collapseos/parts/z80/blockdev.asm

; blockdev
;
; A block device is an abstraction over something we can read from, write to.
;
; A device that fits this abstraction puts the properly hook into itself, and
; then the glue code assigns a blockdev ID to that device. It then becomes easy
; to access arbitrary devices in a convenient manner.
;
; This part exposes a new "bsel" command to select the currently active block
; device.

; *** DEFINES ***
; BLOCKDEV_COUNT: The number of devices we manage.

; *** CONSTS ***
BLOCKDEV_ERR_OUT_OF_BOUNDS	.equ	0x03
BLOCKDEV_ERR_UNSUPPORTED	.equ	0x04

BLOCKDEV_SEEK_ABSOLUTE		.equ	0
BLOCKDEV_SEEK_FORWARD		.equ	1
BLOCKDEV_SEEK_BACKWARD		.equ	2
BLOCKDEV_SEEK_BEGINNING		.equ	3
BLOCKDEV_SEEK_END		.equ	4

; *** VARIABLES ***
; Pointer to the selected block device. A block device is a 8 bytes block of
; memory with pointers to GetC, PutC, Seek and Tell routines, in that order.
; 0 means unsupported.
BLOCKDEV_GETC		.equ	BLOCKDEV_RAMSTART
BLOCKDEV_PUTC		.equ	BLOCKDEV_GETC+2
BLOCKDEV_SEEK		.equ	BLOCKDEV_PUTC+2
BLOCKDEV_TELL		.equ	BLOCKDEV_SEEK+2
BLOCKDEV_RAMEND		.equ	BLOCKDEV_TELL+2

; *** CODE ***
; Select block index specified in A and place them in routine pointers at (DE).
; For example, for a "regular" blkSel, you will want to set DE to BLOCKDEV_GETC.
blkSel:
	push	af
	push	de
	push	hl
	ld	hl, blkDevTbl
	cp	0
	jr	z, .afterloop	; index is zero? don't loop
	push	bc
	ld	b, a
.loop:
	ld	a, 8
	call	addHL
	djnz	.loop
	pop	bc
.afterloop:
	push	hl
	call	intoHL
	call	writeHLinDE
	inc	de
	inc	de
	pop	hl
	inc	hl
	inc	hl
	push	hl
	call	intoHL
	call	writeHLinDE
	inc	de
	inc	de
	pop	hl
	inc	hl
	inc	hl
	push	hl
	call	intoHL
	call	writeHLinDE
	inc	de
	inc	de
	pop	hl
	inc	hl
	inc	hl
	call	intoHL
	call	writeHLinDE
	pop	hl
	pop	de
	pop	af
	ret

; call IX unless it's zero
_blkCall:
	; Before we call... is IX zero? We don't want to call a zero.
	push	af
	xor	a
	cp	ixh
	jr	nz, .ok		; not zero, ok
	cp	ixl
	jr	z, .error	; zero, error
.ok:
	pop	af
	call	callIX
	ret
.error:
	pop	af
	ld	a, BLOCKDEV_ERR_UNSUPPORTED
	ret

; Reads one character from selected device and returns its value in A.
; Sets Z according to whether read was successful: Set if successful, unset
; if not.
blkGetC:
	ld	ix, (BLOCKDEV_GETC)
	jr	_blkCall

; Repeatedly call blkGetC until the call is a success.
blkGetCW:
	ld	ix, (BLOCKDEV_GETC)
.loop:
	call	callIX
	jr	nz, .loop
	ret

; Reads B chars from blkGetC and copy them in (HL).
; Sets Z if successful, unset Z if there was an error.
blkRead:
	ld	ix, (BLOCKDEV_GETC)
_blkRead:
	push	hl
	push	bc
.loop:
	call	_blkCall
	jr	nz, .end	; Z already unset
	ld	(hl), a
	inc	hl
	djnz	.loop
	cp	a	; ensure Z
.end:
	pop	bc
	pop	hl
	ret

; Writes character in A in current position in the selected device. Sets Z
; according to whether the operation was successful.
blkPutC:
	ld	ix, (BLOCKDEV_PUTC)
	jr	_blkCall

; Writes B chars to blkPutC from (HL).
; Sets Z if successful, unset Z if there was an error.
blkWrite:
	ld	ix, (BLOCKDEV_PUTC)
_blkWrite:
	push	hl
	push	bc
.loop:
	ld	a, (hl)
	call	_blkCall
	jr	nz, .end	; Z already unset
	inc	hl
	djnz	.loop
	cp	a	; ensure Z
.end:
	pop	bc
	pop	hl
	ret

; Seeks the block device in one of 5 modes, which is the A argument:
; 0 : Move exactly to X, X being the HL argument.
; 1 : Move forward by X bytes, X being the HL argument
; 2 : Move backwards by X bytes, X being the HL argument
; 3 : Move to the end
; 4 : Move to the beginning
; Set position of selected device to the value specified in HL
;
; When seeking to an out-of-bounds position, the resulting position will be
; one position ahead of the last valid position. Therefore, GetC after a seek
; to end would always fail.
;
; If the device is "growable", it's possible that seeking to end when calling
; PutC doesn't necessarily result in a failure.
blkSeek:
	ld	ix, (BLOCKDEV_SEEK)
	ld	iy, (BLOCKDEV_TELL)
_blkSeek:
	push	de
	cp	BLOCKDEV_SEEK_FORWARD
	jr	z, .forward
	cp	BLOCKDEV_SEEK_BACKWARD
	jr	z, .backward
	cp	BLOCKDEV_SEEK_BEGINNING
	jr	z, .beginning
	cp	BLOCKDEV_SEEK_END
	jr	z, .end
	; all other modes are considered absolute
	jr	.seek		; for absolute mode, HL is already correct
.forward:
	ex	hl, de		; DE has our offset
	; We want to be able to plug our own TELL function, which is why we
	; don't call blkTell directly here.
	; Calling TELL
	call	callIY	; HL has our curpos
	add	hl, de
	jr	nc, .seek	; no carry? alright!
	; we have carry? out of bounds, set to maximum
.backward:
	; TODO - subtraction are more complicated...
	jr	.seek
.beginning:
	ld	hl, 0
	jr	.seek
.end:
	ld	hl, 0xffff
.seek:
	pop	de
	jr	_blkCall

; Returns the current position of the selected device in HL.
blkTell:
	ld	ix, (BLOCKDEV_TELL)
	jr	_blkCall

; This label is at the end of the file on purpose: the glue file should include
; a list of device routine table entries just after the include. Each line
; has 4 word addresses: GetC, PutC and Seek, Tell. An entry could look like:
; .dw     mmapGetC, mmapPutC, mmapSeek, mmapTell
blkDevTbl: