknown request type")
- end
-end
-local function httpHandler(socket,rtype,path)
- local tPath = fs.segments(path)
- local proto = table.remove(tPath,1)
- local url = string.format("%s://%s",proto,table.concat(tPath,"/"))
- local request = component.invoke(component.list("internet")(),"request",url)
- repeat
-  coroutine.yield()
- until request.finishConnect()
- local code, message, headers = request.response()
- if code < 200 or code > 299 then
-  socket:write(string.format("f%d\n%s",code,message))
- else
-  local data = ""
-  repeat
-   coroutine.yield()
-   data = request.read()
-   if data then
-    socket:write(data)
-   end
-  until not data
- end
-end
-
-local function socketHandler(socket)
- return function() 
-  local line = nil
-  repeat
-   coroutine.yield()
-   line = socket:read()
-  until line
-  local rtype, path = line:match("(.)(.+)")
-  if fs.segments(path)[1] == "http" or fs.segments(path)[1] == "https" then
-   httpHandler(socket,rtype,path)
-  else
-   path = (cfg.path .. "/" .. path:gsub("../","")):gsub("/+","/")
-   fileHandler(socket,rtype,path)
-  end
-  socket:close()
- end
-end
-
-while true do
- os.spawn(socketHandler(minitel.listen(70)),"fserv worker process")
-end

service/fsmanager.lua

@@ -1,26 +1,44 @@
-local function mount(addr)
+local fsmanager = {}
- dest = component.invoke(addr,"getLabel") or "mnt/"..addr:sub(1,3)
+fsmanager.filesystems = {}
- dest = "/"..dest
+local run = true
+
+function fsmanager.mount(addr)
+ for k,v in ipairs(fs.mounts()) do
+  if fs.address(v) == addr then
+   return
+  end
+ end
+ dest = "/" .. (component.invoke(addr,"getLabel") or "mnt/"..addr:sub(1,3))
  syslog("Mounting "..addr.." to "..dest)
  fs.makeDirectory(dest)
  local w,r = fs.mount(dest,component.proxy(addr))
  if not w then 
   syslog("Failed to mount: "..r)
+  return false
  end
-end
+ fsmanager.filesystems[addr] = dest
-for addr, _ in component.list("filesystem") do
- mount(addr)
 end
 
-function start()
+function fsmanager.start()
+ run = true
  return os.spawn(function()
-  while true do
+  for addr, _ in component.list("filesystem") do
+   fsmanager.mount(addr)
+  end
+  while run do
    local tE = {coroutine.yield()}
    if tE[1] == "component_added" and tE[3] == "filesystem" then
-    mount(tE[2])
+    fsmanager.mount(tE[2])
-   elseif tE[1] == "component_removed" and tE[3] == "filesystem" then
+   elseif tE[1] == "component_removed" and fsmanager.filesystems[tE[2]] and tE[3] == "filesystem" then
-    fs.umount("/mnt/"..tE[2]:sub(1,3))
+    syslog("Unmounting "..tE[2].." from "..fsmanager.filesystems[tE[2]])
+    fs.umount(fsmanager.filesystems[tE[2]])
+    fsmanager.filesystems[tE[2]] = nil
    end
   end
  end,"fsmanager")
 end
+function fsmanager.stop()
+ run = false
+end
+
+return fsmanager

service/getty.lua

@@ -37,20 +37,31 @@ local function spawnShell(fin,fout)
  io.input(fin)
  io.output(fout):setvbuf("no")
  print(_OSVERSION.." - "..tostring(math.floor(computer.totalMemory()/1024)).."K RAM")
+ print((os.getenv("HOSTNAME") or "unknown") .. " on " .. fin)
  return os.spawn(shell.interactive, "shell: "..tostring(fin))
 end
 
