apps/zasm/avr.asm

@@ -59,11 +59,8 @@ instrNames:
 .db "BST", 0
 .db "SBRC", 0
 .db "SBRS", 0
-.equ	I_RCALL	42
-.db "RCALL", 0
-.db "RJMP", 0
 ; no arg (from here, instrUpMasks2)
-.equ	I_BREAK	44
+.equ	I_BREAK	42
 .db "BREAK", 0
 .db "CLC", 0
 .db "CLH", 0
@@ -91,7 +88,7 @@ instrNames:
 .db "SLEEP", 0
 .db "WDR", 0
 ; Rd(5)
-.equ	I_ASR	70
+.equ	I_ASR	68
 .db "ASR", 0
 .db "COM", 0
 .db "DEC", 0
@@ -140,9 +137,6 @@ instrUpMasks1:
 .db 0b11111010			; BST
 .db 0b11111100			; SBRC
 .db 0b11111110			; SBRS
-; k(12): XXXXkkkk kkkkkkkk
-.db 0b11010000			; RCALL
-.db 0b11000000			; RJMP
 
 ; 16-bit constant masks associated with each instruction. In the same order as
 ; in instrNames
@@ -237,35 +231,33 @@ parseInstruction:
 	jr	c, .spitRd5Rr5
 	cp	I_BLD
 	jr	c, .spitRdK8
-	cp	I_RCALL
-	jr	c, .spitRdBit
 	cp	I_BREAK
-	jr	c, .spitK12
+	jr	c, .spitRdBit
 	cp	I_ASR
 	jr	c, .spitNoArg
 	; spitRd5
-	ld	ix, argSpecs	; 'R', 0
+	call	.readR5
-	call	_parseArgs
+	ret	nz
-	ld	a, h
 	call	.placeRd
 	; continue to .spitNoArg
 .spitNoArg:
 	call	.getUp2
-	jp	.spit
+	jr	.spit
 
 .spitRd5Rr5:
-	ld	ix, argSpecs+2	; 'R', 'R'
+	call	.readR5
-	call	_parseArgs
 	ret	nz
-	ld	a, h
 	call	.placeRd
-	ld	a, l
+	call	readComma
+	call	.readR5
+	ret	nz
+	push	af		; --> lvl 1
 	; let's start with the 4 lower bits
 	and	0xf
 	or	c
 	; We now have our LSB in A. Let's spit it now.
 	call	ioPutB
-	ld	a, l
+	pop	af		; <-- lvl 1
 	; and now that last high bit, currently bit 4, which must become bit 1
 	and	0b00010000
 	rra \ rra \ rra
@@ -276,18 +268,24 @@ parseInstruction:
 	jr	.spitMSB
 
 .spitRdK8:
-	ld	ix, argSpecs+6		; 'r', 8
+	call	.readR4
-	call	_parseArgs
 	ret	nz
-	ld	a, h		; Rd
 	call	.placeRd
-	ld	a, l		; K
+	call	readComma
+	call	readWord
+	call	parseExpr
+	ret	nz
+	ld	a, c
+	ld	a, 0xff
+	call	.IX2A
+	ret	nz
+	push	af		; --> lvl 1
 	; let's start with the 4 lower bits
 	and	0xf
 	or	c
 	; We now have our LSB in A. Let's spit it now.
 	call	ioPutB
-	ld	a, l
+	pop	af		; <-- lvl 1
 	; and now those high 4 bits
 	and	0xf0
 	rra \ rra \ rra \ rra
@@ -296,47 +294,18 @@ parseInstruction:
 	jr	.spitMSB
 
 .spitRdBit:
-	ld	ix, argSpecs+8		; 'R', 'b'
+	call	.readR5
-	call	_parseArgs
 	ret	nz
-	ld	a, h
 	call	.placeRd
-	or	l
+	call	readComma
+	ret	nz
+	call	.readBit
+	ret	nz
 	; LSB is in A and is ready to go
 	call	ioPutB
 	call	.getUp1
 	jr	.spitMSB
 
