mirror of
https://github.com/hsoft/collapseos.git
synced 2024-12-05 06:18:06 +11:00
145b48efb7
A new app to stress test the SD card driver. Also, accompanying this commit, changes solidifying the SD card driver so that stress tests actually pass :)
633 lines
16 KiB
NASM
633 lines
16 KiB
NASM
; sdc
|
|
;
|
|
; Manages the initialization of a SD card and implement a block device to read
|
|
; and write from/to it, in SPI mode.
|
|
;
|
|
; Note that SPI can't really be used directly from the z80, so this part
|
|
; assumes that you have a device that handles SPI communication on behalf of
|
|
; the z80. This device is assumed to work in a particular way. See the
|
|
; "rc2014/sdcard" recipe for details.
|
|
;
|
|
; That device has 3 ports. One write-only port to make CS high, one to make CS
|
|
; low (data sent is irrelevant), and one read/write port to send and receive
|
|
; bytes with the card through the SPI protocol. The device acts as a SPI master
|
|
; and writing to that port initiates a byte exchange. Data from the slave is
|
|
; then placed on a buffer that can be read by reading the same port.
|
|
;
|
|
; It's through that kind of device that this code below is supposed to work.
|
|
;
|
|
; *** SDC buffers ***
|
|
;
|
|
; SD card's lowest common denominator in terms of block size is 512 bytes, so
|
|
; that's what we deal with. To avoid wastefully reading entire blocks from the
|
|
; card for one byte read ops, we buffer the last read block. If a GetC or PutC
|
|
; operation is within that buffer, then no interaction with the SD card is
|
|
; necessary.
|
|
;
|
|
; As soon as a GetC or PutC operation is made that is outside the current
|
|
; buffer, we load a new block.
|
|
;
|
|
; When we PutC, we flag the buffer as "dirty". On the next buffer change (during
|
|
; an out-of-buffer request or during an explicit "flush" operation), bytes
|
|
; currently in the buffer will be written to the SD card.
|
|
;
|
|
; We hold 2 buffers in memory, each targeting a different sector and with its
|
|
; own dirty flag. We do that to avoid wasteful block writing in the case where
|
|
; we read data from a file in the SD card, process it and write the result
|
|
; right away, in another file on the same card (zasm), on a different sector.
|
|
;
|
|
; If we only have one buffer in this scenario, we'll end up loading a new sector
|
|
; at each GetC/PutC operation and, more importantly, writing a whole block for
|
|
; a few bytes each time. This will wear the card prematurely (and be very slow).
|
|
;
|
|
; With 2 buffers, we solve the problem. Whenever GetC/PutC is called, we first
|
|
; look if one of the buffer holds our sector. If not, we see if one of the
|
|
; buffer is clean (not dirty). If yes, we use this one. If both are dirty or
|
|
; clean, we use any. This way, as long as writing isn't made to random
|
|
; addresses, we ensure that we don't write wastefully because read operations,
|
|
; even if random, will always use the one buffer that isn't dirty.
|
|
|
|
; *** Defines ***
|
|
; SDC_PORT_CSHIGH: Port number to make CS high
|
|
; SDC_PORT_CSLOW: Port number to make CS low
|
|
; SDC_PORT_SPI: Port number to send/receive SPI data
|
|
|
|
; *** Consts ***
|
|
.equ SDC_BLKSIZE 512
|
|
|
|
; *** Variables ***
|
|
; This is a pointer to the currently selected buffer. This points to the BUFSEC
|
|
; part, that is, two bytes before actual content begins.
|
|
.equ SDC_BUFPTR SDC_RAMSTART
|
|
; Sector number currently in SDC_BUF1.
|
|
.equ SDC_BUFSEC1 SDC_BUFPTR+2
|
|
; Whether the buffer has been written to. 0 means clean. 1 means dirty.
|
|
.equ SDC_BUFDIRTY1 SDC_BUFSEC1+1
|
|
; The contents of the buffer.
|
|
.equ SDC_BUF1 SDC_BUFDIRTY1+1
|
|
|
|
; second buffer has the same structure as the first.
