collapseos/recipes/trs80/xcomp.fs

0xff00 CONSTANT RS_ADDR
0xfffa CONSTANT PS_ADDR
RS_ADDR 0x80 - CONSTANT RAMSTART
212 LOAD  ( z80 assembler )
262 LOAD  ( xcomp )
270 LOAD  ( xcomp overrides )

0x3000 BIN( !
282 LOAD  ( boot.z80 )
353 LOAD  ( xcomp core low )
492 LOAD  ( trs80 )
380 LOAD  ( xcomp core high )
(entry) _
( Update LATEST )
PC ORG @ 8 + !
," CURRENT @ HERE ! "
( 0x0a == NLPTR. TRS-80 wants CR-only newlines )
," ' CR 0x0a RAM+ ! BLK$ FD$ " EOT,
ORG @ 256 /MOD 2 PC! 2 PC!
H@ 256 /MOD 2 PC! 2 PC!
By default, allocate about 0x100 bytes for PSP+RSP During "make updatebootstrap", we use less than 0x20 bytes on the PSP side and less than 0x40 bytes on the RSP one. 0x100 bytes ought to be enough for anybody. 2020-05-15 08:41:09 +10:00			`0xff00 CONSTANT RS_ADDR`
Replace INITIAL_SP with PS_ADDR conf Now I struggle to remember why I ever did things they way I did. There must have been a reason... 2020-05-12 11:08:24 +10:00			`0xfffa CONSTANT PS_ADDR`
recipes/trs80: running! no floppy yet. 2020-04-30 02:26:44 +10:00			`RS_ADDR 0x80 - CONSTANT RAMSTART`
recipes/trs80: wip 2020-04-28 21:51:41 +10:00			`212 LOAD ( z80 assembler )`
			`262 LOAD ( xcomp )`
xcomp: add overrides into a loadable block Makes xcomp.fs units shorter. 2020-05-14 03:33:24 +10:00			`270 LOAD ( xcomp overrides )`
recipes/trs80: wip 2020-04-28 21:51:41 +10:00
			`0x3000 BIN( !`
			`282 LOAD ( boot.z80 )`
Move Cross-compiled core from B390 to B350 and renamed it "Core words". Also, reworded the presentation. 2020-05-16 12:44:49 +10:00			`353 LOAD ( xcomp core low )`
trs80: adapt recipe to single stage xcomp 2020-05-15 02:08:17 +10:00			`492 LOAD ( trs80 )`
Move Cross-compiled core from B390 to B350 and renamed it "Core words". Also, reworded the presentation. 2020-05-16 12:44:49 +10:00			`380 LOAD ( xcomp core high )`
recipes/trs80: wip 2020-04-28 21:51:41 +10:00			`(entry) _`
			`( Update LATEST )`
xcomp: remove XOFF and use ORG and BIN( instead 2020-04-28 23:15:17 +10:00			`PC ORG @ 8 + !`
recipes/trs80: running! no floppy yet. 2020-04-30 02:26:44 +10:00			`," CURRENT @ HERE ! "`
trs80: override NL to avoid double newlines 2020-05-04 23:21:10 +10:00			`( 0x0a == NLPTR. TRS-80 wants CR-only newlines )`
Streamline initialization process Instead of letting each configuration taking care of RDLN$ and "CollapseOS" prompt, move this to BOOT to simplify xcomp units. Initialization source code is now only for driver initialization. 2020-05-16 01:34:35 +10:00			`," ' CR 0x0a RAM+ ! BLK$ FD$ " EOT,`
xcomp: move all offset spitting to the end of the unit I'd like to move this code, along with all recipe contents, to blk/. It's easier if "emul-related" code is gathered at the same place. 2020-05-06 10:10:04 +10:00			`ORG @ 256 /MOD 2 PC! 2 PC!`
recipes/trs80: wip 2020-04-28 21:51:41 +10:00			`H@ 256 /MOD 2 PC! 2 PC!`