Remove (sysv)

Replace its usages with direct RAM+ offsets. The (sysv) mechanism was
incompatible with cross-compilation of a full interpreter.

emul/Makefile

@@ -1,6 +1,14 @@
 TARGETS = runbin/runbin forth/forth
 BIN2C = ../tools/bin2c
 # Those Forth source files are in a particular order
+BOOTSRCS = ./forth/conf.fs \
+	../forth/xcomp.fs \
+	./forth/xcomp.fs \
+	../forth/boot.fs \
+	../forth/z80c.fs \
+	../forth/icore.fs \
+	./forth/xstop.fs
+
 FORTHSRCS = core.fs cmp.fs print.fs str.fs parse.fs readln.fs fmt.fs z80a.fs
 FORTHSRC_PATHS = ${FORTHSRCS:%=../forth/%} forth/run.fs
 OBJS = emul.o libz80/libz80.o
@@ -60,11 +68,9 @@ emul.o: emul.c
 	$(CC) -c -o emul.o emul.c
 
 
-forth/z80c.bin: forth/stage2
-	cat ./forth/conf.fs ../forth/xcomp.fs ./forth/xcomp.fs ../forth/boot.fs ../forth/z80c.fs ../forth/icore.fs | ./forth/stage2 | tee $@ > /dev/null
-
 .PHONY: updatebootstrap
-updatebootstrap: forth/z80c.bin
+updatebootstrap: forth/stage2
+	cat $(BOOTSRCS) | ./forth/stage2 > ./forth/z80c.bin
 
 .PHONY: clean
 clean:

emul/forth/xstop.fs

@@ -0,0 +1,3 @@
+(xentry) _
+H@ 256 /MOD 2 PC! 2 PC!
+

forth/core.fs

@@ -103,26 +103,6 @@
     COMPILE R> COMPILE DROP COMPILE R> COMPILE DROP
 ; IMMEDIATE
 
-( WARNING: there are no limit checks. We must be cautious, in
-  core code, not to create more than SYSV_BUFSIZE/2 sys vars.
-  Also: SYSV shouldn't be used during runtime: SYSVNXT won't
-  point at the right place. It should only be used during
-  stage1 compilation. This is why this word is not documented
-  in dictionary.txt )
-
-: (sysv)
-    ( Get new sysv addr )
-    ( RAM+46 (2e) == SYSVNXT )
-    46 RAM+ @
-    CONSTANT
-    ( increase current sysv counter )
-    2 46 RAM+ +!
-;
-
-( Set up initial SYSVNXT value, which is 2 bytes after its
-  own address )
-46 RAM+ DUP 2 + SWAP !
-
 ( a1 a2 u -- )
 : MOVE
     ( u ) 0 DO

forth/icore.fs

@@ -178,18 +178,18 @@
 ( system c< simply reads source from binary, starting at
   LATEST. Convenient way to bootstrap a new system. )
 : (c<)
-    ( 60 == SYSTEM SCRATCHPAD )
-    0x60 RAM+ @   ( a )
+    ( 2e == BOOT C< PTR )
+    0x2e RAM+ @   ( a )
     DUP C@        ( a c )
     SWAP 1 +      ( c a+1 )
-    0x60 RAM+ !   ( c )
+    0x2e RAM+ !   ( c )
 ;
 
 : BOOT
     0x02 RAM+ CURRENT* !
     LIT< (parse) (find) DROP (parse*) !
-    ( 60 == SYSTEM SCRATCHPAD )
-    CURRENT @ 0x60 RAM+ !
+    ( 2e == SYSTEM SCRATCHPAD )
+    CURRENT @ 0x2e RAM+ !
     ( 0c == CINPTR )
     LIT< (c<) (find) DROP 0x0c RAM+ !
     LIT< INIT (find)
@@ -231,6 +231,3 @@
     ELSE (parse*) @ EXECUTE LITN THEN
     AGAIN
 ;
-
-(xentry) _
-H@ 256 /MOD 2 PC! 2 PC!

