1
0
mirror of https://github.com/hsoft/collapseos.git synced 2024-11-03 00:20:56 +11:00

Compare commits

..

No commits in common. "a0daed68129147119d7c574f00ddc00cda31cf56" and "8f1d942e5f8bd38eff3e0e4e7b0fd7ece3fdf7b8" have entirely different histories.

4 changed files with 0 additions and 116 deletions

View File

@ -160,49 +160,11 @@ Then, there's the *special stuff*. This is the list of things you can query for:
* `$`: the scratchpad. * `$`: the scratchpad.
**usr**: This calls the memory address specified as an expression argument.
Before doing so, it sets the registers according to a specific logic: Variable
`A`'s LSB goes in register `A`, variable `D` goes in register `DE`, `H` in `HL`
`B` in `BC` and `X` in `IX`. `IY` can't be used because it's used for the jump.
Then, after the call, the value of the registers are put back into the
variables following the same logic.
Let's say, for example, that you want to use the kernel's `printstr` to print
the contents of the scratchpad. First, you would call `addr $` to put the
address of the scratchpad in `A`, then do `h=a` to have that address in `HL`
and, if printstr is, for example, the 21st entry in your jump table, you'd do
`usr 21*3` and see the scratchpad printed!
## Optional modules ## Optional modules
As explained in "glueing" section abolve, this folder contains optional modules. As explained in "glueing" section abolve, this folder contains optional modules.
Here's the documentation for them. Here's the documentation for them.
### blk
Block devices commands. Block devices are configured during kernel
initialization and are referred to by numbers.
**bsel**: Select the active block device. The active block device is the target
of all commands below. You select it by specifying its number. For example,
`bsel 0` selects the first configured device. `bsel 1` selects the second.
A freshly selected blkdev begins with its "pointer" at 0.
**seek**: Moves the blkdev "pointer" to the specified offset. The first
argument is the offset's least significant half (blkdev supports 32-bit
addressing). Is is interpreted as an unsigned integer.
The second argument is optional and is the most significant half of the address.
It defaults to 0.
**getb**: Read a byte in active blkdev at current pointer, then advance the
pointer by one. Read byte goes in `A`.
**putb**: Writes a byte in active blkdev at current pointer, then advance the
pointer by one. The value of the byte is determined by the expression supplied
as an argument. Example: `putb 42`.
### fs ### fs
`fs.asm` provides those commands: `fs.asm` provides those commands:

View File

@ -1,47 +0,0 @@
basBSEL:
call rdExpr
ret nz
push ix \ pop hl
call blkSelPtr
ld a, l
jp blkSel
basBSEEK:
call rdExpr
ret nz
push ix ; --> lvl 1
call rdExpr
push ix \ pop de
pop hl ; <-- lvl 1
jr z, .skip
; DE not supplied, set to zero
ld de, 0
.skip:
xor a ; absolute mode
call blkSeek
cp a ; ensure Z
ret
basGETB:
call blkGetB
ret nz
ld (VAR_TBL), a
ret
basPUTB:
call rdExpr
ret nz
push ix \ pop hl
ld a, l
jp blkPutB
basBLKCmds:
.dw basBSEL
.db "bsel", 0, 0
.dw basBSEEK
.db "bseek", 0
.dw basGETB
.db "getb", 0, 0
.dw basPUTB
.db "putb", 0, 0
.db 0xff, 0xff, 0xff ; end of table

View File

@ -399,31 +399,6 @@ basADDR:
.dw SCRATCHPAD .dw SCRATCHPAD
.db 0 .db 0
basUSR:
call rdExpr
ret nz
push ix \ pop iy
; We have our address to call. Now, let's set up our registers.
; HL comes from variable H. H's index is 7*2.
ld hl, (VAR_TBL+14)
; DE comes from variable D. D's index is 3*2
ld de, (VAR_TBL+6)
; BC comes from variable B. B's index is 1*2
ld bc, (VAR_TBL+2)
; IX comes from variable X. X's index is 23*2
ld ix, (VAR_TBL+46)
; and finally, A
ld a, (VAR_TBL)
call callIY
; Same dance, opposite way
ld (VAR_TBL), a
ld (VAR_TBL+46), ix
ld (VAR_TBL+2), bc
ld (VAR_TBL+6), de
ld (VAR_TBL+14), hl
cp a ; USR never errors out
ret
; direct only ; direct only
basCmds1: basCmds1:
.dw basBYE .dw basBYE
@ -460,6 +435,4 @@ basCmds2:
.db "sleep", 0 .db "sleep", 0
.dw basADDR .dw basADDR
.db "addr", 0, 0 .db "addr", 0, 0
.dw basUSR
.db "usr", 0, 0, 0
.db 0xff, 0xff, 0xff ; end of table .db 0xff, 0xff, 0xff ; end of table

View File

@ -86,7 +86,6 @@
.inc "basic/buf.asm" .inc "basic/buf.asm"
.equ BFS_RAMSTART BUF_RAMEND .equ BFS_RAMSTART BUF_RAMEND
.inc "basic/fs.asm" .inc "basic/fs.asm"
.inc "basic/blk.asm"
.equ BAS_RAMSTART BFS_RAMEND .equ BAS_RAMSTART BFS_RAMEND
.inc "basic/main.asm" .inc "basic/main.asm"
@ -106,9 +105,6 @@ init:
basFindCmdExtra: basFindCmdExtra:
ld hl, basFSCmds ld hl, basFSCmds
call basFindCmd
ret z
ld hl, basBLKCmds
jp basFindCmd jp basFindCmd
emulGetC: emulGetC: