izaya/collapseos
1
0
Fork 0
mirror of https://github.com/hsoft/collapseos.git synced 2024-11-27 12:18:07 +11:00
Code Issues Releases Wiki Activity

rc2014: separate SPI relay and SDC drivers

Browse Source 
My intention is to reuse the SPI relay to program AVR MCUs from a
RC2014.
This commit is contained in:
Virgil Dupras 2020-06-29 18:48:00 -04:00
parent 1ac7038863
commit f09aa0603c
15 changed files with 55 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
blk/580
View File

@ -4,4 +4,5 @@ Support code for the RC2014 recipe. Contains drivers for the
ACIA, SD card and AT28 EEPROM.
581 ACIA 590 AT28 EEPROM
600 SD card 618 Xcomp unit
595 SPI relay 600 SD card
618 Xcomp unit

12
blk/595 Normal file
View File

@ -0,0 +1,12 @@
SPI relay driver
This driver is designed for a ad-hoc adapter card that acts as a
SPI relay between the z80 bus and the SPI device. Sending any-
thing on SPI_CSLOW and SPI_CSHIGH is expected to select/deselect
the device, and writing to SPI_DATA is expected to initiate a
byte exchange. The result of the exchange is excpected to be re-
trieved by reading SPI_DATA.
Provides (spie) (enable), (spid) (disable), (spix) (xchange).
Load driver with "596 LOAD".

12
blk/596 Normal file
View File

@ -0,0 +1,12 @@
CODE (spix) ( n -- n )
HL POP,
chkPS,
A L LDrr,
SPI_DATA OUTiA,
NOP, NOP, ( let SPI relay breathe )
SPI_DATA INAi,
L A LDrr,
HL PUSH,
;CODE
CODE (spie) SPI_CSLOW OUTiA, ;CODE
CODE (spid) SPI_CSHIGH OUTiA, ;CODE

12
blk/600
View File

@ -1,13 +1,11 @@
SD Card driver
Load range: 602-616
Load range: 603-616
This driver is designed for a ad-hoc adapter card that acts as a
SPI relay between the z80 bus and the SD card. That adapter is
expected to pull CS low when something is written to SDC_CSLOW,
high on SDC_CSHIGH and to initiate a SPI exchange when a byte is
written to SDC_SPI, the result of that exchange being fetched
with a read to SDC_SPI.
SPI relay between the z80 bus and the SD card. It requires a SPI
driver providing (spix), (spie) and (spid), which oh surprise!
is included in Collapse OS at B595.
Through that layer, this driver implements the SDC protocol
Through that layer, this driver implements the SDC protocol
allowing it to provide BLK@ and BLK!.

12
blk/602
View File

@ -1,12 +0,0 @@
( Initiate SPI exchange with the SD card. n is the data to
send. )
CODE _sdcSR ( n -- n )
HL POP,
chkPS,
A L LDrr,
SDC_SPI OUTiA,
NOP, NOP,
SDC_SPI INAi,
L A LDrr,
HL PUSH,
;CODE

2
blk/603
View File

@ -1,5 +1,3 @@
CODE _sdcSel SDC_CSLOW OUTiA, ;CODE
CODE _sdcDesel SDC_CSHIGH OUTiA, ;CODE
( Computes n into crc c with polynomial 0x1021 )
CODE _crc16 ( c n -- c )
HL POP, ( n ) DE POP, ( c )

4
blk/604
View File

@ -1,8 +1,8 @@
( -- n )
: _idle 0xff _sdcSR ;
: _idle 0xff (spix) ;
( -- n )
( _sdcSR 0xff until the response is something else than 0xff
( spix 0xff until the response is something else than 0xff
for a maximum of 20 times. Returns 0xff if no response. )
: _wait
0 ( cnt )

2
blk/607
View File

@ -1,3 +1,3 @@
( send-and-crc7 )
( n c -- c )
: _s+crc SWAP DUP _sdcSR DROP _crc7 ;
: _s+crc SWAP DUP (spix) DROP _crc7 ;

2
blk/608
View File

@ -11,6 +11,6 @@
SWAP 256 /MOD ROT ( h l crc )
_s+crc _s+crc ( crc )
0x01 OR ( ensure stop bit )
_sdcSR DROP ( send CRC )
(spix) DROP ( send CRC )
_wait ( wait for a valid response... )
;