|
|
.equ SDC_BUFSEC2 SDC_BUF1+SDC_BLKSIZE
|
|
.equ SDC_BUFDIRTY2 SDC_BUFSEC2+1
|
|
.equ SDC_BUF2 SDC_BUFDIRTY2+1
|
|
.equ SDC_RAMEND SDC_BUF2+SDC_BLKSIZE
|
|
|
|
; *** Code ***
|
|
; Wake the SD card up. After power up, a SD card has to receive at least 74
|
|
; dummy clocks with CS and DI high. We send 80.
|
|
sdcWakeUp:
|
|
out (SDC_PORT_CSHIGH), a
|
|
ld b, 10 ; 10 * 8 == 80
|
|
ld a, 0xff
|
|
.loop:
|
|
out (SDC_PORT_SPI), a
|
|
nop
|
|
djnz .loop
|
|
ret
|
|
|
|
; Initiate SPI exchange with the SD card. A is the data to send. Received data
|
|
; is placed in A.
|
|
sdcSendRecv:
|
|
out (SDC_PORT_SPI), a
|
|
nop
|
|
nop
|
|
in a, (SDC_PORT_SPI)
|
|
nop
|
|
nop
|
|
ret
|
|
|
|
sdcIdle:
|
|
ld a, 0xff
|
|
jp sdcSendRecv
|
|
|
|
; sdcSendRecv 0xff until the response is something else than 0xff for a maximum
|
|
; of 20 times. Returns 0xff if no response.
|
|
sdcWaitResp:
|
|
push bc
|
|
ld b, 20
|
|
.loop:
|
|
call sdcIdle
|
|
inc a ; if 0xff, it's going to become zero
|
|
jr nz, .end ; not zero? good, that's our command
|
|
djnz .loop
|
|
.end:
|
|
; whether we had a success or failure, we return the result.
|
|
; But first, let's bring it back to its original value.
|
|
dec a
|
|
pop bc
|
|
ret
|
|
|
|
; The opposite of sdcWaitResp: we wait until response if 0xff. After a
|
|
; successful read or write operation, the card will be busy for a while. We need
|
|
; to give it time before interacting with it again. Technically, we could
|
|
; continue processing on our side while the card it busy, and maybe we will one
|
|
; day, but at the moment, I'm having random write errors if I don't do this
|
|
; right after a write, so I prefer to stay cautious for now.
|
|
; This has no error condition and preserves A
|
|
sdcWaitReady:
|
|
push af
|
|
; for now, we have no timeout for waiting. It means that broken SD
|
|
; cards can cause infinite loops.
|
|
.loop:
|
|
call sdcIdle
|
|
inc a ; if 0xff, it's going to become zero
|
|
jr nz, .loop ; not zero? still busy. loop
|
|
pop af
|
|
ret
|
|
|
|
; Sends a command to the SD card, along with arguments and specified CRC fields.
|
|
; (CRC is only needed in initial commands though).
|
|
; A: Command to send
|
|
; H: Arg 1 (MSB)
|
|
; L: Arg 2
|
|
; D: Arg 3
|
|
; E: Arg 4 (LSB)
|
|
; C: CRC
|
|
;
|
|
; Returns R1 response in A.
|
|
;
|
|
; This does *not* handle CS. You have to select/deselect the card outside this
|
|
; routine.
|
|
sdcCmd:
|
|
; Wait until ready to receive commands
|
|
push af
|
|
call sdcWaitResp
|
|
pop af
|
|
|
|
call sdcSendRecv
|
|
; Arguments
|
|
ld a, h
|
|
call sdcSendRecv
|
|
ld a, l
|
|
call sdcSendRecv
|
|
ld a, d
|
|
call sdcSendRecv
|
|
ld a, e
|
|
call sdcSendRecv
|
|
; send CRC
|
|
ld a, c
|
|
; Most of the time, we don't care about C, but in all cases, we want
|
|
; the last bit to be high. It's the stop bit.
|
|
or 0x01
|
|
call sdcSendRecv
|
|
|
|
; And now we just have to wait for a valid response...
|
|
jp sdcWaitResp ; return
|
|
|
|
; Send a command that expects a R1 response, handling CS.
