blk/001

@@ -5,10 +5,11 @@ MASTER INDEX
 120 Linker                    140 Addressed devices
 150 Extra words
 200 Z80 assembler             260 Cross compilation
-280 Z80 boot code             390 Cross-compiled core
+280 Z80 boot code             350 ACIA driver
-439 XPACKed core              
+370 SD Card driver            390 Cross-compiled core
+439 Core words                480 AT28 Driver
 490 TRS-80 Recipe             520 Fonts
-550 TI-84+ Recipe             580 RC2014 Recipe
+550 TI-84+ Recipe
 
 
 

blk/081

@@ -7,7 +7,6 @@ RAMSTART  FUTURE USES          +55       (key) override
 +0c       C<*                  +70       DRIVERS
 +0e       WORDBUF              +80       RAMEND
 +2e       BOOT C< PTR
-+30       FUTURE USES
 +4e       INTJUMP
 +51       CURRENTPTR
 +53       (emit) override

blk/089

@@ -1,16 +1,16 @@
 Initialization sequence
 
-On boot, we jump to the "main" routine in B289 which does
+On boot, we jump to the "main" routine in boot.fs which does
 very few things.
 
-1. Set SP to PS_ADDR and IX to RS_ADDR
+1. Set SP to 0x10000-6
 2. Sets HERE to RAMEND (RAMSTART+0x80).
 3. Sets CURRENT to value of LATEST field in stable ABI.
 4. Look for the word "BOOT" and calls it.
 
-In a normal system, BOOT is in xcomp core (B411) and does a
+In a normal system, BOOT is in icore and does a few things:
-few things:
 
-1. Initialize all overrides to 0.
+1. Find "(c<)" a set CINPTR to it (what C< calls).
-2. Write LATEST in BOOT C< PTR ( see below )
+2. Initialize all overrides to 0.
-3. Set "C<*", the word that C< calls to (boot<).        (cont.)
+3. Write LATEST in BOOT C< PTR ( see below )
+4. Find "INIT". If found, execute. Otherwise, "INTERPRET"(cont)

blk/090

@@ -1,15 +1,16 @@
-4. Call INTERPRET
+On a bare system (only boot+icore), this sequence will result
+in (c<) reading characters from memory starting from CURRENT
+(this is why we put CURRENT in BOOT C< PTR, it tracks current
+pos ).
 
-In other words, BOOT interprets bytes directly following
+This means that you can put initialization code in source form
-CURRENT as Forth source code. This code will typically
+right into your binary, right after your last compiled dict
-initialize all subsystems and then call RDLN$. As soon as
+entry and it's going to be executed as such until you set a new
-this is called, INTERPRET will begin reading from RDLN< which
+(c<).
-reads from KEY.
 
-In the "/emul" binaries, "HERE" is readjusted to "CURRENT @" so
+Note that there is no EMIT in a bare system. You have to take
-that we don't have to relocate compiled dicts. Note that in
+care of supplying one before your load core.fs and its higher
-this context, the initialization code is fighting for space
+levels.
-with HERE: New entries to the dict will overwrite that code!
+
-Also, because we're barebone, we can't have comments. This can
+
-lead to peculiar code in this area where we try to "waste"
+                                                        (cont.)
-space in initialization code.

blk/091

@@ -0,0 +1,16 @@
+(cont.) In the "/emul" binaries, "HERE" is readjusted to
+"CURRENT @" so that we don't have to relocate compiled dicts.
+Note that in this context, the initialization code  is fighting
+for space with HERE: New entries to the dict will overwrite
+that code!  Also, because we're barebone, we can't have
+comments. This can lead to peculiar code in this area where we
+try to "waste" space in initialization code.
+
+
+
+
+
+
+
+
+

blk/260

@@ -2,7 +2,7 @@ Cross compilation program
 
 This programs allows cross compilation of boot binary and
 icore. Run "262 LOAD" right before your cross compilation and
-then "270 LOAD" to apply xcomp overrides.
+then set XCURRENT to CURRENT.
 
 This unit depends on a properly initialized z80a with ORG and
 BIN( set. That is how we determine compilation offsets.

blk/263

@@ -9,7 +9,6 @@ VARIABLE XCURRENT
 : XIMM XCON IMMEDIATE XCOFF ;
 : _xapply ( a -- a-off )
     DUP ORG @ > IF ORG @ - BIN( @ + THEN ;
-: X['] XCON ' _xapply LITA XCOFF ;
 : XCOMPILE
     XCON ' _xapply LITA
     LIT< , (find) DROP _xapply , XCOFF ;

blk/270

@@ -1,11 +0,0 @@
-: CODE XCODE ;
-: ['] X['] ; IMMEDIATE
-: COMPILE XCOMPILE ; IMMEDIATE
-: [COMPILE] X[COMPILE] ; IMMEDIATE
-: IMMEDIATE XIMM ;
-: (entry) (xentry) ;
-: CREATE XCREATE ;
-: : [ ' X: , ] ;
-
-CURRENT @ XCURRENT !
-

blk/350

@@ -13,4 +13,4 @@ ACIA_MEM: Address in memory that can be used variables shared
           with ACIA's native words. 8 bytes used.
 
