blk/058

@@ -4,9 +4,10 @@ LIT    --         Write a LIT entry. You're expected to write
                   actual string to HERE right afterwards.
 LIT< x --         Read following word and write to HERE as a
                   string literal.
+LITS   a --       Write word at addr a as a atring literal.
 S=     a1 a2 -- f Returns whether string a1 == a2.
-SCPY   a --       Copy string at addr a into HERE, without
+SCPY   a --       Copy string at addr a into HERE.
-                  NULL termination.
+
 
 
 

blk/208

@@ -8,9 +8,9 @@ LD [rr, rn, ddnn, (nn)HL, HL(nn), dd(nn), (nn)dd, rIXY, IXYr,
     (DE)A, A(DE)]
 ADD [r, n, HLss, IXss, IXIX, IYss, IYIY]
 ADC [r, HLss]
-CP  [r, n, (IXY+)]
+CP  [r, n]
 SBC [r, HLss]
 SUB [r, n]
 PUSH [qq]  POP [qq]
-INC [r, ss, (IXY+)]    DEC [r, ss, (IXY+)]
+INC [r, ss]            DEC [r, ss]
 AND [r, n] OR [r, n]   XOR [r, n]                       (cont.)

blk/218

@@ -8,5 +8,3 @@
     OR A,
 ;
 0x04 OP1r INCr,                0x05 OP1r DECr,
-: INC(IXY+), INCr, A, ;
-: DEC(IXY+), DECr, A, ;

blk/219

@@ -11,4 +11,3 @@
 0xa0 OP1r0 ANDr,               0xb8 OP1r0 CPr,
 0xb0 OP1r0 ORr,                0x90 OP1r0 SUBr,
 0x98 OP1r0 SBCr,               0xa8 OP1r0 XORr,
-: CP(IXY+), CPr, A, ;

blk/268

@@ -8,7 +8,7 @@
             DUP LIT< ( S= IF
                 DROP [COMPILE] (
             ELSE
-                SCPY 0x20 C,
+                SCPY 0x20 H@ 1- C!
             THEN 0 ( loop again )
         ELSE 1 ( stop looping ) THEN
     UNTIL

blk/284

@@ -9,8 +9,4 @@ H@ XCURRENT !        ( set current tip of dict, 0x42 )
     0x14 BCALL,      ( popRS )
     HL PUSHqq, IY POPqq, ( --> IP )
     JPNEXT,
-CODE (br)            ( 0x53 )
+
-L2 BSET ( used in CBR )
-    E 0 IY+ LDrIXY, D 1 IY+ LDrIXY,
-    DE ADDIYss,
-    JPNEXT,

blk/285

@@ -1,15 +1,6 @@
-CODE (?br)           ( 0x67 )
+CODE (br)            ( 0x53 )
-    HL POPqq, chkPS,
+L2 BSET ( used in CBR )
-    HLZ,
+    E 0 IY+ LDrIXY,
-    JRZ, L2 BWR ( BR + 2. False, branch )
+    D 1 IY+ LDrIXY,
-    L1 BSET ( loop will jump here )
+    DE ADDIYss,
-    ( True, skip next 2 bytes and don't branch )
-    IY INCss, IY INCss,
     JPNEXT,
-CODE (loop) ( 0x77 )
-    0 IX+ INC(IXY+), IFZ, 1 IX+ INC(IXY+), THEN, ( I++ )
-    ( Jump if I <> I' )
-    A 0 IX+ LDrIXY, 2 IX- CP(IXY+), JRNZ, L2 BWR ( branch )
-    A 1 IX+ LDrIXY, 1 IX- CP(IXY+), JRNZ, L2 BWR ( branch )
-    ( don't branch )
-    IX DECss, IX DECss, IX DECss, IX DECss, JR, L1 BWR

blk/286

@@ -1,16 +1,12 @@
-CODE >R ( 0xa8 )
+CODE (?br)           ( 0x67 )
-    HL POPqq, chkPS,
+    HL POPqq,
-    17 BCALL, ( 17 == pushRS )
+    chkPS,
-;CODE
+    HLZ,
-CODE 2>R ( 0xb9 )
+    JRZ, L2 BWR ( BR + 2. False, branch )
-    DE POPqq, HL POPqq, chkPS,
+    ( True, skip next 2 bytes and don't branch )
-    17 BCALL, ( 17 == pushRS ) EXDEHL, 17 BCALL,
+    IY INCss,
-;CODE
+    IY INCss,
-CODE R> ( 0xce )
+    JPNEXT,
-    20 BCALL, ( 20 == popRS )
+
-    HL PUSHqq,
+( END OF STABLE ABI )
-;CODE
+
-CODE 2R> ( 0xdc )
-    20 BCALL, ( 20 == popRS ) EXDEHL, 20 BCALL,
-    HL PUSHqq, DE PUSHqq,
-;CODE ( END OF STABLE ABI )

blk/288

@@ -1,4 +1,4 @@
-PC ORG @ 0x22 + ! ( litWord, 0xf7, very tight on the 0x100 limit )
+PC ORG @ 0x22 + ! ( litWord )
 ( Like numberWord, but instead of being followed by a 2 bytes
   number, it's followed by a null-terminated string. When
   called, puts the string's address on PS )

blk/326

@@ -0,0 +1,17 @@
+CODE >R
+    HL POPqq, chkPS,
+    17 BCALL, ( 17 == pushRS )
+;CODE
+CODE 2>R
+    DE POPqq, HL POPqq, chkPS,
+    17 BCALL, ( 17 == pushRS ) EXDEHL, 17 BCALL,
+;CODE
+CODE R>
+    20 BCALL, ( 20 == popRS )
+    HL PUSHqq,
+;CODE
+CODE 2R>
+    20 BCALL, ( 20 == popRS ) EXDEHL, 20 BCALL,
+    HL PUSHqq, DE PUSHqq,
+;CODE
+

blk/391

@@ -9,8 +9,8 @@ unusable directly. For the same reason, any reference to a word
 in the host system will obviously be wrong in the target
 system. More details in B260.
 
