added pcap.lua for the vtunnel bridge, whoops

programs.cfg

@@ -85,6 +85,7 @@
  ["vtunnel"] = {
   files = {
    ["master/vTunnel/interminitel.lua"] = "/lib",
+   ["master/vTunnel/OpenOS/usr/man/vtunnel"] = "/man",
    ["master/vTunnel/OpenOS/etc/rc.d/vtunnel.lua"] = "//etc/rc.d",
   },
   dependencies = {

vTunnel/OpenOS/etc/rc.d/vtunnel.lua

@@ -1,88 +1,142 @@
-local vcomp = require "vcomponent"
+local vcomponent = require "vcomponent"
+local serial = require "serialization"
 local component = require "component"
 local computer = require "computer"
-local imt = require "interminitel"
 local event = require "event"
-local internet = component.internet
+local imt = require "interminitel"
 
-local addr, raddr = vcomp.uuid(),vcomp.uuid()
+local cfg = {}
-local poll = 0.5
+cfg.peers = {}
-local listener, timer
+cfg.rtimer = 5
-local socket
+cfg.katimer = 30
+local listeners = {}
+local timers = {}
+local proxies = {}
 
--- dumb keepalive stuff
+local function loadcfg()
-local keepalive = 30
+ local f = io.open("/etc/vtunnel.cfg","rb")
-local katimer
+ if not f then return false end
-
+ for k,v in pairs(serial.unserialize(f:read("*a")) or {}) do
-function start(faddr)
+  cfg[k] = v
- if listener then return end
- if faddr then
-  local host,nport = faddr:match("(.+):(%d+)")
  end
- local iaddr,port = host or faddr or "shadowkat.net", tonumber(nport) or 4096
+ f:close()
- socket = internet.connect(iaddr,port)
+end
- print("Connecting to "..iaddr..":"..tostring(port).."...")
+local function savecfg()
+ local f = io.open("/etc/vtunnel.cfg","wb")
+ if not f then 
+  print("Warning: unable to save configuration.")
+  return false
+ end
+ f:write(serial.serialize(cfg))
+ f:close()
+end
+
+local function createTunnel(host,port,addr,raddr)
+ local proxy = {address=addr,buffer=""}
+ function proxy.connect()
+  if proxy.socket then
+   proxy.socket.close()
+  end
+  proxy.socket = component.internet.connect(host,port)
+  local st = computer.uptime()
   repeat
-  os.sleep(0.5)
+   coroutine.yield()
- until socket.finishConnect()
+  until proxy.socket.finishConnect() or computer.uptime() > st+5
- print("Connected!")
- 
- local proxy = {}
- local rbuffer = ""
- local timer = nil
- 
- function listener(t)
-  rbuffer=rbuffer..(socket.read(4096) or "")
-  if imt.decodePacket(rbuffer) then
-   computer.pushSignal("modem_message",addr,raddr,0,0,imt.decodePacket(rbuffer))
-   rbuffer = imt.getRemainder(rbuffer) or ""
  end
-  if t == "internet_ready" and timer then
-   event.cancel(timer)
-   timer = nil
-  end
- end
- timer = event.timer(poll,listener,math.huge) -- this is only here because OCEmu doesn't do internet_ready
- event.listen("internet_ready",listener)
- 
- -- also dumb keepalive stuff, fix this later
- katimer = event.timer(keepalive,function()
-  socket.write("\0\1\0")
- end,math.huge)
- 
  function proxy.send(...)
-  socket.write(imt.encodePacket(...))
+  rt = 0
+  while not proxy.socket.write(imt.encodePacket(...)) and rt < 10 do
+   proxy.connect()
+   rt = rt + 1
   end
- 
+  proxy.last = computer.uptime()
- function proxy.maxPacketSize()
-  return 12288
  end
- 
+ function proxy.read()
- proxy.type = "tunnel"
+  local rb, r
- proxy.slot = 4096
+  local rt = 0
- 
+  while true do
- local docs = {
+   rb,r = proxy.socket.read(4096)
-  send = "function(data...) -- Sends the specified data to the card this one is linked to.",
+   if rb or rt > 10 then break end
-  maxPacketSize = "function():number -- Gets the maximum packet size (config setting)."
+   if type(rb) == "nil" then
- }
+    proxy.connect()
- vcomp.register(addr,"tunnel",proxy,docs)
+   end
+   rt = rt + 1
+  end
+  proxy.buffer = proxy.buffer .. rb
+  while imt.decodePacket(proxy.buffer) do
+   computer.pushSignal("modem_message",addr,raddr,0,0,imt.decodePacket(proxy.buffer))
+   proxy.buffer = imt.getRemainder(proxy.buffer) or ""
+  end
+  if computer.uptime() > proxy.last + cfg.katimer then
+   proxy.socket.write("\0\1\0")
+   proxy.last = computer.uptime()
+  end
+ end
+ event.listen("internet_ready",proxy.read)
+ listeners[addr] = {"internet_ready",proxy.read}
+ timers[addr] = event.timer(cfg.rtimer, proxy.read, math.huge)
+ proxy.connect()
+ proxy.last = computer.uptime()
+ return proxy
 end
 