 The whole driver is cross-compilable and is loaded with
-"582 LOAD"
+"352 LOAD"

blk/370

@@ -0,0 +1,3 @@
+SD Card driver
+
+Load range: 372-387

blk/405

@@ -1,4 +1,7 @@
-: WS? 33 < ;
+( The NOT is to normalize the negative/positive numbers to 1
+  or 0. Hadn't we wanted to normalize, we'd have written:
+  32 CMP 1 - )
+: WS? 33 CMP 1+ NOT ;
 
 : TOWORD
     BEGIN

blk/406

@@ -1,5 +1,5 @@
 ( Read word from C<, copy to WORDBUF, null-terminate, and
-  return WORDBUF. )
+  return, make HL point to WORDBUF. )
 : WORD
     0x0e RAM+  ( 0e == WORDBUF )
     TOWORD     ( a c )
@@ -8,7 +8,7 @@
           always zero to pre-write our null-termination )
         OVER ! 1+            ( a+1 )
         C<                   ( a c )
-        OVER 0x2d ( 2e-1 for NULL ) RAM+ = OVER WS? OR
+        DUP WS?
     UNTIL
     ( a this point, PS is: a WS )
     ( null-termination is already written )

blk/409

@@ -5,10 +5,10 @@
     NOT IF (parse) ELSE EXECUTE THEN
     C<? NOT IF LIT< (ok) (find) IF EXECUTE THEN THEN
     AGAIN ;
-
+XCURRENT @ _xapply ( to PSP )
 ( Drop RSP until I-2 == INTERPRET. )
 : EXIT!
-    ['] INTERPRET       ( I )
+    [ LITN ]            ( I, from PSP )
     BEGIN               ( I )
     DUP                 ( I I )
     R> DROP I 2- @      ( I I a )

blk/411

@@ -6,9 +6,10 @@
     0 0x55 RAM+ !  ( 55 == (key) override )
     0 0x0a RAM+ !  ( NLPTR )
     ( 0c == C<* )
-    ['] (boot<) 0x0c RAM+ !
+    LIT< (boot<) (find) DROP 0x0c RAM+ !
     ( boot< always has a char waiting. 06 == C<?* )
     1 0x06 RAM+ !
-    INTERPRET
+    LIT< INIT (find)
+    IF EXECUTE ELSE DROP INTERPRET THEN
 ;
 

blk/430

@@ -6,7 +6,7 @@
       the last typed 0x0a and one for the following NULL. )
     IN) IN> - 2+ ALLOT
     (infl)
-    ['] RDLN< 0x0c RAM+ !
+    LIT< RDLN< (find) DROP 0x0c RAM+ !
     1 0x06 RAM+ !  ( 06 == C<? )
 ;
 

blk/432

@@ -9,6 +9,7 @@
         EXIT!
     THEN
 ;
+XCURRENT @ _xapply ( to PSP, for LOAD )
 ( pre-comment for tight LOAD: The 0x08==I check after INTERPRET
   is to check whether we're restoring to "_", the word above.
   if yes, then we're in a nested load. Also, the 1 in 0x06 is

blk/433

@@ -5,7 +5,7 @@
     0x2e RAM+ @ >R  ( boot ptr )
     BLK@
     BLK( 0x2e RAM+ ! ( Point to beginning of BLK )
-    ['] _ 0x08 RAM+ ! 
+    [ LITN ( from PSP, B432 ) ]  0x08 RAM+ ! 
     1 0x06 RAM+ !  ( 06 == C<? )
     INTERPRET
     R> 0x2e RAM+ ! R> 0x06 RAM+ !

blk/439

@@ -1,14 +1,12 @@
-XPACKed core
+Core words
 
-Most of Collapse OS' core words are cross compiled (B390).
+These words follow cross-compiled words, but unlike them, these
-However, some of them are too dynamically referenced to be
+are self-bootstrapping and don't depend on the Cross Compiler.
-cross-compiled without great pain, so we XPACK (B267) them,
+They will typically be included in source form right after a
-that is, we put them in source form in the target's
+stage1 binary which will interpret it on boot and bootstrap
-initialization section (see B89).
+itself to a full intepreter, which can then be relinked with
+the Relinker. There is no loader for these libraries because
+you will typically XPACK (B267) them.
 
-These words will be compiled into RAM at initialization, which
+440 core                       447 readln                   
-is a bit wasteful both in RAM and in boot time, so we will
+453 blk
-typically relink (B120) that newly compiled binary and append
-it to our existing binary for optimal resource usage.
-
-Load range: 440-446

blk/480

@@ -3,4 +3,4 @@ AT28 Driver
 Write to an AT28 EEPROM while making sure that proper timing
 is followed and verify data integrity.
 