 local function allocate()
  for k,v in pairs(gpus) do
-  dprint(k)
+  dprint("Setting up display "..k)
   local sA = nextScreen(v[2])
   if v[1] == false and sA then
-   local r,w = vtansi.vtsession(k,sA)
+   local terminals = 1
-   devfs.register("tty"..tostring(ttyn), function() return r,w,function() end end)
+   local gpu = component.proxy(k)
+   gpu.bind(sA)
+   if gpu.buffers then
+    gpu.freeAllBuffers()
+    local mw, mh = gpu.maxResolution()
+    terminals = math.floor(gpu.freeMemory() / (mw * mh))
+   end
+   for i = 1, terminals do
+    local r,w = vtansi.vtsession(k,sA)
+    devfs.register("tty"..tostring(ttyn), function() return r,w,function() end end)
+    pids["tty"..tostring(ttyn)] = {-1}
+    ttyn = ttyn + 1
+   end
    gpus[k][1] = true
    screens[sA][1] = true
-   pids["tty"..tostring(ttyn)] = {-1}
-   ttyn = ttyn + 1
   end
  end
 end
@@ -59,14 +70,15 @@ function start()
 basepid = os.spawn(function()
 scan()
 allocate()
-dprint("screens ready")
+dprint("Display setup complete.")
 while true do
  coroutine.yield()
  for k,v in pairs(pids) do
   if not os.taskInfo(v[1]) then
    dprint("Spawning new shell for "..k)
    pids[k][1] = spawnShell(v[2] or "/dev/"..k, v[3] or "/dev/"..k)
-   pids[k][2], pids[k][3] = pids[k][2] or io.input(), pids[k][3] or io.output()
+   pids[k][2], pids[k][3] = pids[k][2] or "/dev/"..k, pids[k][3] or "/dev/"..k
+   coroutine.yield()
   end
  end
 end
@@ -77,3 +89,4 @@ function stop()
  os.kill(basepid)
  basepid = nil
 end
+return {start=start,stop=stop}

service/minitel.lua

@@ -271,3 +271,4 @@ function del_route(to)
  cfg.sroutes[to] = nil
  saveconfig()
 end
+return {start=start,stop=stop,set=set,set_route=set_route,del_route=del_route}