|
|
sdcCmdR1:
|
|
out (SDC_PORT_CSLOW), a
|
|
call sdcCmd
|
|
out (SDC_PORT_CSHIGH), a
|
|
ret
|
|
|
|
; Send a command that expects a R7 response, handling CS. A R7 is a R1 followed
|
|
; by 4 bytes. Those 4 bytes are returned in HL/DE in the same order as in
|
|
; sdcCmd.
|
|
sdcCmdR7:
|
|
out (SDC_PORT_CSLOW), a
|
|
call sdcCmd
|
|
|
|
; We have our R1 response in A. Let's try reading the next 4 bytes in
|
|
; case we have a R3.
|
|
push af
|
|
ld a, 0xff
|
|
call sdcSendRecv
|
|
ld h, a
|
|
ld a, 0xff
|
|
call sdcSendRecv
|
|
ld l, a
|
|
ld a, 0xff
|
|
call sdcSendRecv
|
|
ld d, a
|
|
ld a, 0xff
|
|
call sdcSendRecv
|
|
ld e, a
|
|
pop af
|
|
|
|
out (SDC_PORT_CSHIGH), a
|
|
ret
|
|
|
|
; Initialize a SD card. This should be called at least 1ms after the powering
|
|
; up of the card. Sets result code in A. Zero means success, non-zero means
|
|
; error.
|
|
sdcInitialize:
|
|
push hl
|
|
push de
|
|
push bc
|
|
call sdcWakeUp
|
|
|
|
; Call CMD0 and expect a 0x01 response (card idle)
|
|
; This should be called multiple times. We're actually expected to.
|
|
; Let's call this for a maximum of 10 times.
|
|
ld b, 10
|
|
.loop1:
|
|
ld a, 0b01000000 ; CMD0
|
|
ld hl, 0
|
|
ld de, 0
|
|
ld c, 0x95
|
|
call sdcCmdR1
|
|
cp 0x01
|
|
jp z, .cmd0ok
|
|
djnz .loop1
|
|
; Nothing? error
|
|
jr .error
|
|
.cmd0ok:
|
|
|
|
; Then comes the CMD8. We send it with a 0x01aa argument and expect
|
|
; a 0x01aa argument back, along with a 0x01 R1 response.
|
|
ld a, 0b01001000 ; CMD8
|
|
ld hl, 0
|
|
ld de, 0x01aa
|
|
ld c, 0x87
|
|
call sdcCmdR7
|
|
cp 0x01
|
|
jr nz, .error
|
|
xor a
|
|
cp h ; H is zero
|
|
jr nz, .error
|
|
cp l ; L is zero
|
|
jr nz, .error
|
|
ld a, d
|
|
cp 0x01
|
|
jp nz, .error
|
|
ld a, e
|
|
cp 0xaa
|
|
jr nz, .error
|
|
|
|
; Now we need to repeatedly run CMD55+CMD41 (0x40000000) until we
|
|
; the card goes out of idle mode, that is, when it stops sending us
|
|
; 0x01 response and send us 0x00 instead. Any other response means that
|
|
; initialization failed.
|
|
.loop2:
|
|
ld a, 0b01110111 ; CMD55
|
|
ld hl, 0
|
|
ld de, 0
|
|
call sdcCmdR1
|
|
cp 0x01
|
|
jr nz, .error
|
|
ld a, 0b01101001 ; CMD41 (0x40000000)
|
|
ld hl, 0x4000
|
|
ld de, 0x0000
|
|
call sdcCmdR1
|
|
cp 0x01
|
|
jr z, .loop2
|
|
or a ; cp 0
|
|
jr nz, .error
|
|
; Success! out of idle mode!
|
|
jr .end
|
|
|
|
.error:
|
|
ld a, 0x01
|
|
.end:
|
|
pop bc
|
|
pop de
|
|
pop hl
|
|
ret
|
|
|
|
; Send a command to set block size to SDC_BLKSIZE to the SD card.
|
|
; Returns zero in A if a success, non-zero otherwise
|
|
sdcSetBlkSize:
|
|
push hl
|
|
push de
|
|
|
|
ld a, 0b01010000 ; CMD16
|
|
ld hl, 0
|
|
ld de, SDC_BLKSIZE
|
|
call sdcCmdR1
|
|
; Since we're out of idle mode, we expect a 0 response
|
|
; We need no further processing: A is already the correct value.
