drv/acia.fs

@@ -29,7 +29,7 @@ ACIA_MEM: Address in memory that can be used variables shared
 
 : ACIA$
     H@ DUP DUP ACIA( ! ACIAR> !
-    1+ ACIAW> !  ( write index starts one position later )
+    1+ ACIAW> ! ( write index starts one position later )
     ACIABUFSZ ALLOT
     H@ ACIA) !
 ( setup ACIA
@@ -42,7 +42,7 @@ ACIA_MEM: Address in memory that can be used variables shared
 
 ( setup interrupt )
     ( 4e == INTJUMP )
-    0xc3 0x4e RAM+ C!  ( JP upcode )
+    0xc3 0x4e RAM+ C! ( JP upcode )
     ['] ~ACIA 0x4f RAM+ !
     (im1)
 ;

emul/hw/rc2014/Makefile

@@ -1,5 +1,5 @@
 EXTOBJS = ../../emul.o ../../libz80/libz80.o
-OBJS = acia.o sdc.o classic.o 
+OBJS = acia.o classic.o 
 TARGET = classic
 
 .PHONY: all

emul/hw/rc2014/classic.c

@@ -13,18 +13,13 @@
 #include <termios.h>
 #include "../../emul.h"
 #include "acia.h"
-#include "sdc.h"
 
 #define RAMSTART 0x8000
 #define ACIA_CTL_PORT 0x80
 #define ACIA_DATA_PORT 0x81
-#define SDC_CSHIGH 0x06
-#define SDC_CSLOW 0x05
-#define SDC_SPI 0x04
 #define MAX_ROMSIZE 0x2000
 
 static ACIA acia;
-static SDC sdc;
 
 static uint8_t iord_acia_ctl()
 {
@@ -46,30 +41,10 @@ static void iowr_acia_data(uint8_t val)
     acia_data_wr(&acia, val);
 }
 
-static uint8_t iord_sdc_spi()
-{
-    return sdc_spi_rd(&sdc);
-}
-
-static void iowr_sdc_spi(uint8_t val)
-{
-    sdc_spi_wr(&sdc, val);
-}
-
-static void iowr_sdc_cshigh(uint8_t val)
-{
-    sdc_cshigh(&sdc);
-}
-
-static void iowr_sdc_cslow(uint8_t val)
-{
-    sdc_cslow(&sdc);
-}
-
 int main(int argc, char *argv[])
 {
-    if (argc < 2) {
-        fprintf(stderr, "Usage: ./classic /path/to/rom [sdcard.img]\n");
+    if (argc != 2) {
+        fprintf(stderr, "Usage: ./classic /path/to/rom\n");
         return 1;
     }
     FILE *fp = fopen(argv[1], "r");
@@ -106,19 +81,10 @@ int main(int argc, char *argv[])
     }
 
     acia_init(&acia);
-    sdc_init(&sdc);
-    if (argc == 3) {
-        fprintf(stderr, "Setting up SD card image\n");
-        sdc.fp = fopen(argv[2], "r+");
-    }
     m->iord[ACIA_CTL_PORT] = iord_acia_ctl;
     m->iord[ACIA_DATA_PORT] = iord_acia_data;
     m->iowr[ACIA_CTL_PORT] = iowr_acia_ctl;
     m->iowr[ACIA_DATA_PORT] = iowr_acia_data;
-    m->iord[SDC_SPI] = iord_sdc_spi;
-    m->iowr[SDC_SPI] = iowr_sdc_spi;
-    m->iowr[SDC_CSHIGH] = iowr_sdc_cshigh;
-    m->iowr[SDC_CSLOW] = iowr_sdc_cslow;
 
     char tosend = 0;
     while (emul_step()) {
@@ -160,8 +126,5 @@ int main(int argc, char *argv[])
         tcsetattr(0, TCSADRAIN, &saved_term);
         emul_printdebug();
     }
-    if (sdc.fp) {
-        fclose(sdc.fp);
-    }
     return 0;
 }