service/vtunnel.lua

@@ -1,162 +0,0 @@
-local vcomponent = require "vcomponent"
-local serial = require "serialization"
-local component = require "component"
-local computer = require "computer"
-local event = require "event"
-local imt = require "interminitel"
-
-local cfg = {}
-cfg.peers = {}
-cfg.rtimer = 5
-cfg.katimer = 30
-local listeners = {}
-local proxies = {}
-
-local function loadcfg()
- local f = io.open("/boot/cfg/vtunnel.cfg","rb")
- if not f then return false end
- for k,v in pairs(serial.unserialize(f:read("*a")) or {}) do
-  cfg[k] = v
- end
- f:close()
-end
-local function savecfg()
- local f = io.open("/boot/cfg/vtunnel.cfg","wb")
- if not f then 
-  print("Warning: unable to save configuration.")
-  return false
- end
- f:write(serial.serialize(cfg))
- f:close()
-end
-
-local function createTunnel(host,port,addr,raddr)
- local proxy = {address=addr,buffer=""}
- function proxy.connect()
-  if proxy.socket then
-   proxy.socket.close()
-  end
-  proxy.socket = component.invoke(component.list("internet")(),"connect",host,port)
-  local st = computer.uptime()
-  repeat
-   coroutine.yield()
-  until proxy.socket.finishConnect() or computer.uptime() > st+5
- end
- function proxy.send(...)
-  rt = 0
-  while not proxy.socket.write(imt.encodePacket(...)) and rt < 10 do
-   proxy.connect()
-   rt = rt + 1
-  end
-  proxy.last = computer.uptime()
- end
- function proxy.read()
-  local rb, r
-  local rt = 0
-  while true do
-   rb,r = proxy.socket.read(4096)
-   if rb or rt > 10 then break end
-   if type(rb) == "nil" then
-    proxy.connect()
-   end
-   rt = rt + 1
-  end
-  proxy.buffer = proxy.buffer .. rb
-  while imt.decodePacket(proxy.buffer) do
-   computer.pushSignal("modem_message",addr,raddr,0,0,imt.decodePacket(proxy.buffer))
-   proxy.buffer = imt.getRemainder(proxy.buffer) or ""
-  end
-  if computer.uptime() > proxy.last + cfg.katimer then
-   proxy.socket.write("\0\1\0")
-   proxy.last = computer.uptime()
-  end
- end
- function proxy.getWakeMessage()
-  return false
- end
- proxy.setWakeMessage = proxy.getWakeMessage
- function proxy.maxPacketSize()
-  return 8192
- end
- function proxy.getChannel()
-  return host..":"..tostring(port)
- end
- proxy.connect()
- proxy.last = computer.uptime()
- return proxy
-end
-
-vt = {}
-function start()
- loadcfg()
- for k,v in pairs(cfg.peers) do
-  print(string.format("Connecting to %s:%d",v.host,v.port))
-  v.addr = v.addr or vcomponent.uuid()
-  v.raddr = v.raddr or vcomponent.uuid()
-  local px = createTunnel(v.host, v.port, v.addr, v.raddr)
-  vcomponent.register(v.addr, "tunnel", px)
-  proxies[v.addr] = px
- end
- for k,v in pairs(os.tasks()) do
-  if os.taskInfo(v).name:match("minitel") then
-   os.kill(v)
-  end
- end
-end
-function vt.stop()
- for k,v in pairs(proxies) do
-  vcomponent.unregister(k)
- end
-end
-
-function vt.listpeers()
- for k,v in pairs(cfg.peers) do
-  print(string.format("#%d (%s:%d)\n Local address: %s\n Remote address: %s",k,v.host,v.port,v.addr,v.raddr))
- end
-end
-function vt.addpeer(host,port)
- port = tonumber(port) or 4096
- local t = {}
- t.host = host
- t.port = port
- t.addr = vcomponent.uuid()
- t.raddr = vcomponent.uuid()
- cfg.peers[#cfg.peers+1] = t
- print(string.format("Added peer #%d (%s:%d) to the configuration.\nRestart to apply changes.",#cfg.peers,host,port))
- savecfg()
-end
-function vt.delpeer(n)
- n=tonumber(n)
- if not n then
-  print("delpeer requires a number, representing the peer number, as an argument.")
-  return false
- end
- local dp = table.remove(cfg.peers, n)
- savecfg()
- print(string.format("Removed peer %s:%d",dp.host, dp.port))
-end
-
-function vt.settimer(time)
- time = tonumber(time)
- if not time then
-  print("Timer must be a number.")
-  return false
- end
- cfg.rtime = time
- savecfg()
-end
-
-vt.start = start
-_G.libs.vtunnel = vt
-
-start()
-local last = computer.uptime()
-while true do
- local tE = {coroutine.yield()}
- if computer.uptime() > last + cfg.rtimer then
-  for k,v in pairs(proxies) do
-   v.read()
-  end
-  last = computer.uptime()
- end
-end

template.tex

@@ -0,0 +1,46 @@
+\documentclass[11pt,twoside,a4paper]{article}
+\usepackage{hyperref}
+\usepackage{multicol}
+\usepackage{standalone}
+\usepackage{graphicx}
+\usepackage{pdfpages}
+\usepackage{listings}
+\usepackage{color}
+\usepackage{sectsty}
+\usepackage[cm]{fullpage}
+\lstset{
+ commentstyle=\color{cyan},    % comment style
+ keywordstyle=\color{cyan},       % keyword style
+ stringstyle=\color{red},     % string literal style
+ numbers=left,                    % where to put the line-numbers; possible values are (none, left, right)
+ numbersep=5pt,                   % how far the line-numbers are from the code
+ numberstyle=\tiny\color{gray}, % the style that is used for the line-numbers
+}
+\hypersetup{
+ colorlinks=true
+}
+
+\subsectionfont{\ttfamily}
+
+% pandoc stuff
+\providecommand{\tightlist}{%
+ \setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}
+
+\let\stdsection\section
+\renewcommand\section{\newpage\stdsection}
+
+\lstset{basicstyle=\footnotesize\ttfamily,breaklines=true}
+\newcommand{\ignore}[1]{}
+\title{$title$$if(thanks)$\thanks{$thanks$}$endif$}
+\author{$for(author)$$author$$sep$ \and $endfor$}
+\date{}
+\begin{document}
+ \pagenumbering{gobble}
+ \maketitle
+ \newpage
+ \pagenumbering{alph}
+ \tableofcontents
+ \newpage
+ \pagenumbering{arabic}
+ $body$
+\end{document}