-.spitK12:
-	; Let's deal with the upcode constant before we destroy DE below
-	call	.getUp1
-	ld	b, (hl)
-	call	readWord
-	call	parseExpr
-	ret	nz
-	push	ix \ pop hl
-	; We're doing the same dance as in _readk7. See comments there.
-	ld	de, 0xfff
-	add	hl, de
-	jp	c, unsetZ	; Carry? number is way too high.
-	ex	de, hl
-	call	zasmGetPC	; --> HL
-	inc	hl \ inc hl
-	ex	de, hl
-	sbc	hl, de
-	jp	c, unsetZ	; Carry? error
-	ld	de, 0xfff
-	sbc	hl, de
-	; We're within bounds! Now, divide by 2
-	ld	a, l
-	rr	h \ rra
-	; LSB in A, spit
-	call	ioPutB
-	ld	a, h
-	and	0xf
-	or	b
-	jp	ioPutB
-
 .spit:
 	; LSB is spit *before* MSB
 	inc	hl
@@ -369,24 +338,39 @@ parseInstruction:
 	inc	b
 .skip1:
 	and	0b111
-	ld	c, a		; can't store in H now, (HL) is used
+	ld	c, a
-	ld	ix, argSpecs+4	; 7, 0
-	call	_parseArgs
-	ret	nz
-	; ok, now we can
-	ld	l, h		; k in L
-	ld	h, c		; bit in H
 .spitBR2:
-	; bit in H, k in L.
+	call	readWord
-	; Our value in L is the number of relative *bytes*. The value we put
+	ret	nz
-	; there is the number of words. Therefore, relevant bits are 7:1
+	call	parseExpr
+	ret	nz
+	; IX contains an absolute value. Turn this into a -64/+63 relative
+	; value by subtracting PC from it. However, before we do that, let's
+	; add 0x7f to it, which we'll remove later. This will simplify bounds
+	; checks. (we use 7f instead of 3f because we deal in bytes here, not
+	; in words)
+	push	ix \ pop hl
+	ld	de, 0x7f
+	add	hl, de		; Carry cleared
+	ex	de, hl
+	call	zasmGetPC	; --> HL
+	; The relative value is actually not relative to current PC, but to
+	; PC after the execution of this branching op. Increase HL by 2.
+	inc	hl \ inc hl
+	ex	de, hl
+	sbc	hl, de
+	jp	c, unsetZ	; Carry? error
+	ld	de, 0x7f
+	sbc	hl, de
+	; We're within bounds! However, our value in L is the number of
+	; relative *bytes*. The value we put there is the number of words.
+	; Thefore, relevant bits are 7:1
 	ld	a, l
 	sla	a \ rl b
 	sla	a \ rl b
-	and	0b11111000
 	; k is now shifted by 3, two of those bits being in B. Let's OR A and
-	; H and we have our LSB ready to go.
+	; C and we have our LSB ready to go.
-	or	h
+	or	c
 	call	ioPutB
 	; Good! MSB now. B is already good to go.
 	ld	a, b
@@ -396,10 +380,10 @@ parseInstruction:
 	; upcode becomes 0b111101
 	inc	b
 .rdBRBS:
-	ld	ix, argSpecs+10		; bit + k(7)
+	call	.readBit
-	call	_parseArgs
+	ret	nz
+	call	readComma
 	ret	nz
-	; bit in H, k in L.
 	jr	.spitBR2
 
 ; local routines
@@ -426,141 +410,8 @@ parseInstruction:
 	ld	hl, instrUpMasks2
 	jp	addHL
 
-; Argspecs: two bytes describing the arguments that are accepted. Possible
+.readR4:
-; values:
+	call	.readR5
-;
-; 0 - None
-; 7 - a k(7) address, relative to PC, *in bytes* (divide by 2 before writing)
-; 8 - a K(8) value
-; 'a' - A 5-bit I/O port value
-; 'A' - A 6-bit I/O port value
-; 'b' - a 0-7 bit value
-; 'R' - an r5 value: r0-r31
-; 'r' - an r4 value: r16-r31
-;
-; All arguments accept expressions, even 'r' ones: in 'r' args, we start by
-; looking if the arg starts with 'r' or 'R'. If yes, it's a simple 'rXX' value,
-; if not, we try parsing it as an expression and validate that it falls in the
-; correct 0-31 or 16-31 range
-argSpecs:
-	.db	'R', 0		; Rd(5)
-	.db	'R', 'R'	; Rd(5) + Rr(5)
-	.db	7, 0		; k(7)
-	.db	'r', 8		; Rd(4) + K(8)
-	.db	'R', 'b'	; Rd(5) + bit
-	.db	'b', 7		; bit + k(7)
-
-; Parse arguments in (HL) according to specs in IX
-; Puts the results in HL (which is not needed anymore after the parsing).
-; First arg in H, second in L.
-; This routine is not used in all cases, some ops don't fit this pattern well
-; and thus parse their args themselves.
-; Z for success.
-_parseArgs:
-	; For the duration of the routine, our final value will be in DE, and
-	; then placed in HL at the end.
-	push	de
-	call	readWord
-	jr	nz, .end
-	ld	a, (ix)
-	call	.parse
-	jr	nz, .end
-	ld	d, a
-	ld	a, (ix+1)
-	or	a
-	jr	z, .end		; no arg
-	call	readComma
-	jr	nz, .end
-	call	readWord
-	jr	nz, .end
-	ld	a, (ix+1)
-	call	.parse
-	jr	nz, .end
-	; we're done with (HL) now
-	ld	l, a
-	cp	a		; ensure Z
-.end:
-	ld	h, d
-	pop	de
-	ret
-
-; Parse a single arg specified in A and returns its value in A
-; Z for success
-.parse:
-	cp	'R'
-	jr	z, _readR5
-	cp	'r'
-	jr	z, _readR4
-	cp	'b'
-	jr	z, _readBit
-	cp	7
-	jr	z, _readk7
-	cp	8
-	jr	z, _readK8
-	ret			; something's wrong
-
-_readBit:
-	push	ix
-	call	parseExpr
-	ld	a, 7
-	call	_IX2A
-	jr	nz, .end
-	or	c
-	ld	c, a
-	cp	a		; ensure Z
-.end:
-	pop	ix
-	ret
-
-_readk7:
-	push	hl
-	push	de
-	push	ix
-	call	parseExpr
-	jr	nz, .end
-	; IX contains an absolute value. Turn this into a -64/+63 relative
-	; value by subtracting PC from it. However, before we do that, let's
-	; add 0x7f to it, which we'll remove later. This will simplify bounds
-	; checks. (we use 7f instead of 3f because we deal in bytes here, not
-	; in words)
-	push	ix \ pop hl
-	ld	de, 0x7f
-	add	hl, de		; Carry cleared
-	ex	de, hl
-	call	zasmGetPC	; --> HL
-	; The relative value is actually not relative to current PC, but to
-	; PC after the execution of this branching op. Increase HL by 2.
-	inc	hl \ inc hl
-	ex	de, hl
-	sbc	hl, de
-	jp	c, .err	; Carry? error
-	ld	de, 0x7f
-	sbc	hl, de
-	; We're within bounds! However, our value in L is the number of
-	; relative *bytes*.
-	ld	a, l
-	cp	a		; ensure Z
-.end:
-	pop	ix
-	pop	de
-	pop	hl
-	ret
-.err:
-	call	unsetZ
-	jr	.end
-
-_readK8:
-	push	ix
-	call	parseExpr
-	jr	nz, .end
-	ld	a, 0xff
-	call	_IX2A
-.end:
-	pop	ix
-	ret
-
-_readR4:
-	call	_readR5
 	ret	nz
 	; has to be in the 16-31 range
 	sub	0x10
@@ -570,25 +421,34 @@ _readR4:
 
