boot: remove _bend

It's not needed anymore now that the boot binary is built in one pass.

emul/Makefile

@@ -15,10 +15,10 @@ $(SLATEST):
 $(BIN2C):
 	$(MAKE) -C ../tools
 
-# z80c.bin and boot.bin are not in the prerequisites because they're bootstrap
+# z80c.bin is not in the prerequisites because it's a bootstrap
-# binaries that should be updated manually through make updatebootstrap.
+# binary that should be updated manually through make updatebootstrap.
 forth/forth0.bin: $(SLATEST)
-	cat forth/boot.bin forth/z80c.bin > $@
+	cp forth/z80c.bin $@
 	$(SLATEST) $@
 	cat forth/emul.fs >> $@
 
@@ -37,7 +37,7 @@ forth/core.bin: $(FORTHSRC_PATHS) forth/stage1
 	cat $(FORTHSRC_PATHS) ./forth/stop.fs | $(STRIPFC) | ./forth/stage1 | tee $@ > /dev/null
 
 forth/forth1.bin: forth/core.bin $(SLATEST)
-	cat forth/boot.bin forth/z80c.bin forth/core.bin > $@
+	cat forth/z80c.bin forth/core.bin > $@
 	$(SLATEST) $@
 
 forth/forth1-bin.h: forth/forth1.bin $(BIN2C)
@@ -60,10 +60,11 @@ emul.o: emul.c
 	$(CC) -c -o emul.o emul.c
 
 
+forth/z80c.bin: forth/stage2
+	cat ./forth/conf.fs ../forth/xcomp.fs ./forth/xcomp.fs ../forth/boot.fs ../forth/z80c.fs ../forth/icore.fs | ./forth/stage2 | tee $@ > /dev/null
+
 .PHONY: updatebootstrap
-updatebootstrap: forth/stage2
+updatebootstrap: forth/z80c.bin
-	cat ./forth/conf.fs ../forth/boot.fs | ./forth/stage2 | tee forth/boot.bin > /dev/null
-	cat ./forth/conf.fs ../forth/xcomp.fs ./forth/xcomp.fs ../forth/z80c.fs ../forth/icore.fs | ./forth/stage2 | tee forth/z80c.bin > /dev/null
 
 .PHONY: clean
 clean:

emul/forth/xcomp.fs

@@ -1,11 +1,18 @@
+: _
+    ['] EXIT ,
+    R> DROP     ( exit : )
+    XCOFF
+; IMMEDIATE
+';' CURRENT @ 4 - C!
+
+: (find) (xfind) ;
+: ['] X['] ; IMMEDIATE
+: COMPILE XCOMPILE ; IMMEDIATE
 : CODE XCODE ;
 : IMMEDIATE XIMM ;
 : : [ ' X: , ] ;
 
 CURRENT @ XCURRENT !
-H@ ' _bend - 4 + XOFF !
 
-( dummy entry for dict hook )
-(xentry) _
 H@ 256 /MOD 2 PC! 2 PC!
-
+H@ XOFF !

forth/boot.fs

@@ -87,6 +87,7 @@ L1 BSET ( CBR )
 'E' A, 'X' A, 'E' A, 'C' A, 'U' A, 'T' A, 'E' A,
 PC L1 @ - A,, ( prev )
 7 A,
+H@ XCURRENT !        ( set current tip of dict )
 L2 BSET ( used frequently below )
     0x17 A,,         ( nativeWord )
     IY POPqq,        ( is a wordref )
@@ -366,20 +367,3 @@ PC ORG @ 0x22 + ! ( litWord )
       want... )
     RAMSTART 0x06 + LD(nn)HL, ( RAMSTART+0x06 == IP )
     JPNEXT,
-
-( filler )
-NOP, NOP, NOP, NOP, NOP,
-
-( DICT HOOK )
-( This dummy dictionary entry serves two purposes:
-  1. Allow binary grafting. Because each binary dict always
-     end with a dummy entry, we always have a predictable
-     prev offset for the grafter's first entry.
-  2. Tell icore's "_c" routine where the boot binary ends.
-     See comment there.
-)
-'_' A, 'b' A, 'e' A, 'n' A, 'd' A,
-PC L2 @ - A,, ( prev )
-5 A,
-
-H@ 256 /MOD 2 PC! 2 PC!

forth/xcomp.fs

@@ -14,18 +14,29 @@
   "'" and friends will *not* find words you're about to
   define. Only (xfind) will.
 
