ti84: fix glitches

blk/263

@@ -4,6 +4,7 @@ VARIABLE XCURRENT
 : XCOFF 0x02 RAM+ CURRENT* ! ;
 
 : (xentry) XCON (entry) XCOFF ;
+: XCREATE (xentry) 11 C, ;
 
 : XCODE XCON CODE XCOFF ;
 

blk/312

@@ -5,4 +5,11 @@ CODE 2DROP
     chkPS,
 ;CODE
 
+( a b -- a b a b )
+CODE 2DUP
+    HL POPqq, ( b ) DE POPqq, ( a )
+    chkPS,
+    DE PUSHqq, HL PUSHqq,
+    DE PUSHqq, HL PUSHqq,
+;CODE
 

blk/433

@@ -7,7 +7,6 @@
     SWAP DROP
 ;
 
-: 2DUP OVER OVER ;
 : 2OVER 3 PICK 3 PICK ;
 : 2SWAP 3 ROLL 3 ROLL ;
 

blk/550

@@ -3,4 +3,4 @@ TI-84+ Recipe
 Support code for the TI-84+ recipe. Contains drivers for the
 keyboard and LCD.
 
-551 LCD
+551 LCD                        564 Keyboard

blk/558

@@ -10,5 +10,5 @@
 ( Changes the current line and go back to leftmost column )
 : _lf
     LCD_CURY C@ FNTH 1+ + DUP 63 > IF DROP 0 THEN
-    DUP _clrln DUP FNTH 1+ _zoff!
+    DUP _clrln DUP FNTH 1+ + _zoff!
     LCD_CURY C! 0 LCD_CURX C! ;

blk/564

@@ -0,0 +1,16 @@
+Keyboard driver
+
+Low layer range: 566-569
+
+Implement a (key) word that interpret keystrokes from the
+builtin keyboard. The word waits for a digit to be pressed and
+returns the corresponding ASCII value.
+
+This routine waits for a key to be pressed, but before that, it
+waits for all keys to be de-pressed. It does that to ensure
+that two calls to _wait only go through after two actual key
+presses (otherwise, the user doesn't have enough time to
+de-press the button before the next _wait routine registers the
+same key press as a second one).
+
+                                                        (cont.)

blk/565

@@ -0,0 +1,6 @@
+Sending 0xff to the port resets the keyboard, and then we have
+to send groups we want to "listen" to, with a 0 in the group
+bit. Thus, to know if *any* key is pressed, we send 0xff to
+reset the keypad, then 0x00 to select all groups, if the result
+isn't 0xff, at least one key is pressed.
+

blk/566

@@ -0,0 +1,14 @@
+( Requires KBD_MEM, KBD_PORT )
+( gm -- pm, get pressed keys mask for group mask gm )
+CODE _get
+    HL POPqq,
+    chkPS,
+    DI,
+        A 0xff LDrn,
+        KBD_PORT OUTnA,
+        A L LDrr,
+        KBD_PORT OUTnA,
+        KBD_PORT INAn,
+    EI,
+    L A LDrr, HL PUSHqq,
+;CODE

blk/567

@@ -0,0 +1,16 @@
+( wait until all keys are de-pressed. To avoid repeat keys, we
+  require 64 subsequent polls to indicate all depressed keys.
+  all keys are considered depressed when the 0 group returns
+  0xff. )
+: _wait 64 BEGIN 0 _get 0xff = NOT IF DROP 64 THEN
+    1- DUP NOT UNTIL DROP ;
+( digits table. seach row represents a group. 0 means
+  unsupported. no group 7 because it has no key. )
+CREATE _dtbl
+    0 C, 0 C, 0 C, 0 C, 0 C, 0 C, 0 C, 0 C,
+    0xd C, '+' C, '-' C, '*' C, '/' C, '^' C, 0 C, 0 C,
+    0 C, '3' C, '6' C, '9' C, ')' C, 0 C, 0 C, 0 C,
+    '.' C, '2' C, '5' C, '8' C, '(' C, 0 C, 0 C, 0 C,
+    '0' C, '1' C, '4' C, '7' C, ',' C, 0 C, 0 C, 0 C,
+    0 C, 0 C, 0 C, 0 C, 0 C, 0 C, 0 C, 0x80 ( alpha ) C,
+    0 C, 0 C, 0 C, 0 C, 0 C, 0x81 ( 2nd ) C, 0 C, 0x7f C,

blk/568

@@ -0,0 +1,9 @@
+( alpha table. same as _dtbl, for when we're in alpha mode. )
+CREATE _atbl
+    0 C, 0 C, 0 C, 0 C, 0 C, 0 C, 0 C, 0 C,
+    0xd C, '"' C, 'w' C, 'r' C, 'm' C, 'h' C, 0 C, 0 C,
+    '?' C, 0 C, 'v' C, 'q' C, 'l' C, 'g' C, 0 C, 0 C,
+    ':' C, 'z' C, 'u' C, 'p' C, 'k' C, 'f' C, 'c' C, 0 C,
+    0x20 C, 'y' C, 't' C, 'o' C, 'j' C, 'e' C, 'b' C, 0 C,
+    0 C, 'x' C, 's' C, 'n' C, 'i' C, 'd' C, 'a' C, 0x80 C,
+    0 C, 0 C, 0 C, 0 C, 0 C, 0x81 ( 2nd ) C, 0 C, 0x7f C,

blk/569

@@ -0,0 +1,13 @@
+: _
+    0 ( gid ) 0 ( dummy )
+    BEGIN ( loop until a digit is pressed )
+        DROP
+        1+ DUP 7 = IF DROP 0 THEN ( inc gid )
+        1 OVER LSHIFT 0xff -^ ( group dmask ) _get
+    DUP 0xff = NOT UNTIL
+    ( gid dmask )
+    0xff XOR ( dpos ) 0 ( dindex )
+    BEGIN 1+ 2DUP RSHIFT NOT UNTIL 1-
+    ( gid dpos dindex ) SWAP DROP
+    ( gid dindex ) SWAP 8 * + _dtbl + C@ _wait ;
+: (key) 0 ( dummy ) BEGIN DROP _ DUP UNTIL ;

emul/hw/ti/ti84.c

@@ -21,7 +21,7 @@
 #define INTERRUPT_PORT 0x03
 #define LCD_CMD_PORT 0x10
 #define LCD_DATA_PORT 0x11
-#define MAX_ROMSIZE 0x2000
+#define MAX_ROMSIZE 0x4000
 
 static xcb_connection_t    *conn;
 static xcb_screen_t        *screen;

recipes/ti84/xcomp.fs

@@ -1,27 +1,30 @@
 0x8000 CONSTANT RAMSTART
 0xb000 CONSTANT RS_ADDR
 RAMSTART 0x70 + CONSTANT LCD_MEM
+0x01 CONSTANT KBD_PORT
 212 LOAD  ( z80 assembler )
 262 LOAD  ( xcomp )
 522 LOAD  ( font compiler )
 : CODE XCODE ;
 : IMMEDIATE XIMM ;
 : (entry) (xentry) ;
+: CREATE XCREATE ; ( for KBD tbls )
 : : [ ' X: , ] ;
 
 CURRENT @ XCURRENT !
 
 282 LOAD  ( boot.z80 )
 393 LOAD  ( icore low )
-555 557 LOADR ( ti low )
+555 557 LOADR ( LCD low )
+566 569 LOADR ( KBD low )
 415 LOAD  ( icore high )
 (entry) ~FNT CPFNT3x5
 (entry) _
 ( Update LATEST )
 PC ORG @ 8 + !
 422 437 XPACKR ( core )
-558 560 XPACKR ( ti high )
+558 560 XPACKR ( LCD high )
-438 446 XPACKR ( print fmt )
+438 451 XPACKR ( print fmt readln )
-," : _ LCD$ LIT< Hello (print) LIT< World! (print) BYE ; _ "
+," : _ LCD$ (ok) RDLN$ ; _ "
 ORG @ 256 /MOD 2 PC! 2 PC!
 H@ 256 /MOD 2 PC! 2 PC!