Rename (find) to FIND

I hadn't noticed that this word was almost ANS compliant.

blk/037

@@ -10,7 +10,7 @@ Entry management
 ,        n --     Write n in HERE and advance it.
 ALLOT    n --     Move HERE by n bytes
 C,       b --     Write byte b in HERE and advance it.
+FIND     w -- a f Like '?, but for w.
 EMPTY  --         Rewind HERE and CURRENT where they were at
                   system initialization.            
-
                                                         (cont.)

blk/056

@@ -6,7 +6,9 @@ Logic
 ><   n l h -- f Push true if l < n < h
 =><= n l h -- f Push true if l <= n <= h
 CMP  n1 n2 -- n Compare n1 and n2 and set n to -1, 0, or 1.
-               n=0: a1=a2. n=1: a1>a2. n=-1: a1<a2.
+                n=0: a1=a2. n=1: a1>a2. n=-1: a1<a2.
+MIN  a b -- n   Returns the lowest of a and b
+MAX  a b -- n   Returns the highest of a and b
 NOT  f -- f     Push the logical opposite of f
 
 

blk/081

@@ -1,6 +1,6 @@
 RAMSTART  FUTURE USES          +3c       BLK(*
-+02       CURRENT              +3e       FUTURE USES
-+04       HERE                 
++02       CURRENT              +3e       XYPOS
++04       HERE                 +40       FUTURE USES
 +06       C<?                  +51       CURRENTPTR
 +08       C<* override         +53       (emit) override
 +0a       NLPTR                +55       (key) override

blk/083

@@ -7,8 +7,8 @@ WORDBUF is the buffer used by WORD
 BOOT C< PTR is used when Forth boots from in-memory
 source. See "Initialization sequence" below.
 
-
-
+XYPOS Current position of the cursor on screen. The meaning of
+the pos in terms of row and cols is driver-dependent.
 
 
 

blk/090

@@ -1,15 +1,10 @@
-4. Call INTERPRET
+4. Call INTERPRET which interprets boot source code until
+   ASCII EOT (4) is met. This usually init drivers.
+5. Initialize rdln buffer, _sys entry (for EMPTY), prints
+   "CollapseOS" and then calls (main).
+6. (main) interprets from rdln input (usually from KEY) until
+   EOT is met, then calls BYE.
 
-In other words, BOOT interprets bytes directly following
-CURRENT as Forth source code. This code will typically
-initialize all subsystems and then call RDLN$. As soon as
-this is called, INTERPRET will begin reading from RDLN< which
-reads from KEY.
-
-In the "/emul" binaries, "HERE" is readjusted to "CURRENT @" so
-that we don't have to relocate compiled dicts. Note that in
-this context, the initialization code is fighting for space
-with HERE: New entries to the dict will overwrite that code!
-Also, because we're barebone, we can't have comments. This can
-lead to peculiar code in this area where we try to "waste"
-space in initialization code.
+In RAM-only environment, we will typically have a
+"CURRENT @ HERE !" line during init to have HERE begin at the
+end of the binary instead of RAMEND.

blk/131

@@ -1,9 +0,0 @@
-( Relink a regular Forth full interpreter. )
-: RLCORE
-    LIT< [ (find) DROP          ( target )
-    DUP 3 - @                   ( t prevoff )
-    ( subtract [ name length )
-    1-                          ( t o )
-    RLDICT
-;
-

blk/156

@@ -1,4 +1,4 @@
 : EMPTY
-    LIT< _sys (find) NOT IF ABORT THEN
+    LIT< _sys FIND NOT IF ABORT THEN
     DUP HERE ! CURRENT ! ;
 

blk/263

@@ -11,5 +11,5 @@ VARIABLE XCURRENT
 : X['] XCON ' _xapply LITA XCOFF ;
 : XCOMPILE
     XCON ' _xapply LITA
-    LIT< , (find) DROP _xapply , XCOFF ;
+    LIT< , FIND DROP _xapply , XCOFF ;
 : X[COMPILE] XCON ' _xapply , XCOFF ;

blk/393

@@ -3,13 +3,14 @@
 : HERE 0x04 RAM+ ;
 : CURRENT* 0x51 RAM+ ;
 : CURRENT CURRENT* @ ;
+: XYPOS 0x40 RAM+ ;
 
 ( w -- a f )
-: (find) CURRENT @ SWAP _find ;
+: FIND CURRENT @ SWAP _find ;
 