-  Words ":", "IMMEDIATE" and "CODE" are not automatically
+  Words overrides like ":", "IMMEDIATE" and "CODE" are not
-  shadowed to allow the harmless inclusion of this unit. This
+  automatically shadowed to allow the harmless inclusion of
-  shadowing has to take place in your xcomp configuration.
+  this unit. This shadowing has to take place in your xcomp
+  configuration.
 
   See example in /emul/forth/xcomp.fs
+
+  Note that this cross compilation unit is far from foolproof
+  and cannot cross compile any kind of code. Cross compliation
+  of Forth dicts is *tricky*. This unit is designed to cross
+  compile the core full interpreter, that is, the contents
+  of the "/forth" folder of the project.
+
+  Cross compiling anything else might work, but as soon as
+  you start defining immediates and using them on-the-fly,
+  things get icky.
 )
 
 VARIABLE XCURRENT
 VARIABLE XOFF
 
 : XCON XCURRENT CURRENT* ! ;
-: XCOFF CURRENT CURRENT* ! ;
+: XCOFF 0x02 RAM+ CURRENT* ! ;
 
 : (xentry) XCON (entry) XCOFF ;
 
@@ -33,15 +44,37 @@ VARIABLE XOFF
 
 : XIMM XCON IMMEDIATE XCOFF ;
 
+: XAPPLY
+    DUP XOFF @ > IF XOFF @ - THEN
+;
+
+( Run find in XCURRENT and apply XOFF )
+: (xfind)
+    XCURRENT @ SWAP     ( xcur w )
+    _find               ( a f )
+    IF  ( a )
+        ( apply XOFF )
+        XAPPLY 1
+    ELSE
+        0
+    THEN
+;
+
+: X' XCON ' XCOFF XAPPLY ;
+: X['] X' LITN ;
+( TODO: am I making the word "," stable here? )
+: XCOMPILE X' LITN ['] , , ;
+
 : X:
-    XCON
+    (xentry)
-    (entry)
     ( 0e == compiledWord )
     [ 0x0e LITN ] ,
     BEGIN
     ( DUP is because we need a copy in case it's IMMED )
     WORD DUP
-    (find)      ( w a f )
+    ( cross compile CURRENT )
+    XCURRENT @ SWAP     ( w xcur w )
+    _find               ( w a f )
     IF
         ( is word )
         DUP IMMED?
@@ -49,23 +82,33 @@ VARIABLE XOFF
             ( When encountering IMMEDIATE, we exec the *host*
               word. )
             DROP    ( w )
-            ( hardcoded system CURRENT )
+            ( system CURRENT )
             0x02 RAM+ @ SWAP        ( cur w )
             _find                   ( a f )
             NOT IF ABORT THEN   ( a )
-            EXECUTE
+            XCON EXECUTE XCOFF
         ELSE
             ( not an immed. drop backup w and write, with
               offset. )
             SWAP DROP   ( a )
-            DUP 0x100 > IF XOFF @ - THEN
+            XAPPLY
             ,
         THEN
     ELSE ( w a )
-        ( maybe number )
+        ( not found? it might be an immediate that isn't yet defined in our
+          cross-compiled dict. It's alright, we can find-and-execute it. )
         DROP ( w )
+        ( system CURRENT )
+        0x02 RAM+ @ SWAP        ( cur w )
+        _find                   ( a f )
+        IF
+            ( found. It *must* be an IMMED )
+            DUP IMMED? NOT IF ABORT THEN
+            EXECUTE
+        ELSE
+            ( not found. maybe number )
             (parse*) @ EXECUTE LITN
         THEN
+    THEN
     AGAIN
-    XCOFF
 ;