emul/Makefile

@@ -1,4 +1,4 @@
-TARGETS = forth stage blkfs
+TARGETS = forth stage
 OBJS = emul.o libz80/libz80.o
 BIN2C = ../tools/bin2c
 BLKPACK = ../tools/blkpack
@@ -18,14 +18,17 @@ $(BLKUNPACK): $(BLKPACK)
 forth-bin.h: $(BIN2C)
 	$(BIN2C) KERNEL < forth.bin > $@
 
-stage: stage.c $(OBJS) forth-bin.h
-	$(CC) stage.c -DBLKFS_PATH=\"`pwd`/blkfs\" $(OBJS) -o $@
+stage: stage.c $(OBJS) forth-bin.h blkfs-bin.h
+	$(CC) stage.c $(OBJS) -o $@
 
 blkfs: $(BLKPACK)
 	$(BLKPACK) ../blk > $@
 
-forth: forth.c $(OBJS) forth-bin.h
-	$(CC) forth.c -DBLKFS_PATH=\"`pwd`/blkfs\" $(OBJS) -lncurses -o $@
+blkfs-bin.h: blkfs $(BIN2C)
+	$(BIN2C) BLKFS < blkfs > $@
+
+forth: forth.c $(OBJS) forth-bin.h blkfs-bin.h
+	$(CC) forth.c $(OBJS) -o $@
 
 libz80/libz80.o: libz80/z80.c
 	$(MAKE) -C libz80/codegen opcodes
@@ -36,7 +39,7 @@ emul.o: emul.c
 
 
 .PHONY: updatebootstrap
-updatebootstrap: stage xcomp.fs pack
+updatebootstrap: stage xcomp.fs
 	./stage < xcomp.fs > forth.bin
 
 .PHONY: pack
@@ -49,4 +52,5 @@ unpack:
 
 .PHONY: clean
 clean:
-	rm -f $(TARGETS) emul.o *-bin.h blkfs
+	rm -f $(TARGETS) emul.o *-bin.h stage{1,2}.bin blkfs
+	$(MAKE) -C ../tools clean

emul/README.md

@@ -3,11 +3,6 @@
 This folder contains a couple of tools running under the [libz80][libz80]
 emulator.
 
-## Requirements
-
-You need `ncurses` to build the `forth` executable. In debian-based distros,
-it's `libncurses5-dev`.
-
 ## Not real hardware
 
 In the few emulated apps described below, we don't try to emulate real hardware
@@ -25,7 +20,7 @@ First, make sure that the `libz80` git submodule is checked out. If not, run
 
 After that, you can run `make` and it builds the `forth` interpreter.
 
-Run `./forth` to get the Collapse OS prompt. Type `0 LIST` for help.
+Run `./forth` to get the COllapse OS prompt. Type `0 LIST` for help.
 
 ## Problems?
 

emul/forth.c

@@ -1,10 +1,10 @@
 #include <stdint.h>
 #include <stdio.h>
 #include <unistd.h>
-#include <curses.h>
 #include <termios.h>
 #include "emul.h"
 #include "forth-bin.h"
+#include "blkfs-bin.h"
 
 // in sync with glue.asm
 #define RAMSTART 0x900
@@ -24,12 +24,7 @@ static uint16_t blkid = 0;
 
 static uint8_t iord_stdio()
 {
-    int c;
-    if (fp != NULL) {
-        c = getc(fp);
-    } else {
-        c = getch();
-    }
+    int c = getc(fp);
     if (c == EOF) {
         c = 4; // ASCII EOT
     }
@@ -38,13 +33,7 @@ static uint8_t iord_stdio()
 
 static void iowr_stdio(uint8_t val)
 {
-    if (fp != NULL) {
-        putchar(val);
-    } else {
-        if (val >= 0x20 || val == '\n') {
-            echochar(val);
-        }
-    }
+    putchar(val);
 }
 
 static void iowr_ret(uint8_t val)
@@ -80,17 +69,41 @@ static void iowr_blkdata(uint8_t val)
     }
 }
 
