mirror of
https://github.com/hsoft/collapseos.git
synced 2024-12-27 08:28:06 +11:00
7cf3ed38da
Most of register fiddling routines (which is now the only thing contained in care.asm) are used by almost all userspace apps, often in inner loops. That makes the penalty of using jump tables for those a bit too high. Moreover, it burdens jump tables needlessly. Because this unit is very small (now that string routines are out), it makes sense to always include it in binaries.
142 lines
4.4 KiB
Markdown
142 lines
4.4 KiB
Markdown
# Writing the glue code
|
|
|
|
Collapse OS's kernel code is loosely knit. It supplies parts that you're
|
|
expected to glue together in a "glue code" asm file. Here is what a minimal
|
|
glue code for a shell on a Classic [RC2014][rc2014] with an ACIA link would
|
|
look like:
|
|
|
|
|
|
; The RAM module is selected on A15, so it has the range 0x8000-0xffff
|
|
.equ RAMSTART 0x8000
|
|
.equ RAMEND 0xffff
|
|
.equ ACIA_CTL 0x80 ; Control and status. RS off.
|
|
.equ ACIA_IO 0x81 ; Transmit. RS on.
|
|
|
|
jp init
|
|
|
|
; interrupt hook
|
|
.fill 0x38-$
|
|
jp aciaInt
|
|
|
|
.inc "err.h"
|
|
.inc "ascii.h"
|
|
.inc "core.asm"
|
|
.inc "str.asm"
|
|
.inc "parse.asm"
|
|
.equ ACIA_RAMSTART RAMSTART
|
|
.inc "acia.asm"
|
|
|
|
.equ STDIO_RAMSTART ACIA_RAMEND
|
|
.equ STDIO_GETC aciaGetC
|
|
.equ STDIO_PUTC aciaPutC
|
|
.inc "stdio.asm"
|
|
|
|
.equ SHELL_RAMSTART STDIO_RAMEND
|
|
.equ SHELL_EXTRA_CMD_COUNT 0
|
|
.inc "shell.asm"
|
|
|
|
init:
|
|
di
|
|
; setup stack
|
|
ld hl, RAMEND
|
|
ld sp, hl
|
|
im 1
|
|
|
|
call aciaInit
|
|
call shellInit
|
|
ei
|
|
jp shellLoop
|
|
|
|
Once this is written, building it is easy:
|
|
|
|
zasm < glue.asm > collapseos.bin
|
|
|
|
## Building zasm
|
|
|
|
Collapse OS has its own assembler written in z80 assembly. We call it
|
|
[zasm][zasm]. Even on a "modern" machine, it is that assembler that is used,
|
|
but because it is written in z80 assembler, it needs to be emulated (with
|
|
[libz80][libz80]).
|
|
|
|
So, the first step is to build zasm. Open `tools/emul/README.md` and follow
|
|
instructions there.
|
|
|
|
## Platform constants
|
|
|
|
The upper part of the code contains platform-related constants, information
|
|
related to the platform you're targeting. You might want to put it in an
|
|
include file if you're writing multiple glue code that targets the same machine.
|
|
|
|
In all cases, `RAMSTART` are necessary. `RAMSTART` is the offset at which
|
|
writable memory begins. This is where the different parts store their
|
|
variables.
|
|
|
|
`RAMEND` is the offset where writable memory stop. This is generally
|
|
where we put the stack, but as you can see, setting up the stack is the
|
|
responsibility of the glue code, so you can set it up however you wish.
|
|
|
|
`ACIA_*` are specific to the `acia` part. Details about them are in `acia.asm`.
|
|
If you want to manage ACIA, you need your platform to define these ports.
|
|
|
|
## Header code
|
|
|
|
Then comes the header code (code at `0x0000`), a task that also is in the glue
|
|
code's turf. `jr init` means that we run our `init` routine on boot.
|
|
|
|
`jp aciaInt` at `0x38` is needed by the `acia` part. Collapse OS doesn't dictate
|
|
a particular interrupt scheme, but some parts might. In the case of `acia`, we
|
|
require to be set in interrupt mode 1.
|
|
|
|
## Includes
|
|
|
|
This is the most important part of the glue code and it dictates what will be
|
|
included in your OS. Each part is different and has a comment header explaining
|
|
how it works, but there are a couple of mechanisms that are common to all.
|
|
|
|
### Defines
|
|
|
|
Parts can define internal constants, but also often document a "Defines" part.
|
|
These are constant that are expected to be set before you include the file.
|
|
|
|
See comment in each part for details.
|
|
|
|
### RAM management
|
|
|
|
Many parts require variables. They need to know where in RAM to store these
|
|
variables. Because parts can be mixed and matched arbitrarily, we can't use
|
|
fixed memory addresses.
|
|
|
|
This is why each part that needs variable define a `<PARTNAME>_RAMSTART`
|
|
constant that must be defined before we include the part.
|
|
|
|
Symmetrically, each part define a `<PARTNAME>_RAMEND` to indicate where its
|
|
last variable ends.
|
|
|
|
This way, we can easily and efficiently chain up the RAM of every included part.
|
|
|
|
### Tables grafting
|
|
|
|
A mechanism that is common to some parts is "table grafting". If a part works
|
|
on a list of things that need to be defined by the glue code, it will place a
|
|
label at the very end of its source file. This way, it becomes easy for the
|
|
glue code to "graft" entries to the table. This approach, although simple and
|
|
effective, only works for one table per part. But it's often enough.
|
|
|
|
For example, to define extra commands in the shell:
|
|
|
|
[...]
|
|
.equ SHELL_EXTRA_CMD_COUNT 2
|
|
#include "shell.asm"
|
|
.dw myCmd1, myCmd2
|
|
[...]
|
|
|
|
### Initialization
|
|
|
|
Then, finally, comes the `init` code. This can be pretty much anything really
|
|
and this much depends on the part you select. But if you want a shell, you will
|
|
usually end it with `shellLoop`, which never returns.
|
|
|
|
[rc2014]: https://rc2014.co.uk/
|
|
[zasm]: ../tools/emul/README.md
|
|
[libz80]: https://github.com/ggambetta/libz80
|