collapseos/blk/434

: _sdc!  ( srcaddr blkno -- )
    [ SDC_DEVID LITN ] (spie)
    0x58 ( CMD24 ) 0 ROT ( a cmd 0 blkno ) _cmd
    IF _err THEN
    _idle DROP 0xfe (spix) DROP 0 SWAP ( crc a )
    512 0 DO         ( crc a )
        C@+          ( crc a+1 n )
        ROT OVER     ( a n crc n )
        _crc16       ( a n crc )
        SWAP         ( a crc n )
        (spix) DROP  ( a crc )
        SWAP         ( crc a )
    LOOP
    DROP ( crc ) 256 /MOD ( lsb msb )
    (spix) DROP (spix) DROP
    _wait DROP 0 (spie) ;
Copy sdc driver to blkfs 2020-04-24 03:55:00 +10:00			`: _sdc! ( srcaddr blkno -- )`
Make the SPI Relay protocol support multiple devices Working on programming AVR chips exposes a glaring omission in my first design of the SPI Relay: not allowing multiple devices make this task hard. I constantly have to unplug my SD card before, plug the AVR chip holder, then play a bit, then unplug the AVR holder, then replug the SD card... My prototype for a SPI relay design is built, but I haven't tested it yet. I need to adapt the code first, which is what I do here. When the prototype is tested, I'll update the SDC recipe with a new schema. 2020-09-17 23:36:16 +10:00			`[ SDC_DEVID LITN ] (spie)`
			`0x58 ( CMD24 ) 0 ROT ( a cmd 0 blkno ) _cmd`
Copy sdc driver to blkfs 2020-04-24 03:55:00 +10:00			`IF _err THEN`
Make the SPI Relay protocol support multiple devices Working on programming AVR chips exposes a glaring omission in my first design of the SPI Relay: not allowing multiple devices make this task hard. I constantly have to unplug my SD card before, plug the AVR chip holder, then play a bit, then unplug the AVR holder, then replug the SD card... My prototype for a SPI relay design is built, but I haven't tested it yet. I need to adapt the code first, which is what I do here. When the prototype is tested, I'll update the SDC recipe with a new schema. 2020-09-17 23:36:16 +10:00			`_idle DROP 0xfe (spix) DROP 0 SWAP ( crc a )`
Copy sdc driver to blkfs 2020-04-24 03:55:00 +10:00			`512 0 DO ( crc a )`
			`C@+ ( crc a+1 n )`
			`ROT OVER ( a n crc n )`
			`_crc16 ( a n crc )`
			`SWAP ( a crc n )`
rc2014: separate SPI relay and SDC drivers My intention is to reuse the SPI relay to program AVR MCUs from a RC2014. 2020-06-30 08:48:00 +10:00			`(spix) DROP ( a crc )`
Copy sdc driver to blkfs 2020-04-24 03:55:00 +10:00			`SWAP ( crc a )`
			`LOOP`
			`DROP ( crc ) 256 /MOD ( lsb msb )`
rc2014: separate SPI relay and SDC drivers My intention is to reuse the SPI relay to program AVR MCUs from a RC2014. 2020-06-30 08:48:00 +10:00			`(spix) DROP (spix) DROP`
Make the SPI Relay protocol support multiple devices Working on programming AVR chips exposes a glaring omission in my first design of the SPI Relay: not allowing multiple devices make this task hard. I constantly have to unplug my SD card before, plug the AVR chip holder, then play a bit, then unplug the AVR holder, then replug the SD card... My prototype for a SPI relay design is built, but I haven't tested it yet. I need to adapt the code first, which is what I do here. When the prototype is tested, I'll update the SDC recipe with a new schema. 2020-09-17 23:36:16 +10:00			`_wait DROP 0 (spie) ;`