doc: fix a few typos and inaccuracies

doc/dict.txt

@@ -1,28 +1,23 @@
 # Dictionary
 
-List of words defined in Inner core (B390), Core words (B420)
-and Extra words (B150).
+List of words defined in arch-specific boot code (for example,
+B280 for Z80), Core words (B350) and Extra words (B150).
 
 # Glossary
 
 Stack notation: "<stack before> -- <stack after>". Rightmost is
 top of stack (TOS). For example, in "a b -- c d", b is TOS
 before, d is TOS after. "R:" means that the Return Stack is
-modified. "I:" prefix means "IMMEDIATE", that is, that this
-stack transformation is made at compile time.
+modified.
 
 Word references (wordref): When we say we have a "word
-reference", it's a pointer to a word's *code link*. For example,
-the address that "' DUP" puts on the stack is a wordref, that
-is, a reference to the code link of the word DUP.
+reference", it's a pointer to a word's *entry type field*. For
+example, the address that "' DUP" puts on the stack is a
+wordref, that is, a reference to the entry type field of the
+word DUP. See impl.txt for details.
 
-PF: Parameter field. The area following the code link of a
-word. For example, "' H@ 1+" points to the PF of the word H@.
-
-Atom: A word of the type compiledWord contains, in its PF, a
-list of what we call "atoms". Those atoms are most of the time
-word references, but they can also be references to NUMBER and
-LIT.
+PF: Parameter field. The area following the entry type field of
+a word. For example, "' H@ 1+" points to the PF of the word H@.
 
 Words between "()" are "support words" that aren't really meant
 to be used directly, but as part of another word.
@@ -59,21 +54,22 @@ $ - Initialize
 ALLOT    n --     Move HERE by n bytes
 C,       b --     Write byte b in HERE and advance it.
 FIND     w -- a f Like '?, but for w.
-EMPTY  --         Rewind HERE and CURRENT where they were at
+EMPTY    --       Rewind HERE and CURRENT where they were at
                   system initialization.            
-FORGET x --       Rewind the dictionary (both CURRENT and HERE)
+FORGET   x --     Rewind the dictionary (both CURRENT and HERE)
                   up to x's previous entry.             
-PREV   a -- a     Return a wordref's previous entry.
-WORD(  a -- a     Get wordref's beginning addr.
+PREV     a -- a   Return a wordref's previous entry.
+WORD(    a -- a   Get wordref's beginning addr.
 
 # Defining words
 
 : x ...     --     Define a new word
 ;           R:I -- Exit a colon definition
 CREATE x    --     Create cell named x. Doesn't allocate a PF.
-[COMPILE] x --     Compile word x and write it to HERE.
+[COMPILE] x --     *I* Compile word x and write it to HERE.
                    IMMEDIATE words are *not* executed.
-COMPILE x   --     Meta compiles. See B6.
+COMPILE x   --     *I* Meta compiles: write wordrefs that will
+                   compile x when executed.
 CONSTANT x  n --   Creates cell x that when called pushes its
                    value.
 DOES>       --     See primer.txt
@@ -105,7 +101,7 @@ have to consume it to avoid PSP leak.
                following bytes. Can be negative.
 (?br)     f -- Branch if f is false.
 (         --   *I* Comment. Ignore input until ")" is read.
-[         --   Begin interpretative mode. In a definition,
+[         --   *I* Begin interpretative mode. In a definition,
                execute words instead of compiling them.
 ]         --   End interpretative mode.
 ABORT     --   Resets PS and RS and returns to interpreter.
@@ -113,10 +109,9 @@ ABORT" x" --   *I* Compiles a ." followed by a ABORT.
 ERR       a -- Prints a and ABORT. Defined early and used by
                drivers.
 EXECUTE   a -- Execute wordref at addr a
-INTERPRET --   Get a line from stdin, compile it in tmp memory,
-               then execute the compiled contents.
+INTERPRET --   Main interpret loop.
 LEAVE     --   In a DO..LOOP, exit at the next LOOP call.
-QUIT      --   Return to interpreter prompt immediately
+QUIT      --   Return to interpreter prompt immediately.
 
 # Parameter Stack
 
@@ -226,11 +221,10 @@ NOT  f -- f     Push the logical opposite of f
 
 # Strings
 
-LIT    --         Write a LIT entry. You're expected to write
-                  actual string to HERE right afterwards.
-LIT< x --         Read following word and write to HERE as a
-                  string literal.
-S=     a1 a2 -- f Returns whether string a1 == a2.
+LIT< x  --         Read following word and write to HERE as a
+                   string literal.
+LIT" x" --         Same as LIT<, but can contain whitespaces.
+S=      a1 a2 -- f Returns whether string a1 == a2.
 