|
|
pop de
|
|
pop hl
|
|
ret
|
|
|
|
; Read block index specified in A and place the contents in buffer pointed to
|
|
; by (SDC_BUFPTR).
|
|
; Doesn't check CRC. If the operation is a success, updates buffer's sector to
|
|
; the value of A.
|
|
; Returns 0 in A if success, non-zero if error.
|
|
sdcReadBlk:
|
|
push bc
|
|
push de
|
|
push hl
|
|
|
|
out (SDC_PORT_CSLOW), a
|
|
ld hl, 0 ; read single block at addr A
|
|
ld d, 0
|
|
ld e, a ; E isn't touched in the rest of the routine
|
|
; and holds onto our original A
|
|
ld a, 0b01010001 ; CMD17
|
|
call sdcCmd
|
|
or a ; cp 0
|
|
jr nz, .error
|
|
|
|
; Command sent, no error, now let's wait for our data response.
|
|
ld b, 20
|
|
.loop1:
|
|
call sdcWaitResp
|
|
; 0xfe is the expected data token for CMD17
|
|
cp 0xfe
|
|
jr z, .loop1end
|
|
cp 0xff
|
|
jr nz, .error
|
|
djnz .loop1
|
|
jr .error ; timeout. error out
|
|
.loop1end:
|
|
; We received our data token!
|
|
; Data packets follow immediately, we have 512 of them to read
|
|
ld bc, SDC_BLKSIZE
|
|
ld hl, (SDC_BUFPTR) ; HL --> active buffer's sector
|
|
; It sounds a bit wrong to set bufsec and dirty flag before we get our
|
|
; actual data, but at this point, we don't have any error conditions
|
|
; left, success is guaranteed. To avoid needlesssly INCing hl, let's
|
|
; set sector and dirty along the way
|
|
ld a, e ; sector number
|
|
ld (hl), a
|
|
inc hl ; dirty flag
|
|
xor a ; unset
|
|
ld (hl), a
|
|
inc hl ; actual contents
|
|
.loop2:
|
|
call sdcIdle
|
|
ld (hl), a
|
|
cpi ; a trick to inc HL and dec BC at the same time.
|
|
; P/V indicates whether BC reached 0
|
|
jp pe, .loop2 ; BC is not zero, loop
|
|
; Read our 2 CRC bytes
|
|
call sdcIdle
|
|
call sdcIdle
|
|
; success! wait until card is ready
|
|
call sdcWaitReady
|
|
xor a ; success
|
|
jr .end
|
|
.error:
|
|
; try to preserve error code
|
|
or a ; cp 0
|
|
jr nz, .end ; already non-zero
|
|
inc a ; zero, adjust
|
|
.end:
|
|
out (SDC_PORT_CSHIGH), a
|
|
pop hl
|
|
pop de
|
|
pop bc
|
|
ret
|
|
|
|
; Write the contents of buffer where (SDC_BUFPTR) points to in sector associated
|
|
; to it. Unsets the the buffer's dirty flag on success.
|
|
; A returns 0 in A on success (with Z set), non-zero (with Z unset) on error.
|
|
sdcWriteBlk:
|
|
push hl
|
|
ld hl, (SDC_BUFPTR) ; HL points to sector
|
|
inc hl ; now to dirty flag
|
|
xor a
|
|
cp (hl)
|
|
jr z, .dontWrite ; A is already 0
|
|
|
|
; At this point, HL points to dirty flag of the proper buffer
|
|
|
|
push bc
|
|
push de
|
|
|
|
out (SDC_PORT_CSLOW), a
|
|
dec hl ; sector
|
|
ld a, (hl)
|
|
ld hl, 0 ; write single block at addr A
|
|
ld d, 0
|
|
ld e, a
|
|
ld a, 0b01011000 ; CMD24
|
|
call sdcCmd
|
|
or a ; cp 0
|
|
jr nz, .error
|
|
|
|
; Before sending the data packet, we need to send at least one empty
|
|
; byte.
|
|
ld a, 0xff
|
|
call sdcSendRecv
|
|
|
|
; data packet token for CMD24
|
|
ld a, 0xfe
|
|
call sdcSendRecv
|
|
|
|
; Sending our data token!
|
|
ld bc, SDC_BLKSIZE
|
|
ld hl, (SDC_BUFPTR)
|
|
inc hl ; dirty flag
|
|
inc hl ; beginning of contents
|
|
|
|
.loop:
|
|
ld a, (hl)
|
|
call sdcSendRecv
|
|
cpi ; a trick to inc HL and dec BC at the same time.
|
|
; P/V indicates whether BC reached 0
|
|
jp pe, .loop ; BC is not zero, loop
|
|
; Send our 2 CRC bytes. They can be anything
|
|
call sdcIdle
|
|
call sdcIdle
|
|
; Let's see what response we have
|
|
call sdcWaitResp
|
|
and 0b00011111 ; We ignore the first 3 bits of the response.
|
|
cp 0b00000101 ; A valid response is "010" in bits 3:1 flanked
|
|
; by 0 on its left and 1 on its right.
|
|
jr nz, .error
|
|
; good! Now, we need to let the card process this data. It will return
|
|
; 0xff when it's not busy any more.
|
|
call sdcWaitResp
|
|
; Success! Now let's unset the dirty flag
|
|
ld hl, (SDC_BUFPTR)
|
|
inc hl ; dirty flag
|
|
xor a
|
|
ld (hl), a
|
|
|
|
; Before returning, wait until card is ready
|
|
call sdcWaitReady
|
|
xor a
|
|
; A is already 0
|
|
jr .end
|
|
.error:
|
|
; try to preserve error code
|
|
or a ; cp 0
|
|
jr nz, .end ; already non-zero
|
|
inc a ; zero, adjust
|
|
.end:
|
|
out (SDC_PORT_CSHIGH), a
|
|
pop de
|
|
pop bc
|
|
.dontWrite:
|
|
pop hl
|
|
ret
|
|
|
|
; Considering the first 7 bits of HL, select the most appropriate of our two
|
|
; buffers and, if necessary, sync that buffer with the SD card. If the selected
|
|
; buffer doesn't have the same sector as what HL asks, load that buffer from
|
|
; the SD card.
|
|
; If the dirty flag is set, we write the content of the in-memory buffer to the
|
|
; SD card before we read a new sector.
|
|
; Returns Z on success, not-Z on error (with the error code from either
|
|
; sdcReadBlk or sdcWriteBlk)
|
|
sdcSync:
|
|
; HL points to the character we're supposed to read or right now. Let's
|
|
; extract the wanted sector from this.
|
|
ld a, h
|
|
srl a ; A --> the requested sector number
|
|
push hl ; Save the requested addr for later
|
|
ld l, a
|
|
; Let's first see if our first buffer has our sector
|
|
ld a, (SDC_BUFSEC1)
|
|
cp l
|
|
jr z, .buf1Ok
|
|
|
|
; Ok, let's check for buf2 then
|
|
ld a, (SDC_BUFSEC2)
|
|
cp l
|
|
jr z, .buf2Ok
|
|
|
|
; None of our two buffers have the sector we need, we'll need to load
|
|
; a new one.
|
|
|
|
; We select our buffer depending on which is dirty. If both are on the
|
|
; same status of dirtiness, we pick any (the first in our case). If one
|
|
; of them is dirty, we pick the clean one.
|
|
ld hl, SDC_BUFSEC1
|
|
ld a, (SDC_BUFDIRTY1)
|
|
or a ; is buf1 dirty?
|
|
jr z, .ready ; no? good, that's our buffer
|
|
; yes? then buf2 is our buffer.
|
|
ld hl, SDC_BUFSEC2
|
|
|
|
.ready:
|
|
; At this point, HL points to one of our two buffers, the good one.
|
|
; Let's save it to SDC_BUFPTR
|
|
ld (SDC_BUFPTR), hl
|
|
|
|
; You remember that HL we saved a long time ago? Now's the time to
|
|
; bring it back.
|
|
pop hl
|
|
|
|
; We have to read a new sector, but first, let's write the current one
|
|
; if needed.