-Load with "591 LOAD"
+Load with "481 LOAD"

blk/580

@@ -1,7 +0,0 @@
-RC2014 Recipe
-
-Support code for the RC2014 recipe. Contains drivers for the
-ACIA, SD card and AT28 EEPROM.
-
-581 ACIA                       590 AT28 EEPROM
-600 SD card

blk/600

@@ -1,3 +0,0 @@
-SD Card driver
-
-Load range: 602-616

emul/stage1.fs

@@ -20,9 +20,9 @@
     RDLN$
     LIT< _sys [entry]
     ." Collapse OS" NL
+    INTERPRET
 ;
 
 (entry) _
-H@ 0x08 BIN+ ! ( update LATEST )
- ," INIT "
 H@ 256 /MOD 2 PC! 2 PC!
+H@ 0x08 BIN+ ! ( update LATEST )

emul/xcomp.fs

@@ -3,7 +3,14 @@
 0xfffa CONSTANT PS_ADDR
 212 LOAD  ( z80 assembler )
 262 LOAD  ( xcomp )
-270 LOAD  ( xcomp overrides )
+: CODE XCODE ;
+: COMPILE XCOMPILE ; IMMEDIATE
+: [COMPILE] X[COMPILE] ; IMMEDIATE
+: IMMEDIATE XIMM ;
+: (entry) (xentry) ;
+: : [ ' X: , ] ;
+
+CURRENT @ XCURRENT !
 
 282 LOAD  ( boot.z80 )
 393 LOAD  ( xcomp core low )

recipes/rc2014/eeprom/README.md

@@ -46,7 +46,7 @@ Addressed devices are at B140. To know what you have to paste, open the loader
 block (B142) and see what blocks it loads. For each of the blocks, copy/paste
 the code in your interpreter.
 
-Do the same thing with the AT28 driver (B590)
+Do the same thing with the AT28 driver (B480)
 
 If you're doing the real thing and not using the emulator, pasting so much code
 at once might freeze up the RC2014, so it is recommended that you use

recipes/rc2014/sdcard/README.md

@@ -72,13 +72,13 @@ instead.
 
 Your Collapse OS binary needs the SDC drivers which need to be inserted during
 Cross Compilation, which needs you need to recompile it from stage 1. First,
-look at B600. You'll see that it indicates a block range for the driver. That
+look at B370. You'll see that it indicates a block range for the driver. That
 needs to be loaded.
 
 Open xcomp.fs from base recipe and locate acia loading. You'll insert a line
 right after that that will look like:
 
-    602 616 LOADR  ( sdc )
+    372 387 LOADR  ( sdc )
 
 Normally, that's all you need to do. However, you have a little problem: You're
 busting the 8K ROM limit. But it's ok, you can remove the linker's XPACKing

recipes/rc2014/xcomp.fs

@@ -9,11 +9,19 @@
 RAMSTART 0x70 + CONSTANT ACIA_MEM
 212 LOAD  ( z80 assembler )
 262 LOAD  ( xcomp )
-270 LOAD  ( xcomp overrides )
+: CODE XCODE ;
+: COMPILE XCOMPILE ; IMMEDIATE
+: [COMPILE] X[COMPILE] ; IMMEDIATE
+: IMMEDIATE XIMM ;
+: (entry) (xentry) ;
+: CREATE XCREATE ;
+: : [ ' X: , ] ;
+
+CURRENT @ XCURRENT !
 
 282 LOAD  ( boot.z80 )
 393 LOAD  ( xcomp core low )
-582 LOAD  ( acia )
+352 LOAD  ( acia )
 420 LOAD  ( xcomp core high )
 (entry) _
 ( Update LATEST )

recipes/ti84/xcomp.fs

@@ -8,7 +8,13 @@ RAMSTART 0x72 + CONSTANT KBD_MEM
 : ZFILL, ( u ) 0 DO 0 A, LOOP ;
 262 LOAD  ( xcomp )
 522 LOAD  ( font compiler )
-270 LOAD  ( xcomp overrides )
+: CODE XCODE ;
+: COMPILE XCOMPILE ; IMMEDIATE
+: [COMPILE] X[COMPILE] ; IMMEDIATE
+: IMMEDIATE XIMM ;
+: (entry) (xentry) ;
+: CREATE XCREATE ; ( for KBD tbls )
+: : [ ' X: , ] ;
 
 ( TI-84+ requires specific code at specific offsets which
   come in conflict with Collapse OS' stable ABI. We thus

recipes/trs80/xcomp.fs

@@ -3,7 +3,14 @@
 RS_ADDR 0x80 - CONSTANT RAMSTART
 212 LOAD  ( z80 assembler )
 262 LOAD  ( xcomp )
-270 LOAD  ( xcomp overrides )
+: CODE XCODE ;
+: COMPILE XCOMPILE ; IMMEDIATE
+: [COMPILE] X[COMPILE] ; IMMEDIATE
+: IMMEDIATE XIMM ;
+: (entry) (xentry) ;
+: : [ ' X: , ] ;
+
+CURRENT @ XCURRENT !
 
 0x3000 BIN( !
 282 LOAD  ( boot.z80 )