emul/hw/rc2014/sdc.c

@@ -1,206 +0,0 @@
-#include <stdio.h>
-#include "sdc.h"
-
-// Add data to crc with polynomial 0x1021
-// https://stackoverflow.com/a/23726131
-static uint16_t crc16(uint16_t crc, uint8_t data)
-{
-    uint8_t x = crc >> 8 ^ data;
-    x ^= x>>4;
-    crc = (crc << 8) ^ ((uint16_t)(x << 12)) ^ ((uint16_t)(x <<5)) ^ ((uint16_t)x);
-    return crc;
-}
-
-void sdc_init(SDC *sdc)
-{
-    sdc->selected = false;
-    sdc->initstat = 0;
-    sdc->recvidx = 0;
-    sdc->sendidx = -1;
-    sdc->resp = 0xff;
-    sdc->fp = NULL;
-    sdc->cmd17bytes = -1;
-    sdc->cmd24bytes = -2;
-}
-
-void sdc_cslow(SDC *sdc)
-{
-    sdc->selected = true;
-}
-
-void sdc_cshigh(SDC *sdc)
-{
-    sdc->selected = false;
-}
-
-void sdc_spi_wr(SDC *sdc, uint8_t val)
-{
-    if (!sdc->selected) {
-        return;
-    }
-    sdc->resp = 0xff;
-    if (sdc->initstat < 8) {
-        // not woken yet.
-        sdc->initstat++;
-        return;
-    }
-    if (sdc->sendidx >= 0) {
-        sdc->resp = sdc->sendbuf[sdc->sendidx++];
-        if (sdc->sendidx == 5) {
-            sdc->sendidx = -1;
-        }
-        return;
-    }
-    if (sdc->cmd17bytes >= 0) {
-        if (sdc->fp) {
-            sdc->resp = getc(sdc->fp);
-        }
-        sdc->crc16 = crc16(sdc->crc16, sdc->resp);
-        sdc->cmd17bytes++;
-        if (sdc->cmd17bytes == 512) {
-            sdc->sendbuf[3] = sdc->crc16 >> 8;
-            sdc->sendbuf[4] = sdc->crc16 & 0xff;
-            sdc->sendidx = 3;
-            sdc->cmd17bytes = -1;
-        }
-        return;
-    }
-    if (sdc->cmd24bytes == -1) {
-        if (val == 0xff) {
-            // it's ok to receive idle bytes before the data token.
-            return;
-        }
-        if (val == 0xfe) {
-            // data token, good
-            sdc->cmd24bytes = 0;
-        } else {
-            // something is wrong, cancel cmd24
-            sdc->cmd24bytes = -2;
-        }
-        return;
-    }
-    if (sdc->cmd24bytes >= 0) {
-        if (sdc->cmd24bytes < 512) {
-            if (sdc->fp) {
-                putc(val, sdc->fp);
-            }
-            sdc->crc16 = crc16(sdc->crc16, val);
-        } else if (sdc->cmd24bytes == 512) {
-            // CRC MSB
-            if (val == (sdc->crc16>>8)) {
-                fprintf(stderr, "Good CRC16 MSB\n");
-            } else {
-                fprintf(stderr, "Bad CRC16 MSB\n");
-            }
-        } else {
-            if (val == (sdc->crc16&0xff)) {
-                fprintf(stderr, "Good CRC16 LSB\n");
-            } else {
-                fprintf(stderr, "Bad CRC16 LSB\n");
-            }
-            // valid response for CMD24
-            sdc->sendbuf[4] = 0x05;
-            sdc->sendidx = 4;
-            sdc->cmd24bytes = -3;
-        }
-        sdc->cmd24bytes++;
-        return;
-    }
-    if ((sdc->recvidx == 0) && ((val > 0x7f) || (val < 0x40))) {
-        // not a command
-        return;
-    }
-    sdc->recvbuf[sdc->recvidx++] = val;
-    if (sdc->recvidx < 6) {
-        // incomplete command
-        return;
-    }
-    // Command complete
-    val &= 0x3f;
-    sdc->recvidx = 0;
-    uint8_t *b = sdc->recvbuf;
-    uint8_t cmd = b[0] & 0x3f;
-    uint16_t arg1 = (b[1] << 8) | b[2];
-    uint16_t arg2 = (b[3] << 8) | b[4];
-    if (sdc->initstat == 8) {
-        // At this stage, we're expecting CMD0
-        if (cmd == 0) {
-            sdc->initstat++;
-            sdc->sendbuf[4] = 0x01;
-            sdc->sendidx = 4;
-        }
-        return;
-    }
-    if (sdc->initstat == 9) {
-        // At this stage, we're expecting CMD8 with 0x1aa arg2
-        if ((cmd == 8) && (arg2 == 0x01aa)) {
-            sdc->initstat++;
-            sdc->sendbuf[0] = 0x01;
-            sdc->sendbuf[1] = 0;
-            sdc->sendbuf[2] = 0;
-            sdc->sendbuf[3] = 0x01;
-            sdc->sendbuf[4] = 0xaa;
-            sdc->sendidx = 0;
-        } else {
-            sdc-> initstat = 8;
-        }
-        return;
-    }
-    if (sdc->initstat == 10) {
-        // At this stage, we're expecting CMD55
-        if (cmd == 55) {
-            sdc->initstat++;
-            sdc->sendbuf[4] = 0x01;
-            sdc->sendidx = 4;
-        } else {
-            sdc->initstat = 8;
-        }
-        return;
-    }
-    if (sdc->initstat == 11) {
-        // At this stage, we're expecting CMD41
-        if ((cmd == 41) && (arg1 == 0x4000)) {
-            sdc->initstat++;
-            sdc->sendbuf[4] = 0x00;
-            sdc->sendidx = 4;
-        } else {
-            sdc->initstat = 8;
-        }
-        return;
-    }
-    // We have a fully initialized card.
-    if (cmd == 17) {
-        if (sdc->fp) {
-            fseek(sdc->fp, arg2*512, SEEK_SET);
-        }
-        sdc->sendbuf[3] = 0x00;
-        // data token
-        sdc->sendbuf[4] = 0xfe;
-        sdc->sendidx = 3;
-        sdc->cmd17bytes = 0;
-        sdc->crc16 = 0;
-        return;
-    }
-    if (cmd == 24) {
-        fprintf(stderr, "cmd24\n");
-        if (sdc->fp) {
-            fseek(sdc->fp, arg2*512, SEEK_SET);
-        }
-        sdc->sendbuf[4] = 0x00;
-        sdc->sendidx = 4;
-        sdc->cmd24bytes = -1;
-        sdc->crc16 = 0;
-        return;
-    }
-    // Simulate success for any unknown command.
-    sdc->sendbuf[4] = 0x00;
-    sdc->sendidx = 4;
-}
-
-uint8_t sdc_spi_rd(SDC *sdc)
-{
-    if (!sdc->selected) {
-        return 0xff;
-    }
-    return sdc->resp;
-}