+function start()
+ loadcfg()
+ for k,v in pairs(cfg.peers) do
+  print(string.format("Connecting to %s:%d",v.host,v.port))
+  v.addr = v.addr or vcomponent.uuid()
+  v.raddr = v.raddr or vcomponent.uuid()
+  local px = createTunnel(v.host, v.port, v.addr, v.raddr)
+  vcomponent.register(v.addr, "tunnel", px)
+  proxies[v.addr] = px
+ end
+end
 function stop()
- if listener then
+ for k,v in pairs(listeners) do
-  event.ignore("internet_ready",listener)
+  event.ignore(v[1],v[2])
-  listener = nil
  end
- if timer then
+ for k,v in pairs(timers) do
-  event.cancel(timer)
+  event.cancel(v)
-  timer = nil
  end
- if katimer then
+ for k,v in pairs(proxies) do
-  event.cancel(katimer)
+  vcomponent.unregister(k)
-  katimer = nil
  end
- if component.type(addr) then
+end
-  vcomp.unregister(addr)
+
- end
+function settimer(time)
- socket.close()
+ time = tonumber(time)
+ if not time then
+  print("Timer must be a number.")
+  return false
+ end
+ cfg.rtime = time
+ savecfg()
+end
+
+function addpeer(host,port)
+ port = tonumber(port) or 4096
+ local t = {}
+ t.host = host
+ t.port = port
+ t.addr = vcomponent.uuid()
+ t.raddr = vcomponent.uuid()
+ cfg.peers[#cfg.peers+1] = t
+ print(string.format("Added peer #%d (%s:%d) to the configuration.\nRestart to apply changes.",#cfg.peers,host,port))
+ savecfg()
+end
+
+function listpeers()
+ for k,v in pairs(cfg.peers) do
+  print(string.format("#%d (%s:%d)\n Local address: %s\n Remote address: %s",k,v.host,v.port,v.addr,v.raddr))
+ end
+end
+function delpeer(n)
+ n=tonumber(n)
+ if not n then
+  print("delpeer requires a number, representing the peer number, as an argument.")
+  return false
+ end
+ local dp = table.remove(cfg.peers, n)
+ savecfg()
+ print(string.format("Removed peer %s:%d",dp.host, dp.port))
 end