|
|
call sdcWriteBlk
|
|
ret nz ; error
|
|
; Let's read our new sector
|
|
ld a, h
|
|
srl a
|
|
jp sdcReadBlk ; returns
|
|
|
|
.buf1Ok:
|
|
ld hl, SDC_BUFSEC1
|
|
ld (SDC_BUFPTR), hl
|
|
pop hl
|
|
ret
|
|
|
|
.buf2Ok:
|
|
ld hl, SDC_BUFSEC2
|
|
ld (SDC_BUFPTR), hl
|
|
pop hl
|
|
ret
|
|
|
|
; *** shell cmds ***
|
|
|
|
sdcInitializeCmd:
|
|
.db "sdci", 0, 0, 0
|
|
call sdcInitialize
|
|
ret nz
|
|
call sdcSetBlkSize
|
|
ret nz
|
|
; At this point, our buffers are unnitialized. We could have some logic
|
|
; that determines whether a buffer is initialized in appropriate SDC
|
|
; routines and act appropriately, but why bother when we could, instead,
|
|
; just buffer the first two sectors of the card on initialization? This
|
|
; way, no need for special conditions.
|
|
; initialize variables
|
|
ld hl, SDC_BUFSEC1
|
|
xor a
|
|
ld (SDC_BUFPTR), hl
|
|
call sdcReadBlk ; read sector 0 in buf1
|
|
ld hl, SDC_BUFSEC2
|
|
inc a
|
|
ld (SDC_BUFPTR), hl
|
|
jp sdcReadBlk ; read sector 1 in buf2, returns
|
|
|
|
; Flush the current SDC buffer if dirty
|
|
sdcFlushCmd:
|
|
.db "sdcf", 0, 0, 0
|
|
ld hl, SDC_BUFSEC1
|
|
ld (SDC_BUFPTR), hl
|
|
call sdcWriteBlk
|
|
ret nz
|
|
ld hl, SDC_BUFSEC2
|
|
ld (SDC_BUFPTR), hl
|
|
jp sdcWriteBlk ; returns
|
|
|
|
; *** blkdev routines ***
|
|
|
|
; Make HL point to its proper place in SDC_BUF.
|
|
; HL currently is an offset to read in the SD card. Load the proper sector in
|
|
; memory and make HL point to the correct data in the memory buffer.
|
|
_sdcPlaceBuf:
|
|
call sdcSync
|
|
ret nz ; error
|
|
push de
|
|
ld de, (SDC_BUFPTR)
|
|
inc de ; dirty flag
|
|
inc de ; contents
|
|
ld a, h ; high byte
|
|
and 0x01 ; is first bit set?
|
|
jr z, .read ; first bit reset? we're in the "lowbuf" zone.
|
|
; DE already points to the right place.
|
|
; We're in the highbuf zone, let's inc DE by 0x100, which, as it turns
|
|
; out, is quite easy.
|
|
inc d
|
|
.read:
|
|
; DE is now placed either on the lower or higher half of the active
|
|
; buffer and all we need is to increase DE the lower half of HL.
|
|
ld a, l
|
|
call addDE
|
|
ex de, hl
|
|
pop de
|
|
; Now, HL points exactly at the right byte in the active buffer.
|
|
xor a ; ensure Z
|
|
ret
|
|
|
|
sdcGetC:
|
|
push hl
|
|
call _sdcPlaceBuf
|
|
jr nz, .error
|
|
|
|
; This is it!
|
|
ld a, (hl)
|
|
cp a ; ensure Z
|
|
jr .end
|
|
.error:
|
|
call unsetZ
|
|
.end:
|
|
pop hl
|
|
ret
|
|
|
|
sdcPutC:
|
|
push hl
|
|
push af ; let's remember the char we put, _sdcPlaceBuf
|
|
; destroys A.
|
|
call _sdcPlaceBuf
|
|
jr nz, .error
|
|
|
|
; HL points to our dest. Recall A and write
|
|
pop af
|
|
ld (hl), a
|
|
|
|
; Now, let's set the dirty flag
|
|
ld a, 1
|
|
ld hl, (SDC_BUFPTR)
|
|
inc hl ; point to dirty flag
|
|
ld (hl), a ; set dirty flag
|
|
xor a ; ensure Z
|
|
jr .end
|
|
.error:
|
|
; preserve error code
|
|
ex af, af'
|
|
pop af
|
|
ex af, af'
|
|
call unsetZ
|
|
.end:
|
|
pop hl
|
|
ret
|