forth/readln.fs

@@ -9,11 +9,11 @@
 
 64 CONSTANT INBUFSZ
 ( points to INBUF )
-(sysv) IN(
+: IN( 0x53 RAM+ ;
 ( points to INBUF's end )
-(sysv) IN)
+: IN) 0x55 RAM+ ;
 ( current position in INBUF )
-(sysv) IN>
+: IN> 0x57 RAM+ ;
 
 ( flush input buffer )
 ( set IN> to IN( and set IN> @ to null )

forth/z80a.fs

@@ -9,7 +9,7 @@
 ( H@ offset at which we consider our PC 0. Used to compute
   PC. To have a proper PC, call  "H@ ORG !" at the beginning
   of your assembly process. )
-(sysv) ORG
+: ORG 0x59 RAM+ ;
 : PC H@ ORG @ - ;
 
 ( A, spits an assembled byte, A,, spits an assembled word
@@ -28,12 +28,12 @@
   pre-declare label variables here, which means we have a
   limited number of it. For now, 6 ought to be enough. )
 
-(sysv) L1
-(sysv) L2
-(sysv) L3
-(sysv) L4
-(sysv) L5
-(sysv) L6
+: L1 0x5b RAM+ ;
+: L2 0x5d RAM+ ;
+: L3 0x5f RAM+ ;
+: L4 0x61 RAM+ ;
+: L5 0x63 RAM+ ;
+: L6 0x65 RAM+ ;
 
 ( There are 2 label types: backward and forward. For each
   type, there are two actions: set and write. Setting a label

notes.txt

@@ -86,11 +86,21 @@ RAMSTART   INITIAL_SP
 +0a        PARSEPTR
 +0c        CINPTR
 +0e        WORDBUF
-+2e        SYSVNXT
++2e        BOOT C< PTR
 +4e        INTJUMP
 +51        CURRENTPTR
-+53        RESERVED
-+60        SYSTEM SCRATCHPAD
++53        readln's IN(
++55        readln's IN)
++57        readln's IN>
++59        z80a's ORG
++5b        z80a's L1
++5d        z80a's L2
++5f        z80a's L3
++61        z80a's L4
++63        z80a's L5
++65        z80a's L6
++67        FUTURE USES
++70        DRIVERS
 +80        RAMEND
 
 INITIAL_SP holds the initial Stack Pointer value so that we know where to reset
@@ -110,7 +120,8 @@ CINPTR holds routine address called on C<
 
 WORDBUF is the buffer used by WORD
 
-SYSVNXT is the buffer+tracker used by (sysv)
+BOOT C< PTR is used when Forth boots from in-memory source. See "Initialization
+sequence" below.
 
 INTJUMP All RST offsets (well, not *all* at this moment, I still have to free
 those slots...) in boot binaries are made to jump to this address. If you use
@@ -122,12 +133,12 @@ RAM+2 directly, but rather the value at this address. Most of the time, it
 points to RAM+2, but sometimes, when maintaining alternative dicts (during
 cross compilation for example), it can point elsewhere.
 
-SYSTEM SCRATCHPAD is reserved for temporary system storage or can be reserved
-by low-level drivers. These are the current usages of this space throughout the
-project:
+FUTURE USES section is unused for now.
 
-* 0x60-0x62: (c<) pointer during in-memory initialization (see below)
-* 0x62-0x6a: ACIA buffer pointers in RC2014 recipes.
+DRIVERS section is reserved for recipe-specific drivers. Here is a list of
+known usages:
+
+* 0x70-0x78: ACIA buffer pointers in RC2014 recipes.
 
 *** Initialization sequence
 

recipes/rc2014/conf.fs

@@ -2,5 +2,5 @@
 0xf000 CONSTANT RS_ADDR
 0x80   CONSTANT ACIA_CTL
 0x81   CONSTANT ACIA_IO
-RAMSTART 0x62 + CONSTANT ACIA_MEM
+RAMSTART 0x70 + CONSTANT ACIA_MEM