 ; read a rXX argument and return register number in A.
 ; Set Z for success.
-_readR5:
+.readR5:
-	push	ix
+	call	readWord
 	ld	a, (hl)
 	call	upcase
 	cp	'R'
-	jr	nz, .end		; not a register
+	ret	nz		; not a register
 	inc	hl
 	call	parseDecimal
-	jr	nz, .end
+	ret	nz
 	ld	a, 31
-	call	_IX2A
+	jr	.IX2A
-.end:
+
-	pop	ix
+.readBit:
+	call	readWord
+	ret	nz
+	call	parseExpr
+	ld	a, 7
+	call	.IX2A
+	ret	nz
+	or	c
+	ld	c, a
+	cp	a		; ensure Z
 	ret
 
 ; Put IX's LSB into A and, additionally, ensure that the new value is <=
 ; than what was previously in A.
 ; Z for success.
-_IX2A:
+.IX2A:
 	push	ix \ pop hl
 	cp	l
 	jp	c, unsetZ	; A < L
@@ -598,5 +458,3 @@ _IX2A:
 	ld	a, l
 	; Z set from "or a"
 	ret
-
-

apps/zasm/io.asm

@@ -80,10 +80,8 @@ ioGetB:
 	call	ioInInclude
 	jr	z, .normalmode
 	; We're in "include mode", read from FS
-	push	ix		; --> lvl 1
 	ld	ix, IO_INCLUDE_BLK
 	call	_blkGetB
-	pop	ix		; <-- lvl 1
 	jr	nz, .includeEOF
 	cp	0x0a		; newline
 	ret	nz		; not newline? nothing to do
@@ -113,11 +111,9 @@ ioGetB:
 	; continue on to "normal" reading. We don't want to return our zero
 .normalmode:
 	; normal mode, read from IN stream
-	push	ix		; --> lvl 1
 	ld	ix, IO_IN_BLK
 	call	_blkGetB
-	pop	ix		; <-- lvl 1
+	cp	0x0a		; newline
-	cp	LF		; newline
 	ret	nz		; not newline? return
 	; inc current lineno
 	push	hl
@@ -134,6 +130,10 @@ ioGetB:
 	pop	af
 	ret
 
+_callIX:
+	jp	(ix)
+	ret
+
 ; Put back non-zero character A into the "ioGetB stack". The next ioGetB call,
 ; instead of reading from IO_IN_BLK, will return that character. That's the
 ; easiest way I found to handle the readWord/gotoNextLine problem.

apps/zasm/tok.asm

@@ -155,7 +155,8 @@ readComma:
 	cp	','
 	ret	z
 	call	ioPutBack
-	jp	unsetZ
+	call	unsetZ
+	ret
 
 ; Read ioGetB until we reach the beginning of next line, skipping comments if
 ; necessary. This skips all whitespace, \n, \r, comments until we reach the

tools/tests/avra/test1.asm

@@ -9,6 +9,3 @@ bar:
 brbs 6, foo
 ori r22, 0x34+4
 sbrs r1, 3
-rjmp	foo
-rcall	baz
-baz: