blk/081

@@ -1,16 +1,17 @@
-RAMSTART  FUTURE USES          +3c       BLK(*
+RAMSTART  FUTURE USES          +55       (key) override
-+02       CURRENT              +3e       FUTURE USES
++02       CURRENT              +57       readln's variables
-+04       HERE                 
++04       HERE                 +59       blk's variables
-+06       C<?                  +51       CURRENTPTR
++06       C<?                  +5b       z80a's variables
-+08       C<* override         +53       (emit) override
++08       C<* override         +5d       adev's variables
-+0a       NLPTR                +55       (key) override
++0a       NLPTR                +5f       FUTURE USES
-+0c       C<*                  +57       FUTURE USES
++0c       C<*                  +70       DRIVERS
-+0e       WORDBUF              
++0e       WORDBUF              +80       RAMEND
-+2e       BOOT C< PTR          +5d       adev's variables
++2e       BOOT C< PTR
-+30       IN>                  +5f       FUTURE USES
++30       FUTURE USES
-+32       IN(*                 +70       DRIVERS
++4e       INTJUMP
-+34       BLK@*                +80       RAMEND
++51       CURRENTPTR
-+36       BLK!*
++53       (emit) override
-+38       BLK>
+
-+3a       BLKDTY
+
+
                                                         (cont.)

blk/082

@@ -9,8 +9,8 @@ PARSEPTR holds routine address called on (parse)
 C<* holds routine address called on C<. If the C<* override
 at 0x08 is nonzero, this routine is called instead.
 
-IN> is the current position in IN(, which is the input buffer.
 
-IN(* is a pointer to the input buffer, allocated at runtime.
+
+
 
                                                         (cont.)

blk/083

@@ -7,10 +7,10 @@ WORDBUF is the buffer used by WORD
 BOOT C< PTR is used when Forth boots from in-memory
 source. See "Initialization sequence" below.
 
-
+INTJUMP All RST offsets (well, not *all* at this moment, I
-
+still have to free those slots...) in boot binaries are made to
-
+jump to this address. If you use one of those slots for an
-
+interrupt, write a jump to the appropriate offset in that RAM
-
+location.
 
                                                         (cont.)

blk/084

@@ -7,9 +7,10 @@ for example), it can point elsewhere.
 NLPTR points to an alternative routine for NL (by default,
 CRLF).
 
-BLK* see B416.
-
 FUTURE USES section is unused for now.          
 
-DRIVERS section is reserved for recipe-specific drivers.
+DRIVERS section is reserved for recipe-specific
+drivers. Here is a list of known usages:
+
+* 0x70-0x78: ACIA buffer pointers in RC2014 recipes.
 

blk/212

@@ -1 +1,2 @@
-1 37 LOADR+
+1 LOAD+ Z80A$
+3 37 LOADR+

blk/213

@@ -1,6 +1,9 @@
-VARIABLE ORG
+: Z80AMEM+ 0x5b RAM+ @ + ;
-VARIABLE BIN( 0 BIN( !
+: ORG 0 Z80AMEM+ ;
-VARIABLE L1 VARIABLE L2 VARIABLE L3 VARIABLE L4
+: BIN( 2 Z80AMEM+ ;
+: L1 4 Z80AMEM+ ; : L2 6 Z80AMEM+ ;
+: L3 8 Z80AMEM+ ; : L4 10 Z80AMEM+ ;
+: Z80A$ H@ 0x5b RAM+ ! 12 ALLOT 0 BIN( ! ;
 : A 7 ; : B 0 ; : C 1 ; : D 2 ;
 : E 3 ; : H 4 ; : L 5 ; : (HL) 6 ;
 : BC 0 ; : DE 1 ; : HL 2 ; : AF 3 ; : SP AF ;