emul/hw/rc2014/sdc.h

@@ -1,37 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-
-typedef struct {
-    bool selected;
-    // Initialization status. 0 == not woken 8 == woken 9 == CMD0 received
-    // 10 == CMD8 received, 11 == CMD55 received, 12 == CMD41 received (fully
-    // initialized).
-    unsigned int initstat;
-    // We receive commands into this buffer.
-    uint8_t recvbuf[6];
-    // Where the next SPI byte should be stored in recvbuf.
-    unsigned int recvidx;
-    // Buffer to the arguments for a response
-    uint8_t sendbuf[5];
-    // Index of the next byte from sendbuf we should return. If -1, buffer is
-    // empty.
-    int sendidx;
-    // One byte response. When all other response buffers are empty, return
-    // this.
-    uint8_t resp;
-    // File used for contents read/write
-    FILE *fp;
-    // number of bytes read into the current CMD17. -1 means no CMD17 active.
-    int cmd17bytes;
-    // number of bytes received for the current CMD24. -2 means no CMD24 active.
-    // -1 means we're still waiting for the data token.
-    int cmd24bytes;
-    // running crc16 during read and write operations.
-    uint16_t crc16;
-} SDC;
-
-void sdc_init(SDC *sdc);
-void sdc_cslow(SDC *sdc);
-void sdc_cshigh(SDC *sdc);
-void sdc_spi_wr(SDC *sdc, uint8_t val);
-uint8_t sdc_spi_rd(SDC *sdc);

forth/fmt.fs

@@ -15,7 +15,7 @@
     DUP <0 IF '-' EMIT -1 * THEN
     _
     BEGIN
-    DUP '9' > IF DROP EXIT THEN  ( stop indicator, we're done )
+    DUP '9' > IF DROP EXIT THEN ( stop indicator, we're done )
     EMIT
     AGAIN
 ;
@@ -32,7 +32,7 @@
 : .x
     256 MOD     ( ensure < 0x100 )
     16 /MOD     ( l h )
-    _ EMIT      ( l )
+    _ EMIT ( l )
     _ EMIT
 ;
 

forth/link.fs

@@ -33,7 +33,7 @@
     0x22 = NOT IF 2+ EXIT THEN
     ( it's a lit, skip to null char )
     ( a )
-    1+  ( we skip by 2, but the loop below is pre-inc... )
+    1+ ( we skip by 2, but the loop below is pre-inc... )
     BEGIN 1+ DUP C@ NOT UNTIL
     ( skip null char )
     1+
@@ -58,17 +58,17 @@
         )
         DROP
         2+          ( o ol a+2 )
-        ROT ROT 2DROP  ( a )
+        ROT ROT 2DROP ( a )
         EXIT
     THEN
     ROT             ( o a n ol )
-    < IF  ( under limit, do nothing )
+    < IF ( under limit, do nothing )
         SWAP DROP    ( a )
     ELSE
         ( o a )
-        SWAP OVER @  ( a o n )
-        -^           ( a n-o )
-        OVER !       ( a )
+        SWAP OVER @ ( a o n )
+        -^          ( a n-o )
+        OVER !      ( a )
     THEN
     ASKIP
 ;

recipes/rc2014/eeprom/Makefile

@@ -0,0 +1,11 @@
+TARGET = os.bin
+BASEDIR = ../../..
+ZASM = $(BASEDIR)/emul/zasm/zasm
+KERNEL = $(BASEDIR)/kernel
+APPS = $(BASEDIR)/apps
+
+.PHONY: all
+all: $(TARGET)
+$(TARGET): glue.asm
+	$(ZASM) $(KERNEL) $(APPS) < glue.asm > $@
+