vTunnel/OpenOS/usr/man/vtunnel

@@ -0,0 +1,75 @@
+# vTunnel - TCP-based Linked Card Emulator
+
+vTunnel can be used to add bridging over the internet to any existing OpenOS software that uses linked cards.
+
+Despite originally being written for Minitel, vTunnel implements a fully-functional linked card emulator and a server that will run under most unix-likes (OpenBSD is currently somewhat flaky, Linux is recommended).
+
+The protocol is documented [here](vtunnel-protocol.md)
+
+## Setup
+
+### Server Requirements
+
+- Some form of unix-like
+- Lua 5.2 or 5.3
+- Luasocket
+
+### Client Installation
+
+#### OPPM
+
+```
+oppm install vtunnel
+```
+
+#### Manual
+
+1. Install vtunnel.lua to /etc/rc.d
+2. Install interminitel.lua to /usr/lib
+
+### Client setup
+
+#### Creating a connection
+Many connections can be configured. To add one:
+
+```
+rc vtunnel addpeer <server address> <server port>
+```
+
+## Usage
+
+### Running the server
+
+At present, all you need to do is run bridge.lua, for example:
+
+```
+lua53 bridge.lua [port] [timeout]
+```
+
+### Client
+
+vTunnel is invoked as follows:
+
+```
+rc vtunnel start
+```
+
+vTunnel can also be configured to start automatically:
+
+```
+rc vtunnel enable
+```
+
+There are several other commands available under `rc vtunnel`:
+
+ - settimer - allows you to configure how often vTunnel polls the TCP socket
+ - listpeers - shows which peers are configured, and the associated tunnel card addresses
+ - delpeer - deletes a peer from the configuration, as shown in listpeers
+
+### Minitel configuration
+
+1. Disable minitel with rc - `rc minitel disable`
+2. Enable vtunnel with rc - `rc vtunnel enable`
+3. Enable minitel with rc - `rc minitel enable`
+
+This will ensure that Minitel starts later than vTunnel, allowing it to see the virtual tunnel component.

vTunnel/README.md

@@ -1,72 +0,0 @@
-# vTunnel - TCP-based Linked Card Emulator
-
-vTunnel can be used to add bridging over the internet to any existing OpenOS software that uses linked cards.
-
-Despite originally being written for Minitel, vTunnel implements a fully-functional linked card emulator and a server that will run under most unix-likes (OpenBSD is currently somewhat flaky, Linux is recommended).
-
-The protocol is documented [here](vtunnel-protocol.md)
-
-## Setup
-
-### Server
-
-#### Requirements
-
-- Some form of unix-like
-- Lua 5.2 or 5.3
-- Luasocket
-
-#### Running the server
-
-At present, all you need to do is run bridge.lua, for example:
-
-```
-lua53 bridge.lua [port] [timeout]
-```
-
-### Client
-
-#### OPPM
-
-```
-oppm install vtunnel
-```
-
-#### Manual
-
-1. Install vtunnel.lua to /etc/rc.d
-2. Install interminitel.lua to /usr/lib
-
-#### Running
-
-vTunnel is invoked as follows:
-
-```
-rc vtunnel start <server address>:<server port>
-```
-
-This will create a virtual linked card component connected to server\_address:server\_port.
-
-#### Configuration
-
-vTunnel can also be configured to start automatically. First, one would enable the rc service:
-
-```
-rc vtunnel enable
-```
-
-Then, edit /etc/rc.cfg and add a line as follows:
-
-```
-vtunnel = "server.address:port"
-```
-
-Leaving it as default will result in vTunnel connecting to the public SKS bridge.
-
-#### Minitel configuration
-
-1. Disable minitel with rc - `rc minitel disable`
-2. Enable vtunnel with rc - `rc vtunnel enable`
-3. Enable minitel with rc - `rc minitel enable`
-
-This will ensure that Minitel starts later than vTunnel, allowing it to see the virtual tunnel component.