 : QUIT
     (resRS)
     0 0x08 RAM+ !  ( 08 == C<* override )
-    LIT< INTERPRET (find) DROP EXECUTE
+    LIT< (main) FIND DROP EXECUTE
 ;
 1 25 LOADR+ ( xcomp core low )

blk/394

@@ -1,15 +1,12 @@
 : ABORT (resSP) QUIT ;
-: ERR LIT< (print) (find) IF EXECUTE THEN ABORT ;
+: ERR LIT< (print) FIND IF EXECUTE THEN ABORT ;
 : = CMP NOT ; : < CMP -1 = ; : > CMP 1 = ;
 : 0< 32767 > ; : >= < NOT ; : <= > NOT ; : 0>= 0< NOT ;
-( n l h -- f )
-: >< 2 PICK > ( n l f ) ROT ROT > AND ;
+: >< ( n l h -- f ) 2 PICK > ( n l f ) ROT ROT > AND ;
 : =><= 2 PICK >= ( n l f ) ROT ROT >= AND ;
-( a -- a+1 c )
-: C@+ DUP C@ SWAP 1+ SWAP ;
-( c a -- a+1 )
-: C!+ SWAP OVER C! 1+ ;
-( a -- a-1 c )
-: C@- DUP C@ SWAP 1- SWAP ;
-( c a -- a-1 )
-: C!- SWAP OVER C! 1- ;
+: MIN ( n n - n ) 2DUP > IF SWAP THEN DROP ;
+: MAX ( n n - n ) 2DUP < IF SWAP THEN DROP ;
+: C@+ ( a -- a+1 c ) DUP C@ SWAP 1+ SWAP ;
+: C!+ ( c a -- a+1 ) SWAP OVER C! 1+ ;
+: C@- ( a -- a-1 c ) DUP C@ SWAP 1- SWAP ;
+: C!- ( c a -- a-1 ) SWAP OVER C! 1- ;

blk/403

@@ -4,5 +4,5 @@
     (parseb) IF EXIT THEN
     (parsed) IF EXIT THEN
     ( nothing works )
-    LIT< (wnf) (find) IF EXECUTE ELSE ABORT THEN
+    LIT< (wnf) FIND IF EXECUTE ELSE ABORT THEN
 ;

blk/405

@@ -1,5 +1,6 @@
 : WS? 33 < ;
 : EOT? 4 = ; ( 4 == ASCII EOT, CTRL+D )
+: EOT, 4 C, ;
 
 : TOWORD
     0 ( dummy ) BEGIN

blk/410

@@ -1,7 +1,7 @@
-: '? WORD (find) ;
+: '? WORD FIND ;
 : '
     '? (?br) [ 4 , ] EXIT
-    LIT< (wnf) (find) DROP EXECUTE
+    LIT< (wnf) FIND DROP EXECUTE
 ;
 : ROLL
     DUP NOT IF EXIT THEN

blk/417

@@ -2,8 +2,8 @@
     H@ 0x3c ( BLK(* ) RAM+ !
     1024 ALLOT
     ( LOAD detects end of block with ASCII EOT. This is why
-      we write it there. EOT == 0x04 )
-    4 C,
+      we write it there. )
+    EOT,
     0 BLKDTY !
     -1 BLK> !
 ;

blk/421

@@ -11,6 +11,5 @@
 : BS 8 EMIT ; : LF 10 EMIT ; : CR 13 EMIT ;
 : CRLF CR LF ; : SPC 32 EMIT ;
 : NL 0x0a RAM+ @ ( NLPTR ) DUP IF EXECUTE ELSE DROP CRLF THEN ;
-: (ok) SPC LIT" ok" (print) NL ;
 : (uflw) LIT" stack underflow" ERR ;
 : (wnf) (print) SPC LIT" word not found" ERR ;

blk/432

@@ -1,8 +1,8 @@
 : INTERPRET
     BEGIN
     WORD DUP C@ EOT? IF DROP EXIT THEN
-    (find) NOT IF (parse) ELSE EXECUTE THEN
-    C<? NOT IF (ok) THEN
+    FIND NOT IF (parse) ELSE EXECUTE THEN
+    C<? NOT IF SPC LIT< ok (print) NL THEN
     AGAIN ;
 ( Read from BOOT C< PTR and inc it. )
 : (boot<)

blk/436

@@ -1,3 +1,4 @@
+: (main) INTERPRET BYE ;
 : BOOT
     0x02 RAM+ CURRENT* !
     CURRENT @ 0x2e RAM+ ! ( 2e == BOOT C< PTR )
@@ -8,6 +9,6 @@
     ( 0c == C<* )
     ['] (boot<) 0x0c RAM+ !
     ( boot< always has a char waiting. 06 == C<?* )
-    1 0x06 RAM+ !
-    INTERPRET BYE ;
-
+    1 0x06 RAM+ ! INTERPRET
+    RDLN$ LIT< _sys [entry]
+    LIT< CollapseOS (print) NL (main) ;

