forth/readln.fs

@@ -40,14 +40,12 @@
 ;
 
 ( read one char into input buffer and returns whether we
-  should continue, that is, whether CR was not met. )
+  should continue, that is, whether newline was not met. )
 : (rdlnc)                   ( -- f )
     ( buffer overflow? same as if we typed a newline )
     IN> @ IN) @ = IF 0x0a ELSE KEY THEN     ( c )
     ( del? same as backspace )
     DUP 0x7f = IF DROP 0x8 THEN
-    ( lf? same as cr )
-    DUP 0x0a = IF DROP 0xd THEN
     ( echo back )
     DUP EMIT                    ( c )
     ( bacspace? handle and exit )
@@ -59,17 +57,17 @@
       our string )
     IN> @ ! 1 IN> +!            ( c )
     ( if newline, replace with zero to indicate EOL )
-    DUP 0xd = IF DROP 0 THEN
+    DUP 0xa = IF DROP 0 THEN
 ;
 
 ( Read one line in input buffer and make IN> point to it )
 : (rdln)
     ( Should we prompt? if we're executing a word, FLAGS bit
       0, then we shouldn't. )
-    FLAGS @ 0x1 AND NOT IF '>' EMIT SPC THEN
+    FLAGS @ 0x1 AND NOT IF LF '>' EMIT SPC THEN
     (infl)
     BEGIN (rdlnc) NOT UNTIL
-    LF IN( @ IN> !
+    IN( @ IN> !
 ;
 
 ( And finally, implement a replacement for the (c<) routine )

recipes/rc2014/README.md

@@ -39,11 +39,11 @@ device I use in this recipe.
 
 ### Gathering parts
 
-* A "classic" RC2014 with Serial I/O
 * [Forth's stage 2 binary][stage2]
 * [romwrite][romwrite] and its specified dependencies
 * [GNU screen][screen]
-* A FTDI-to-TTL cable to connect to the Serial I/O module
+* A FTDI-to-TTL cable to connect to the Serial I/O module of the RC2014
+* (Optional) RC2014's Digital I/O module
 
 ### Configure your build
 
@@ -85,13 +85,6 @@ In my case (arduino uno), it's `/dev/ttyACM0`. Then:
 
 See romwrite's README for details about these commands.
 
-Note that this method is slow and clunky, but before long, you won't be using
-it anymore. Writing to an EEPROM is much easier and faster from a RC2014
-running Collapse OS, so once you have that first Collapse OS ROM, you'll be
-much better equipped for further toying around (unless, of course, you already
-had tools to write to EEPROM. In which case, you'll be ignoring this section
-altogether).
-
 ### Running
 
 Put the AT28 in the ROM module, don't forget to set the A14 jumper high, then
@@ -101,18 +94,19 @@ identify the tty bound to it (in my case, `/dev/ttyUSB0`). Then:
     screen /dev/ttyUSB0 115200
 
 Press the reset button on the RC2014 to have Forth begin its bootstrap process.
-Note that it has to build more than half of itself from source. It takes about
-30 seconds to complete.
+Note that it has to build more than half of itself from source. It takes a
+while (TODO: indicate how many minutes).
 
-Once bootstrapping is done you should see the Collapse OS prompt. That's a full
-Forth interpreter. You can have fun right now.
+Once bootstrapping is done, you'll get a and you should see the Collapse OS
+prompt. That's a full Forth interpreter. You can have fun right now.
 
-However, that long boot time is kinda annoying. Moreover, that bootstrap code
-being in source form takes precious space from our 8K ROM. We already have our
-compiled dictionary in memory. All we need to have a instant-booting Forth is
-to combine our stage1 with our compiled dict in memory, after some relinking.
+However, that multi-minutes boot is kinda annoying. Moreover, that bootstrap
+code being in source form takes precious space from our 8K ROM. We already have
+our compiled dictionary in memory. All we need to have a instant-booting Forth
+is to combine our stage1 with our compiled dict in memory, after some
+relinking.
 
-TODO: write this, do this.
+TODO: write this.
 
 [rc2014]: https://rc2014.co.uk
 [romwrite]: https://github.com/hsoft/romwrite

recipes/rc2014/glue.asm

@@ -0,0 +1,57 @@
+.equ	RAMSTART	0x8000
+.equ	RAMEND		0xffff
+.equ	ACIA_CTL	0x80	; Control and status. RS off.
+.equ	ACIA_IO		0x81	; Transmit. RS on.
+.equ	DIGIT_IO	0x00	; digital I/O's port
+
+jp	init
+
+; interrupt hook
+.fill	0x38-$
+jp	aciaInt
+
+.inc "err.h"
+.inc "ascii.h"
+.inc "core.asm"
+.inc "str.asm"
+.equ	ACIA_RAMSTART	RAMSTART
+.inc "acia.asm"
+
+.equ	STDIO_RAMSTART	ACIA_RAMEND
+.equ	STDIO_GETC	aciaGetC
+.equ	STDIO_PUTC	aciaPutC
+.inc "stdio.asm"
+
+; *** BASIC ***
+
+; RAM space used in different routines for short term processing.
+.equ	SCRATCHPAD_SIZE	STDIO_BUFSIZE
+.equ	SCRATCHPAD	STDIO_RAMEND
+.inc "lib/util.asm"
+.inc "lib/ari.asm"
+.inc "lib/parse.asm"
+.inc "lib/fmt.asm"
+.equ	EXPR_PARSE	parseLiteralOrVar
+.inc "lib/expr.asm"
+.inc "basic/util.asm"
+.inc "basic/parse.asm"
+.inc "basic/tok.asm"
+.equ	VAR_RAMSTART	SCRATCHPAD+SCRATCHPAD_SIZE
+.inc "basic/var.asm"
+.equ	BUF_RAMSTART	VAR_RAMEND
+.inc "basic/buf.asm"
+.equ	BAS_RAMSTART	BUF_RAMEND
+.inc "basic/main.asm"
+
+init:
+	di
+	; setup stack
+	ld	sp, RAMEND
+	im 1
+
+	call	aciaInit
+	ei
+	call	basInit
+	jp	basStart
+
+

recipes/rc2014/run.fs

@@ -1,7 +1,7 @@
 : INIT
     ACIA$
     (c<$)
-    ." Collapse OS" CR LF
+    ." Collapse OS" LF
     ( 0c == CINPTR )
     ['] (c<) 0x0c RAM+ !
 ;