vTunnel/README.md

@@ -0,0 +1 @@
+OpenOS/usr/man/vtunnel

vTunnel/Wireshark/imtdissector.lua

@@ -0,0 +1,70 @@
+local imtp = Proto("imt","InterMinitel")
+local imt = require "interminitel"
+
+local pid = ProtoField.string("imt.packet_id","Packet ID")
+local ptype = ProtoField.int32("imt.packet_type","Packet type")
+local dest = ProtoField.string("imt.destination","Destination address")
+local src = ProtoField.string("imt.source","Source address")
+local port = ProtoField.int32("imt.port","Port")
+local data = ProtoField.string("imt.data","Data")
+local conv = ProtoField.int32("imt.conversation","Conversation")
+local cport = ProtoField.int32("imt.conversation_port","Conversation Port")
+
+local seg = ProtoField.string("imt.segment","Segment")
+
+imtp.fields = {pid, ptype, dest, src, port, data, conv, cport}
+
+local conversations = {}
+local function checkConversation(p,c)
+ if p[5] == c.port and c.addresses[p[4]] and c.addresses[p[3]] then
+  return true
+ end
+ return false
+end
+local conversationPackets = {}
+
+function imtp.dissector(buffer,pinfo,tree)
+ pinfo.cols.protocol=imtp.name
+ local d = buffer():string()
+ local dp, sp = imt.decodePacket(d)
+ local subtree = tree:add(imtp,"InterMinitel Data")
+ for k,v in pairs(dp) do
+  subtree:add(imtp.fields[k], buffer(sp[k], tostring(v):len()), v)
+ end
+ pinfo.cols.src = dp[4]
+ pinfo.cols.dst = dp[3]
+ pinfo.cols.src_port = dp[5]
+ pinfo.cols.dst_port = dp[5]
+ if dp[2] == "0" then
+  pinfo.cols.info = "Unreliable packet."
+ elseif dp[2] == "1" then
+  pinfo.cols.info = "Reliable packet."
+ elseif dp[2] == "2" then
+  pinfo.cols.info = "Acknowledgement packet for '"..dp[6].."'"
+ end
+ if dp[6] == "openstream" then
+  local t = {addresses = {}, iport = dp[5]}
+  t.addresses[dp[3]] = true
+  t.addresses[dp[4]] = true
+  t.id = conversationPackets[dp[1]] or #conversations+1
+  print("Conversation started by "..dp[4].." talking to "..dp[3].." on port "..tostring(dp[5]))
+  conversations[t.id] = t
+  subtree:add(conv, t.id):set_generated()
+  subtree:add(cport, t.iport):set_generated()
+  conversationPackets[dp[1]] = t.id
+ end
+ for k,v in pairs(conversations) do
+  if not v.port and v.iport == dp[5] and tonumber(dp[6]) and v.addresses[dp[3]] and v.addresses[dp[4]] then
+   v.port = tostring(tonumber(dp[6]))
+   print(string.format("Conversation %d port set to %d",k,v.port))
+   subtree:add(conv, v.id):set_generated()
+   subtree:add(cport, v.iport):set_generated()
+   conversationPackets[dp[1]] = v.id
+  elseif checkConversation(dp,v) then
+   print(dp[1].." is part of "..tostring(k))
+   subtree:add(conv, v.id):set_generated()
+   subtree:add(cport, v.iport):set_generated()
+   conversationPackets[dp[1]] = v.id
+  end
+ end
+end