6
blk/609
View File

@ -1,15 +1,15 @@
( cmd arg1 arg2 -- r )
( Send a command that expects a R1 response, handling CS. )
: SDCMDR1 _sdcSel _cmd _sdcDesel ;
: SDCMDR1 (spie) _cmd (spid) ;
( cmd arg1 arg2 -- r arg1 arg2 )
( Send a command that expects a R7 response, handling CS. A R7
is a R1 followed by 4 bytes. arg1 contains bytes 0:1, arg2
has 2:3 )
: SDCMDR7
_sdcSel
(spie)
_cmd ( r )
_idle 8 LSHIFT _idle + ( r arg1 )
_idle 8 LSHIFT _idle + ( r arg1 arg2 )
_sdcDesel
(spid)
;

2
blk/610
View File

@ -1,4 +1,4 @@
: _err _sdcDesel ABORT" SDerr" ;
: _err (spid) ABORT" SDerr" ;
( Tight definition ahead, pre-comment.

4
blk/612
View File

@ -1,5 +1,5 @@
: _sdc@ ( dstaddr blkno -- )
_sdcSel 0x51 ( CMD17 ) 0 ROT ( a cmd 0 blkno ) _cmd
(spie) 0x51 ( CMD17 ) 0 ROT ( a cmd 0 blkno ) _cmd
IF _err THEN
_wait 0xfe = NOT IF _err THEN
0 SWAP ( crc a )
@ -11,5 +11,5 @@
LOOP
DROP ( crc1 )
_idle 8 LSHIFT _idle + ( crc2 )
_wait DROP _sdcDesel
_wait DROP (spid)
= NOT IF _err THEN ;

10
blk/614
View File

@ -1,16 +1,16 @@
: _sdc! ( srcaddr blkno -- )
_sdcSel 0x58 ( CMD24 ) 0 ROT ( a cmd 0 blkno ) _cmd
(spie) 0x58 ( CMD24 ) 0 ROT ( a cmd 0 blkno ) _cmd
IF _err THEN
_idle DROP 0xfe _sdcSR DROP
_idle DROP 0xfe (spix) DROP
0 SWAP ( crc a )
512 0 DO ( crc a )
C@+ ( crc a+1 n )
ROT OVER ( a n crc n )
_crc16 ( a n crc )
SWAP ( a crc n )
_sdcSR DROP ( a crc )
(spix) DROP ( a crc )
SWAP ( crc a )
LOOP
DROP ( crc ) 256 /MOD ( lsb msb )
_sdcSR DROP _sdcSR DROP
_wait DROP _sdcDesel ;
(spix) DROP (spix) DROP
_wait DROP (spid) ;

2
blk/618
View File

@ -1,8 +1,6 @@
0xff00 CONSTANT RS_ADDR 0xfffa CONSTANT PS_ADDR
RS_ADDR 0x80 - CONSTANT SYSVARS
0x8000 CONSTANT HERESTART
4 CONSTANT SDC_SPI
5 CONSTANT SDC_CSLOW 6 CONSTANT SDC_CSHIGH
582 LOAD ( acia decl )
212 LOAD ( z80 assembler )
262 LOAD ( xcomp ) 282 LOAD ( boot.z80.decl )

12
recipes/rc2014/sdcard/README.md
View File

@ -71,11 +71,17 @@ instead.
## Building your binary
The binary built in the base recipe doesn't have SDC drivers. Using the same
instructions as in the `eeprom` recipe, you'll need to insert those drivers.
instructions as in the `eeprom` recipe, you'll need to assemble a binary with
those drivers. First, we need drivers for the SPI relay. This is done by
declaring `SPI_DATA`, `SPI_CSLOW` and `SPI_CSHIGH`, which are respectively `4`,
`5` and `6` in our relay design. You can then load the driver with `596 LOAD`.
This driver provides `(spix)`, `(spie)` and `(spid)` which are then used in the
SDC driver.
The SDC driver is at B600. It gives you a load range. This means that what
you need to insert in `xcomp` will look like:
602 616 LOADR ( sdc )
603 616 LOADR ( sdc )
You also need to add `BLK$` to the init sequence.
@ -104,7 +110,7 @@ If there is no error message, we're fine. Then, we need to hook `BLK@*` and
And thats it! You have full access to disk block mechanism:
102 LOAD
105 LOAD
BROWSE
(at this moment, the driver is a bit slow though...)