recipes/rc2014/eeprom/glue.asm

@@ -0,0 +1,87 @@
+; classic RC2014 setup (8K ROM + 32K RAM) and a stock Serial I/O module
+; The RAM module is selected on A15, so it has the range 0x8000-0xffff
+.equ	RAMSTART	0x8000
+.equ	RAMEND		0xffff
+.equ	ACIA_CTL	0x80	; Control and status. RS off.
+.equ	ACIA_IO		0x81	; Transmit. RS on.
+
+jp	init
+
+; interrupt hook
+.fill	0x38-$
+jp	aciaInt
+
+.inc "err.h"
+.inc "ascii.h"
+.inc "blkdev.h"
+.inc "core.asm"
+.inc "str.asm"
+.equ	ACIA_RAMSTART	RAMSTART
+.inc "acia.asm"
+
+.equ	MMAP_START	0xd000
+.inc "mmap.asm"
+
+.equ	BLOCKDEV_RAMSTART	ACIA_RAMEND
+.equ	BLOCKDEV_COUNT		1
+.inc "blockdev.asm"
+; List of devices
+.dw	mmapGetB, mmapPutB
+
+.equ	STDIO_RAMSTART	BLOCKDEV_RAMEND
+.equ	STDIO_GETC	aciaGetC
+.equ	STDIO_PUTC	aciaPutC
+.inc "stdio.asm"
+
+.equ	AT28W_RAMSTART	STDIO_RAMEND
+.inc "at28w/main.asm"
+
+; *** BASIC ***
+
+; RAM space used in different routines for short term processing.
+.equ	SCRATCHPAD_SIZE	STDIO_BUFSIZE
+.equ	SCRATCHPAD	AT28W_RAMEND
+.inc "lib/util.asm"
+.inc "lib/ari.asm"
+.inc "lib/parse.asm"
+.inc "lib/fmt.asm"
+.equ	EXPR_PARSE	parseLiteralOrVar
+.inc "lib/expr.asm"
+.inc "basic/util.asm"
+.inc "basic/parse.asm"
+.inc "basic/tok.asm"
+.equ	VAR_RAMSTART	SCRATCHPAD+SCRATCHPAD_SIZE
+.inc "basic/var.asm"
+.equ	BUF_RAMSTART	VAR_RAMEND
+.inc "basic/buf.asm"
+.inc "basic/blk.asm"
+.equ	BAS_RAMSTART	BUF_RAMEND
+.inc "basic/main.asm"
+
+init:
+	di
+	; setup stack
+	ld	sp, RAMEND
+	im 1
+
+	call	aciaInit
+	xor	a
+	ld	de, BLOCKDEV_SEL
+	call	blkSel
+
+	call	basInit
+	ld	hl, basFindCmdExtra
+	ld	(BAS_FINDHOOK), hl
+	ei
+	jp	basStart
+
+basFindCmdExtra:
+	ld	hl, basBLKCmds
+	call	basFindCmd
+	ret	z
+	ld	hl, .mycmds
+	jp	basFindCmd
+.mycmds:
+	.db "at28w", 0
+	.dw at28wMain
+	.db 0xff

recipes/rc2014/eeprom/usr.asm

@@ -0,0 +1,43 @@
+; If you find youself needing to write to an EEPROM through a shell that isn't
+; built for this, compile this dependency-less code (change memory offsets as
+; needed) and run it in a USR-like fashion.
+
+	ld	bc, 0x1000	; bytecount to write
+	ld	de, 0xd000	; source data
+	ld	hl, 0x2000	; dest EEPROM memory mapping
+
+loop:
+	ld	a, (de)
+	ld	(hl), a
+	push	de		; --> lvl 1
+	push	bc		; --> lvl 2
+	ld	bc, 0x2000	; Should be plenty enough to go > 10ms
+	ld	e, a		; save expected data for verification
+wait:
+	; as long as writing operation is running, IO/6 will toggle at each
+	; read attempt and IO/7 will be the opposite of what was written. Simply
+	; wait until the read operation yields the same value as what we've
+	; written
+	ld	a, (hl)
+	cp	e
+	jr	z, waitend
+	dec	bc
+	ld	a, b
+	or	c
+	jr	nz, wait
+	; mismatch
+	pop	bc		; <-- lvl 2
+	pop	de		; <-- lvl 1
+	ld	a, 1		; nonzero
+	or	a		; unset Z
+	ret
+waitend:
+	pop	bc		; <-- lvl 2
+	pop	de		; <-- lvl 1
+	inc	hl
+	inc	de
+	dec	bc
+	ld	a, b
+	or	c
+	jr	nz, loop
+	ret			; Z already set