-These rules result in some practicals do's and dont's:
+This unit is loaded in two "low" and "high" parts. The low part
-
+is the biggest chunk and has the most definitions. The high
-1. No LEAVE in DO..LOOP
+part is the "sensitive" chunk and contains "LITN", ":" and ";"
-
+definitions which, once defined, kind of make any more defs
-                                                        (cont.)
+impossible.                                             (cont.)

blk/392

@@ -1,9 +1,3 @@
-This unit is loaded in two "low" and "high" parts. The low part
-is the biggest chunk and has the most definitions. The high
-part is the "sensitive" chunk and contains "LITN", ":" and ";"
-definitions which, once defined, kind of make any more defs
-impossible.
-
 The gap between these 2 parts is the ideal place to put device
 driver code. Load the low part with "393 LOAD", the high part
 with "415 LOAD"

blk/407

@@ -1,6 +1,10 @@
 : SCPY
     BEGIN         ( a )
-        C@+   ( a+1 c )
+        DUP C@    ( a c )
-        DUP NOT IF 2DROP EXIT THEN
+        DUP C,    ( a c )
-        C,    ( a c )
+        NOT IF DROP EXIT THEN
-    AGAIN ;
+        1+        ( a+1 )
+    AGAIN
+;
+
+

blk/408

@@ -1,10 +1,14 @@
 : [entry]
     HERE @       ( w h )
     SWAP SCPY    ( h )
-    HERE @ SWAP - ( sz )
+    ( Adjust HERE -1 because SCPY copies the null )
+    HERE @ 1-    ( h h' )
+    DUP HERE !   ( h h' )
+    SWAP -       ( sz )
     ( write prev value )
     HERE @ CURRENT @ - ,
-    C, ( write size )
+    ( write size )
+    C,
     HERE @ CURRENT !
 ;
 

blk/412

@@ -1,6 +1,3 @@
-( Words here until the end of the low part, unlike words
-  preceeding them, aren't immediately needed for boot. But its
-  better to have as many words as possible in the xcomp part. )
 : H@ HERE @ ;
 : IMMEDIATE
     CURRENT @ 1-
@@ -8,8 +5,4 @@
 ;
 : +! SWAP OVER @ + SWAP ! ;
 : -^ SWAP - ;
-: / /MOD SWAP DROP ;
-: MOD /MOD DROP ;
-
 : ALLOT HERE +! ;
-: CREATE (entry) 11 ( 11 == cellWord ) C, ;

blk/422

@@ -1,6 +1,7 @@
 : [ INTERPRET ; IMMEDIATE
 : ] R> DROP ;
-: LIT< WORD 34 , SCPY 0 C, ; IMMEDIATE
+: LITS 34 , SCPY ;
+: LIT< WORD LITS ; IMMEDIATE
 : LITA 36 , , ;
 : '? WORD (find) ;
 : '

blk/424

@@ -7,7 +7,7 @@
 
   40 is ASCII for '('. We do this to simplify XPACK's task of
   not mistakenly consider '(' definition as a comment.
-  LIT<: 34 == litWord
+  LITS: 34 == litWord
   LITA: 36 == addrWord
   COMPILE: Tough one. Get addr of caller word (example above
   (br)) and then call LITA on it. )

blk/429

@@ -0,0 +1,7 @@
+: CREATE
+    (entry)            ( empty header with name )
+    11                 ( 11 == cellWord )
+    C,                 ( write it )
+;
+
+

blk/431

@@ -1,8 +1,10 @@
 : VARIABLE CREATE 2 ALLOT ;
 : CONSTANT CREATE , DOES> @ ;
+: / /MOD SWAP DROP ;
+: MOD /MOD DROP ;
 
 ( In addition to pushing H@ this compiles 2>R so that loop
   variables are sent to PS at runtime )
 : DO COMPILE 2>R H@ ; IMMEDIATE
-: LOOP COMPILE (loop) H@ - , ; IMMEDIATE
+
-: LEAVE R> R> DROP I 1- >R >R ;
+

blk/432

@@ -0,0 +1,16 @@
+( Increase loop counter and returns whether we should loop. )
+: _
+    R>          ( IP, keep for later )
+    R> 1+       ( ip i+1 )
+    DUP >R      ( ip i )
+    I' =        ( ip f )
+    SWAP >R     ( f )
+;
+( One could think that we should have a sub word to avoid all
+  these COMPILE, but we can't because otherwise it messes with
+  the RS )
+: LOOP
+    COMPILE _ COMPILE (?br)
+    H@ - ,
+    COMPILE 2R> COMPILE 2DROP
+; IMMEDIATE

blk/433

@@ -1,3 +1,5 @@
+: LEAVE R> R> DROP I 1- >R >R ;
+
 : ROLL
     DUP NOT IF EXIT THEN
     1+ DUP PICK          ( n val )