vTunnel/Wireshark/interminitel.lua

@@ -0,0 +1,66 @@
+local imt = {}
+
+imt.ttypes = {}
+imt.ttypes.string=1
+imt.ttypes.number=2
+
+imt.ftypes = {tostring,tonumber}
+
+function imt.to16bn(n)
+ return string.char(math.floor(n/256))..string.char(math.floor(n%256))
+end
+function imt.from16bn(s)
+ return (string.byte(s,1,1)*256)+string.byte(s,2,2)
+end
+
+function imt.encodePacket(...)
+ local tArgs = {...}
+ local packet = string.char(#tArgs%256)
+ for _,segment in ipairs(tArgs) do
+  local segtype = type(segment)
+  segment = tostring(segment)
+  packet = packet .. imt.to16bn(segment:len()) .. string.char(imt.ttypes[segtype]) .. tostring(segment)
+ end
+ packet = imt.to16bn(packet:len()) .. packet
+ return packet
+end
+
+function imt.decodePacket(s)
+ local count=0
+ local function getfirst(n)
+  local ns = s:sub(1,n)
+  s=s:sub(n+1)
+  count=count+n
+  return ns
+ end
+ if s:len() < 2 then return false end
+ local plen = imt.from16bn(getfirst(2))
+ local segments, starts = {}, {}
+ if s:len() < plen then return false end
+ local nsegments = string.byte(getfirst(1))
+-- print(tostring(plen).." bytes, "..tostring(nsegments).." segments")
+ for i = 1, nsegments do
+  starts[#starts+1] = count+3
+  local seglen = imt.from16bn(getfirst(2))
+  local segtype = imt.ftypes[string.byte(getfirst(1))]
+  local segment = getfirst(seglen)
+--  print(seglen,segtype,segment,type(segment))
+  segments[#segments+1] = segment
+ end
+ return segments, starts
+end
+function imt.getRemainder(s)
+ local function getfirst(n)
+  local ns = s:sub(1,n)
+  s=s:sub(n+1)
+  return ns
+ end
+ local plen = imt.from16bn(getfirst(2))
+ if s:len() > plen then
+  getfirst(plen)
+  return s
+ end
+ return nil
+end
+
+return imt

vTunnel/bridge.lua

@@ -1,9 +1,10 @@
 local socket = require "socket"
 local imt = require "interminitel"
+local pcap = require "pcap"
 
 local tArgs = {...}
 
-local port, timeout = tonumber(tArgs[1]) or 4096, tonumber(tArgs[2]) or 60
+local port, timeout, pf = tonumber(tArgs[1]) or 4096, tonumber(tArgs[2]) or 60, tArgs[3]
 
 local clients, coroutines, messages = {}, {}, {}
 
@@ -96,8 +97,18 @@ function pushLoop()
   for id,msg in pairs(messages) do
    if msg[1]:len() > 3 then
     for k,client in pairs(clients) do
+     if k ~= msg[2] then
       client.conn:send(msg[1])
-     reprint("Message #"..tostring(id).." (Client #"..tostring(msg[2]).." -> Client #"..tostring(k).." - "..msg[1])
+      reprint("Message #"..tostring(id).." (Client #"..tostring(msg[2]).." -> Client #"..tostring(k)..") - "..msg[1])
+     end
+    end
+    if pf then
+     local f=io.open(pf,"ab")
+     if f then
+      f:write(pcap.packet(msg[1]))
+      print(pcap.packet(msg[1]))
+      f:close()
+     end
     end
    end
    messages[id] = nil
@@ -124,6 +135,16 @@ end
 
 spawn(bufferLoop)
 
+if pf then
+ local f=io.open(pf,"wb")
+ if f then
+  f:write(pcap.header())
+  f:close()
+ else
+  pf=nil
+ end
+end
+
 while #coroutines > 0 do
  for k,v in pairs(coroutines) do
   coroutine.resume(v)

vTunnel/pcap.lua

@@ -0,0 +1,35 @@
+local pcap = {}
+local function uint32(n)
+ s = ""
+ for i = 3, 0, -1 do
+  s=s..string.char((n>>(8*i))%256)
+ end
+ return s
+end
+local function uint16(n)
+ s = ""
+ for i = 1, 0, -1 do
+  s=s..string.char((n>>(8*i))%256)
+ end
+ return s
+end
+
+function pcap.header(type)
+ local s=uint32(0xa1b2c3d4) -- magic number
+ s=s..uint16(2) -- major version
+ s=s..uint16(4) -- minor version
+ s=s..uint32(0) -- timezone
+ s=s..uint32(0) -- accuracy
+ s=s..uint32(2^16) -- snaplen
+ s=s..uint32(type or 147)
+ return s
+end
+function pcap.packet(d)
+ local s = uint32(os.time()) -- timestamp
+ s=s..uint32(0) -- usec
+ s=s..uint32(d:len()) -- included length
+ s=s..uint32(d:len()) -- actual length
+ return s..d
+end
+
+return pcap