-int run()
+
+int main(int argc, char *argv[])
 {
-#ifdef BLKFS_PATH
-    fprintf(stderr, "Using blkfs %s\n", BLKFS_PATH);
-    blkfp = fopen(BLKFS_PATH, "r+");
-    if (!blkfp) {
-        fprintf(stderr, "Can't open\n");
+    bool tty = false;
+    struct termios termInfo;
+    if (argc == 2) {
+        fp = fopen(argv[1], "r");
+        if (fp == NULL) {
+            fprintf(stderr, "Can't open %s\n", argv[1]);
+            return 1;
+        }
+    } else if (argc == 1) {
+        fp = stdin;
+        tty = isatty(fileno(stdin));
+        if (tty) {
+            // Turn echo off: the shell takes care of its own echoing.
+            if (tcgetattr(0, &termInfo) == -1) {
+                printf("Can't setup terminal.\n");
+                return 1;
+            }
+            termInfo.c_lflag &= ~ECHO;
+            termInfo.c_lflag &= ~ICANON;
+            tcsetattr(0, TCSAFLUSH, &termInfo);
+        }
+    } else {
+        fprintf(stderr, "Usage: ./forth [filename]\n");
+        return 1;
+    }
+    blkfp = fopen("blkfs", "r+");
+    if (blkfp) {
+        fprintf(stderr, "Using blkfs file\n");
+    } else {
+        blkfp = fmemopen((char*)BLKFS, sizeof(BLKFS), "r");
+        fprintf(stderr, "Using in-memory read-only blkfs\n");
     }
-#else
-    blkfp = NULL;
-#endif
     Machine *m = emul_init();
     m->ramstart = RAMSTART;
     m->iord[STDIO_PORT] = iord_stdio;
@@ -107,34 +120,16 @@ int run()
     // Run!
     while (emul_step());
 
+    if (tty) {
+        printf("\nDone!\n");
+        termInfo.c_lflag |= ECHO;
+        termInfo.c_lflag |= ICANON;
+        tcsetattr(0, TCSAFLUSH, &termInfo);
+        emul_printdebug();
+    }
     if (blkfp != NULL) {
         fclose(blkfp);
     }
+    fclose(fp);
     return retcode;
 }
-
-int main(int argc, char *argv[])
-{
-    if (argc == 2) {
-        fp = fopen(argv[1], "r");
-        if (fp == NULL) {
-            fprintf(stderr, "Can't open %s\n", argv[1]);
-            return 1;
-        }
-        int ret = run();
-        fclose(fp);
-        return ret;
-    } else if (argc == 1) {
-        fp = NULL;
-        initscr(); cbreak(); noecho(); nl(); clear();
-        scrollok(stdscr, 1);
-        int ret = run();
-        nocbreak(); echo(); endwin();
-        printf("\nDone!\n");
-        emul_printdebug();
-        return ret;
-    } else {
-        fprintf(stderr, "Usage: ./forth [filename]\n");
-        return 1;
-    }
-}

emul/stage.c

@@ -3,10 +3,7 @@
 #include <unistd.h>
 #include "emul.h"
 #include "forth-bin.h"
-
-#ifndef BLKFS_PATH
-#error BLKFS_PATH needed
-#endif
+#include "blkfs-bin.h"
 
 /* Staging binaries
 
@@ -40,7 +37,7 @@ static int running;
 static uint16_t start_here = 0;
 static uint16_t end_here = 0;
 static uint16_t blkid = 0;
-static FILE *blkfp;
+static unsigned int blkpos = 0;
 
 static uint8_t iord_stdio()
 {
@@ -68,22 +65,16 @@ static void iowr_blk(uint8_t val)
 {
     blkid <<= 8;
     blkid |= val;
-    fseek(blkfp, blkid*1024, SEEK_SET);
+    blkpos = blkid * 1024;
 }
 
 static uint8_t iord_blkdata()
 {
-    return getc(blkfp);
+    return BLKFS[blkpos++];
 }
 
 int main(int argc, char *argv[])
 {
-    fprintf(stderr, "Using blkfs %s\n", BLKFS_PATH);
-    blkfp = fopen(BLKFS_PATH, "r+");
-    if (!blkfp) {
-        fprintf(stderr, "Can't open\n");
-        return 1;
-    }
     Machine *m = emul_init();
     m->ramstart = RAMSTART;
     m->iord[STDIO_PORT] = iord_stdio;