 # I/O
 

doc/impl.txt

@@ -14,7 +14,7 @@ it. As a general rule, we go like this:
 
 # Executing a word
 
-At it's core, executing a word is pushing the wordref on PS and
+At its core, executing a word is pushing the wordref on PS and
 calling EXECUTE. Then, we let the word do its things. Some
 words are special, but most of them are of the "compiled"
 type (regular nonnative word), and that's their execution that
@@ -30,10 +30,16 @@ contain a wordref to execute next, after we EXIT.
 At the end of every compiled word is an EXIT. This pops RS, sets
 IP to it, and continues.
 
+A compiled word is simply a list of wordrefs, but not all those
+wordrefs are 2 bytes in length. Some wordrefs are special. For
+example, a reference to (n) will be followed by an extra 2 bytes
+number. It's the responsibility of the (n) word to advance IP
+by 2 extra bytes.
+
 # Stack management
 
 In all supported arches, The Parameter Stack and Return Stack
-tops are trackes by a registered assigned to this purpose. For
+tops are tracked by a registered assigned to this purpose. For
 example, in z80, it's SP and IX that do that. The value in those
 registers are referred to as PS Pointer (PSP) and RS Pointer
 (RSP).
@@ -65,7 +71,7 @@ A dictionary entry has this structure:
 - Parameter field (PF)
 
 The prev offset is the number of bytes between the prev field
-and the previous word's code pointer.
+and the previous word's entry type.
 
 The size + flag indicate the size of the name field, with the
 7th bit being the IMMEDIATE flag.
@@ -83,15 +89,15 @@ number is the word type and the word's behavior depends on it.
 0: native. This words PFA contains native binary code and is
 jumped to directly.
 
-1: compiled. This word's PFA contains an atom list and its
+1: compiled. This word's PFA contains a list of wordrefs and its
 execution is described in "Execution model" above.
 
 2: cell. This word is usually followed by a 2-byte value in its
 PFA. Upon execution, the address of the PFA is pushed to PS.
 
 3: DOES>. This word is created by "DOES>" and is followed
-by a 2-byte value as well as the address where "DOES>" was
-compiled. At that address is an atom list exactly like in a
+by a 2-bytes value as well as the address where "DOES>" was
+compiled. At that address is an wordref list exactly like in a
 compiled word. Upon execution, after having pushed its cell
 addr to PSP, it executes its reference exactly like a
 compiled word.
@@ -131,10 +137,6 @@ CURRENT points to the last dict entry.
 
 HERE points to current write offset.
 
-IP is the Interpreter Pointer
-
-PARSEPTR holds routine address called on (parse)
-
 C<* holds routine address called on C<. If the C<* override
 at 0x08 is nonzero, this routine is called instead.
 
@@ -153,10 +155,10 @@ CRLF).
 
 BLK* see B416.
 
-FUTURE USES section is unused for now.          
-
 DRIVERS section is reserved for recipe-specific drivers.
 
+FUTURE USES section is unused for now.          
+
 # Initialization sequence
 
 (this describes the z80 boot sequence, but other arches have

doc/intro.txt

@@ -2,7 +2,7 @@
 
 Collapse OS is a minimal operating system created to preserve
 the ability to program microcontrollers through civilizational
-collapse. Its author expect the collapse of the global supply
+collapse. Its author expects the collapse of the global supply
 chain means the loss of our computer production capability. Many
 microcontrollers require a computer to program them.
 

doc/primer.txt

@@ -18,7 +18,7 @@ the top of the stack, then prints the result.
 42 0x8000 C! 0x8000 C@ .
 
 This writes the byte "42" at address 0x8000, and then reads
-back that bytes from the same address and print it.
+back that byte from the same address and print it.
 
 # Interpreter loop
 
@@ -37,7 +37,7 @@ Forth's main interpeter loop is very simple:
 
 A word is a string of non-whitepace characters. We consider that
 we're finished reading a word when we encounter a whitespace
-after having read at least one non-whitespace character
+after having read at least one non-whitespace character.
 
 # Character encoding
 
@@ -244,7 +244,7 @@ compilation.
 Words like "IF", "DO", ";" are all regular Forth words, but
 their "power" come from the fact that they're immediate.
 
-Starting Forth by Leo Brodie explain all of this in details.
+Starting Forth by Leo Brodie explains all of this in detail.
 Read this if you can. If you can't, well, let this sink in for
 a while, browse the dictionary (dict.txt) and try to understand
 why this or that word is immediate. Good luck!