I could drive my RC2014 from my TRS-80 4P (using the Remote Shell
coming in the next commit)! A challenge I faced was that the RC2014
spits characters too fast and the CTS line of its ACIA modules
(both the 6850 and SIO/2 ones) are hard-wired to ground, making
flow control difficult. I solved this, for now, by lowering comm
speed.
This driver improvement makes CL<? faster and makes baud rate
configurable in CL$.
The buffer's implementation wasn't buying us much in exchange for its
complexity. A modern machine was still too fast for it (copy/pasting
text from a modern machine would send bytes too fast for the RC2014)
and in the (theoretical so far) case of COS-to-COS communication, the
buffer didn't help in cases where the baud rate was faster than the
processing of each byte received (for example, if the byte was written
directly to EEPROM).
I'm scrapping it and, instead, use the RTS flag to signal the other
side when we're ready to receive a new byte.
Also, implement driver for channel B in SIO. I will need it to talk
to my TRS-80 4P.
Virgil Dupras