blk/283

@@ -8,8 +8,8 @@ EXDEHL, JP(HL), NOP, ( 17, nativeWord )
 0 JPnn,       ( 1a, next )     0 JPnn,       ( 1d, chkPS )
 NOP, NOP,   ( 20, numberWord ) NOP, NOP,     ( 22, litWord )
 NOP, NOP,     ( 24, addrWord ) NOP, NOP,     ( 26, unused )
-0 JPnn,       ( RST 28 )
+RAMSTART 0x4e + JPnn, ( 28, RST 28 )
 0 JPnn,       ( 2b, doesWord ) NOP, NOP,     ( 2e, unused )
-0 JPnn,       ( RST 30 )
+RAMSTART 0x4e + JPnn, ( RST 30 )
 0 JPnn,       ( 33, execute )  NOP, NOP,     ( unused )
-0 JPnn,       ( RST 38 )
+RAMSTART 0x4e + JPnn, ( RST 38 )

blk/416

@@ -1,12 +1,13 @@
+: BLKMEM+ 0x59 RAM+ @ + ;
 ( n -- Fetches block n and write it to BLK( )
-: BLK@* 0x34 RAM+ ;
+: BLK@* 0 BLKMEM+ ;
 ( n -- Write back BLK( to storage at block n )
-: BLK!* 0x36 RAM+ ;
+: BLK!* 2 BLKMEM+ ;
 ( Current blk pointer in ( )
-: BLK> 0x38 RAM+ ;
+: BLK> 4 BLKMEM+ ;
 ( Whether buffer is dirty )
-: BLKDTY 0x3a RAM+ ;
+: BLKDTY 6 BLKMEM+ ;
-: BLK( 0x3c RAM+ @ ;
+: BLK( 8 BLKMEM+ ;
 : BLK) BLK( 1024 + ;
 
 

blk/417

@@ -1,6 +1,7 @@
 : BLK$
-    H@ 0x3c ( BLK(* ) RAM+ !
+    H@ 0x59 RAM+ !
-    1024 ALLOT
+    ( 1024 for the block, 8 for variables )
+    1032 ALLOT
     ( LOAD detects end of block with ASCII EOT. This is why
       we write it there. EOT == 0x04 )
     4 C,

blk/426

@@ -1,9 +1,10 @@
+: RDLNMEM+ 0x57 RAM+ @ + ;
 ( current position in INBUF )
-: IN> 0x30 RAM+ ;
+: IN> 0 RDLNMEM+ ;
 ( points to INBUF )
-: IN( 0x32 RAM+ @ ;
+: IN( 2 RDLNMEM+ ;
 ( points to INBUF's end )
-: IN) 0x40 ( buffer size ) IN( + ;
+: IN) 0x40 ( buffer size ) 2+ RDLNMEM+ ;
 
 ( flush input buffer )
 ( set IN> to IN( and set IN> @ to null )

blk/430

@@ -1,9 +1,10 @@
 ( Initializes the readln subsystem )
 : RDLN$
-    H@ 0x32 ( IN(* ) RAM+ !
+    ( 57 == rdln's memory )
+    H@ 0x57 RAM+ !
     ( plus 2 for extra bytes after buffer: 1 for
       the last typed 0x0a and one for the following NULL. )
-    IN) IN( - ALLOT
+    IN) IN> - 2+ ALLOT
     (infl)
     ['] RDLN< 0x0c RAM+ !
     1 0x06 RAM+ !  ( 06 == C<? )

blk/583

@@ -1,4 +1,4 @@
-(entry) ~ACIA ( Set RST 38 jump ) PC ORG @ 0x39 + !
+CREATE ~ACIA
     AF PUSHqq,
     HL PUSHqq,
     DE PUSHqq,

blk/585

@@ -13,3 +13,5 @@
     EI,
     RETI,
 
+
+

blk/588

@@ -9,5 +9,8 @@
   CR4:2 (101) - 8 bits + 1 stop bit
   CR1:0 (10) - Counter divide: 64 )
     0b10010110 [ ACIA_CTL LITN ] PC!
+( setup interrupt )
+    0xc3 0x4e RAM+ C!  ( c3==JP, 4e==INTJUMP )
+    ~ACIA 0x4f RAM+ !
     (im1) ;
 

blk/618

@@ -1,5 +1,5 @@
 0x8000 CONSTANT RAMSTART
-0xff00 CONSTANT RS_ADDR        0xfffa CONSTANT PS_ADDR
+0xf000 CONSTANT RS_ADDR        0xfffa CONSTANT PS_ADDR
 0x80   CONSTANT ACIA_CTL       0x81   CONSTANT ACIA_IO
 4      CONSTANT SDC_SPI
 5      CONSTANT SDC_CSLOW      6      CONSTANT SDC_CSHIGH

