collapseos/recipes/trs80/xcomp.fs

0xff00 CONSTANT RS_ADDR
0xfffa CONSTANT PS_ADDR
RS_ADDR 0x80 - CONSTANT SYSVARS
0 CONSTANT HERESTART
5 LOAD   ( z80 assembler )
262 LOAD ( xcomp )
282 LOAD ( boot.z80.decl )
270 LOAD ( xcomp overrides )
0x3000 BIN( !
283 335 LOADR ( boot.z80 )
353 LOAD ( xcomp core low )
602 LOAD ( trs80 )
390 LOAD ( xcomp core high )
(entry) _
( Update LATEST )
PC ORG @ 8 + !
( TRS-80 wants CR-only newlines )
," ' CR ' NL **! BLK$ FD$ " EOT,
ORG @ 256 /MOD 2 PC! 2 PC!
H@ 256 /MOD 2 PC! 2 PC!
By default, allocate about 0x100 bytes for PSP+RSP During "make updatebootstrap", we use less than 0x20 bytes on the PSP side and less than 0x40 bytes on the RSP one. 0x100 bytes ought to be enough for anybody. 2020-05-15 08:41:09 +10:00			`0xff00 CONSTANT RS_ADDR`
Replace INITIAL_SP with PS_ADDR conf Now I struggle to remember why I ever did things they way I did. There must have been a reason... 2020-05-12 11:08:24 +10:00			`0xfffa CONSTANT PS_ADDR`
Rename RAMSTART to SYSVARS It's more descriptive this way. Also, I'll soon add a new HERESTART config. 2020-06-29 08:49:30 +10:00			`RS_ADDR 0x80 - CONSTANT SYSVARS`
Add HERESTART xcomp config 2020-06-29 09:45:28 +10:00			`0 CONSTANT HERESTART`
Move z80a from B200 to B5 The idea is to consider assemblers as "runtime" apps instead of placing them in the "bootstrap" section of the blocks. These apps will be used for much more than bootstrapping. Moved its documentation to doc/asm.txt and made its code blocks more compact. 2020-09-22 07:51:08 +10:00			`5 LOAD ( z80 assembler )`
z80: make boot binary a 2-part process Previously, recipes that began spitting binary contents before loading block 282 would end up with VARIABLE code in their binary, thus breaking them. We fix this by making this loading process 2-part. 2020-06-27 11:41:17 +10:00			`262 LOAD ( xcomp )`
			`282 LOAD ( boot.z80.decl )`
			`270 LOAD ( xcomp overrides )`
recipes/trs80: wip 2020-04-28 21:51:41 +10:00			`0x3000 BIN( !`
z80: make boot binary a 2-part process Previously, recipes that began spitting binary contents before loading block 282 would end up with VARIABLE code in their binary, thus breaking them. We fix this by making this loading process 2-part. 2020-06-27 11:41:17 +10:00			`283 335 LOADR ( boot.z80 )`
			`353 LOAD ( xcomp core low )`
recipes/trs80: move recipe blocks into local overlay 2020-09-21 01:57:04 +10:00			`602 LOAD ( trs80 )`
Move most of the high layer of comp core into the low one With KEY and EMIT being switch words, most of the high layer can be defined before drivers. In addition to this change, I've compacted core blocks which were becoming quite sparse. 2020-10-29 09:06:58 +11:00			`390 LOAD ( xcomp core high )`
recipes/trs80: wip 2020-04-28 21:51:41 +10:00			`(entry) _`
			`( Update LATEST )`
xcomp: remove XOFF and use ORG and BIN( instead 2020-04-28 23:15:17 +10:00			`PC ORG @ 8 + !`
Make KEY and EMIT into switch words 2020-10-29 07:00:58 +11:00			`( TRS-80 wants CR-only newlines )`
			`," ' CR ' NL **! BLK$ FD$ " EOT,`
xcomp: move all offset spitting to the end of the unit I'd like to move this code, along with all recipe contents, to blk/. It's easier if "emul-related" code is gathered at the same place. 2020-05-06 10:10:04 +10:00			`ORG @ 256 /MOD 2 PC! 2 PC!`
recipes/trs80: wip 2020-04-28 21:51:41 +10:00			`H@ 256 /MOD 2 PC! 2 PC!`