blk/437

@@ -9,7 +9,7 @@
     (entry)
     [ 14 ( == compiledWord ) LITN ] C,
     BEGIN
-        WORD (find)
+        WORD FIND
         IF ( is word ) DUP IMMED? IF EXECUTE ELSE , THEN
         ELSE ( maybe number ) (parse) LITN THEN
     AGAIN ;

blk/618

@@ -12,4 +12,4 @@ RAMSTART 0x70 + CONSTANT ACIA_MEM
 (entry) _
 ( Update LATEST )
 PC ORG @ 8 + !
-," : _ ACIA$ RDLN$ (ok) ; _ "
+," ACIA$ " EOT,

blk/627

@@ -1,14 +1,6 @@
-: _set ( row col tilenum -- )
-    ROT 5 LSHIFT ROT OR 0x7800 OR _ctl
-    _data 1 _zero
+: (emit)
+    XYPOS @ 2 * 0x7800 OR _ctl
+    0x20 - 0x5e MIN ( tilenum ) _data 1 _zero
+    XYPOS @ 1+ DUP [ VDP_COLS VDP_ROWS * LITN ]
+    = IF DROP 0 THEN XYPOS !
 ;
-: VDP$
-    9 0 DO _idat I 2 * + @ _ctl LOOP _blank
-    ( palettes )
-    0xc000 _ctl
-    ( BG ) 1 _zero 0x3f _data 14 _zero
-    ( sprite, inverted colors ) 0x3f _data 15 _zero
-    0x4000 _ctl 0x5e 0 DO ~FNT I 7 * + _sfont LOOP
-    0 0 1 _set
-;
-

blk/628

@@ -0,0 +1,9 @@
+: VDP$
+    9 0 DO _idat I 2 * + @ _ctl LOOP _blank
+    ( palettes )
+    0xc000 _ctl
+    ( BG ) 1 _zero 0x3f _data 14 _zero
+    ( sprite, inverted colors ) 0x3f _data 15 _zero
+    0x4000 _ctl 0x5e 0 DO ~FNT I 7 * + _sfont LOOP
+    0 XYPOS !
+;

emul/xcomp.fs

@@ -28,13 +28,9 @@
 ( Update LATEST )
 PC ORG @ 8 + !
 ," CURRENT @ HERE ! "
-," : INIT "
 ," BLK$ "
-," ['] EFS@ BLK@* ! "
-," ['] EFS! BLK!* ! "
-," RDLN$ "
-," LIT< _sys [entry] "
-," LIT< CollapseOS (print) NL "
-," ; INIT "
+," ' EFS@ BLK@* ! "
+," ' EFS! BLK!* ! "
+EOT,
 ORG @ 256 /MOD 2 PC! 2 PC!
 H@ 256 /MOD 2 PC! 2 PC!

recipes/sms/xcomp.fs

@@ -21,12 +21,12 @@ CURRENT @ XCURRENT !
 282 LOAD  ( boot.z80 )
 393 LOAD  ( xcomp core low )
 CREATE ~FNT CPFNT7x7
-623 627 LOADR ( VDP )
-: (key) 0 ; : (emit) DROP ;
+623 628 LOADR ( VDP )
+: (key) 4 ;
 420 LOAD  ( xcomp core high )
 (entry) _
 ( Update LATEST )
 PC ORG @ 8 + !
-," VDP$ BYE "
+," VDP$ " EOT,
 ORG @ 0x100 - 256 /MOD 2 PC! 2 PC!
 H@ 256 /MOD 2 PC! 2 PC!

recipes/ti84/xcomp.fs

@@ -68,6 +68,6 @@ CREATE ~FNT CPFNT3x5
 (entry) _
 ( Update LATEST )
 PC ORG @ 8 + !
-," : _ LCD$ KBD$ (ok) RDLN$ ; _ "
+," LCD$ KBD$ " EOT,
 ORG @ 0x100 - 256 /MOD 2 PC! 2 PC!
 H@ 256 /MOD 2 PC! 2 PC!

recipes/trs80/xcomp.fs

@@ -15,6 +15,6 @@ RS_ADDR 0x80 - CONSTANT RAMSTART
 PC ORG @ 8 + !
 ," CURRENT @ HERE ! "
 ( 0x0a == NLPTR. TRS-80 wants CR-only newlines )
-," : _ ['] CR 0x0a RAM+ ! BLK$ FD$ (ok) RDLN$ ; _ "
+," ' CR 0x0a RAM+ ! BLK$ FD$ " EOT,
 ORG @ 256 /MOD 2 PC! 2 PC!
 H@ 256 /MOD 2 PC! 2 PC!