emul/emul.c

@@ -53,7 +53,6 @@ Machine* emul_init()
     memset(m.mem, 0, 0x10000);
     m.ramstart = 0;
     m.minsp = 0xffff;
-    m.maxix = 0;
     for (int i=0; i<0x100; i++) {
         m.iord[i] = NULL;
         m.iowr[i] = NULL;
@@ -75,9 +74,6 @@ bool emul_step()
         if (newsp != 0 && newsp < m.minsp) {
             m.minsp = newsp;
         }
-        if (m.cpu.R1.wr.IX > m.maxix) {
-            m.maxix = m.cpu.R1.wr.IX;
-        }
         return true;
     } else {
         return false;
@@ -120,5 +116,4 @@ void emul_memdump()
 void emul_printdebug()
 {
     fprintf(stderr, "Min SP: %04x\n", m.minsp);
-    fprintf(stderr, "Max IX: %04x\n", m.maxix);
 }

emul/emul.h

@@ -14,8 +14,6 @@ typedef struct {
     ushort ramstart;
     // The minimum value reached by SP at any point during execution.
     ushort minsp;
-    // same principle for IX
-    ushort maxix;
     // Array of 0x100 function pointers to IO read and write routines. Leave to
     // NULL when IO port is unhandled.
     IORD iord[0x100];

emul/stage.c

@@ -20,6 +20,11 @@ trouble of compiling defs to binary.
 
 */
 
+// When DEBUG is set, stage1 is a core-less forth that works interactively.
+// Useful for... debugging!
+// By the way: there's a double-echo in stagedbg. It's normal. Don't panic.
+
+//#define DEBUG
 #define RAMSTART 0
 #define STDIO_PORT 0x00
 // To know which part of RAM to dump, we listen to port 2, which at the end of
@@ -51,6 +56,10 @@ static uint8_t iord_stdio()
 static void iowr_stdio(uint8_t val)
 {
     // we don't output stdout in stage0
+#ifdef DEBUG
+    // ... unless we're in DEBUG mode!
+    putchar(val);
+#endif
 }
 
 static void iowr_here(uint8_t val)
@@ -92,11 +101,12 @@ int main(int argc, char *argv[])
 
     while (running && emul_step());
 
+#ifndef DEBUG
     // We're done, now let's spit dict data
     for (int i=start_here; i<end_here; i++) {
         putchar(m->mem[i]);
     }
-    emul_printdebug();
+#endif
     return 0;
 }
 

emul/xcomp.fs

@@ -1,5 +1,5 @@
 0xe800 CONSTANT RAMSTART
-0xff00 CONSTANT RS_ADDR
+0xf000 CONSTANT RS_ADDR
 0xfffa CONSTANT PS_ADDR
 212 LOAD  ( z80 assembler )
 262 LOAD  ( xcomp )

recipes/ti84/xcomp.fs

@@ -1,5 +1,5 @@
 0x8000 CONSTANT RAMSTART
-0xbf00 CONSTANT RS_ADDR
+0xb000 CONSTANT RS_ADDR
 0xbffa CONSTANT PS_ADDR
 RAMSTART 0x70 + CONSTANT LCD_MEM
 RAMSTART 0x72 + CONSTANT KBD_MEM

recipes/trs80/xcomp.fs

@@ -1,4 +1,4 @@
-0xff00 CONSTANT RS_ADDR
+0xf000 CONSTANT RS_ADDR
 0xfffa CONSTANT PS_ADDR
 RS_ADDR 0x80 - CONSTANT RAMSTART
 212 LOAD  ( z80 assembler )

runtests.sh

@@ -1,4 +1,4 @@
-#!/bin/sh -e
+#/bin/sh -e
 
 git submodule init
 git submodule update
@@ -7,8 +7,6 @@ git clean -fxd
 make -C emul
 make -C tests
 
-# verify that forth.bin is stable
+# let's try again with an updated boot bin
-cp emul/forth.bin ref.bin
+make -C emul updatebootstrap all
-make -C emul updatebootstrap
+make -C tests
-cmp emul/forth.bin ref.bin
-rm ref.bin