Improve usage docs

blk/000

@@ -12,5 +12,5 @@ block, it means that the next block continues the same kind of
 contents. Block numbers are abbreviated with prefix "B". "BX"
 means "block X".
 
-The master index of this filesystem is at B1. The Block editor
+The master index of this filesystem is at B1. You can navi-
-at B100 is a convenient way to navigate blocks.
+gate and edit blocks with the Visual Editor at B120.

blk/003

@@ -12,5 +12,5 @@ Contents
 
  5 Number literals              6 Compilation vs meta-comp.
  8 Interpreter I/O             11 Signed-ness
-14 Addressed devices           17 DOES>
+17 DOES>                       18 Disk blocks
-18 Disk blocks                                          (cont.)
+                                                        (cont.)

blk/005

@@ -1,8 +1,8 @@
 Number literals
 
-Traditional Forth often use HEX/DEC switches to go from decimal
+Traditional Forth often uses HEX/DEC switches to go from deci-
-to hexadecimal parsing. Collapse OS parses literals in a way
+mal to hexadecimal parsing. Collapse OS parses literals in a
-that is closer to C.
+way that is closer to C.
 
 Straight numbers are decimals, numbers starting with "0x"
 are hexadecimals (example "0x12ef"), "0b" prefixes indicate

blk/006

@@ -1,8 +1,8 @@
 Compilation vs meta-compilation
 
 Compilation vs meta-compilation. When you compile a word with
-"[COMPILE] foo", its straightforward: It writes down to HERE
+"[COMPILE] foo", it's straightforward: It writes the address
-wither the address of the word or a number literal.
+of word foo to HERE.
 
 When you *meta* compile, it's a bit more mind blowing. It
 fetches the address of the word specified by the caller, then
@@ -12,5 +12,3 @@ writes that number as a literal, followed by a reference to
 Example: ": foo [COMPILE] bar;" is the equivalent of ": foo bar
 ;" if bar is not an immediate. However, ": foo COMPILE bar ;"
 is the equivalent of ": foo ['] bar , ;". Got it?
-
-Meta-compile only works with real words, not number literals.

blk/008

@@ -8,7 +8,7 @@ During normal operations, C< is simply a buffered layer over
 KEY, which has the same behavior (but unbuffered). Before
 yielding any character, the C< routine fetches a whole line
 from KEY, puts it in a buffer, then yields the buffered line,
-one character at once.
+one character at a time.
 
 Both C< and KEY can be overridden by setting an alternate
 routine at the proper RAM offset (see B80). For example, C<

blk/014

@@ -1,16 +0,0 @@
-Addressed devices
-
-The adev unit provides a simple but powerful abstraction over
-C@ and C!: A@ and A!. These work the same way as C@ and C! (but
-for performance reasons, aren't used in core words), but are
-indirect calls.
-
-Upon initialization, the default to C@ and C!, but can be set
-to any word through A@* and A!*.
-
-On top of that, it provides a few core-like words such as
-AMOVE.
-
-Let's demonstrate its use through a toy example:
-
-                                                        (cont.)

blk/015

@@ -1,16 +0,0 @@
-(cont.)
-    > : F! SWAP 1 + SWAP C! ;
-    > 8 H@ DUMP
-    :54 0000 0000 0000 0000 ........
-    > 9 H@ A!
-    > 8 H@ DUMP
-    :54 0900 0000 0000 0000 ........
-    > ' F! A!* !
-    > 9 H@ 1 + A!
-    > 8 H@ DUMP
-    :54 090a 0000 0000 0000 ........
-    > H@ H@ 2 + 2 AMOVE
-    > 8 H@ DUMP
-    :54 090a 0a0b 0000 0000 ........
-    > 
-                                                        (cont.)

blk/016

@@ -1,16 +0,0 @@
-(cont.) Of course, you might want to end up using adev in this
-kind of ad-hoc way to have some kind of mapping function, but
-what you'll mostly want to to is to plug device drivers into
-those words.
-
-
-
-
-
-
-
-
-
-
-
-

blk/017

@@ -2,7 +2,7 @@ DOES>
 
 Used inside a colon definition that itself uses CREATE, DOES>
 transforms that newly created word into a "does cell", that is,
-a regular cell ( when called, puts the cell's addr on PS), but
+a regular cell (when called, puts the cell's addr on PS), but
 right after that, it executes words that appear after the
 DOES>.
 

blk/120

@@ -2,15 +2,15 @@ Visual Editor
 
 This editor, unlike the Block Editor (B100), is grid-based
 instead of being command-based. It requires the AT-XY, COLS
-and LINES words to be implemented.
+and LINES words to be implemented. If you don't have those,
+use the Block Editor.
 
 It is loaded with "125 LOAD" and invoked with "VE". Note that
-this also fully loads the Block Editor (B100).
+this also fully loads the Block Editor.
 
-This editor uses 17 lines. The top line is the status line and
+This editor uses 19 lines. The top line is the status line and
-the 16 others are contents lines. The content shown is that
+it's followed by 2 lines showing the contents of IBUF and
-of the currently selected block.
+FBUF (see B100). There are then 16 contents lines. The contents
+shown is that of the currently selected block.
 
-All keystrokes are directly interpreted by VE and have the
-effect described below.
                                                         (cont.)

blk/121

@@ -1,3 +1,6 @@
+All keystrokes are directly interpreted by VE and have the
+effect described below.
+
 Pressing a 0-9 digit accumulates that digit into what is named
 the "modifier". That modifier affects the behavior of many
 keystokes described below. The modifier starts at zero, but
@@ -5,12 +8,9 @@ most commands interpret a zero as a 1 so that they can have an
 effect.
 
 'g' selects the block specified by the modifier as the current
-block. Any change madde to the previously selected block is
+block. Any change made to the previously selected block is
 saved beforehand.
 
-'[' and ']' advance the selected block by modifier.
+'[' and ']' advances the selected block by "modifier".
 
-';' resets the modifier. 'q' quits.
+';' resets the modifier. 'q' quits.                     (cont.)
-
-'h' and 'l' move the cursor by "modifier" characters. 'j' and
-'k', by lines.                                          (cont.)

blk/122

@@ -1,16 +1,16 @@
+'h' and 'l' move the cursor by "modifier" characters. 'j' and
+'k', by lines.
+
 'H' goes to the beginning of the line, 'L' to the end.
 
-'w' moves forward by a word. 'b' moves backward by a word.
+'w' moves forward by "modifier" words. 'b' moves backward.
-'W' moves to end-of-word. 'B' moves backward to end-of-word.
+'W' moves to end-of-word. 'B', backwards.
 
-'I', 'F' and 'E' invoke the corresponding command from the
+'I', 'F', 'X' and 'E' invoke the corresponding command from the
 Block Editor (B100). Refer to documentation there.
 
 'o' inserts a blank line after the cursor. 'O', before.
 
 'D' deletes "modifier" lines at the cursor.
 
-
-
-
                                                         (cont.)

blk/123

@@ -1,11 +1,9 @@
-'f' puts the contents of your previous cursor movement into the
+'f' puts the contents of your previous cursor movement into
-find buffer. If that movement was a forward movement, it brings
+FBUF. If that movement was a forward movement, it brings the
-the cursor back where it was. This allows for an efficient
+cursor back where it was. This allows for an efficient combi-
-combination of movements and 'E'. For example, if you want to
+nation of movements and 'E'. For example, if you want to delete
-delete the next word, you type 'w', then 'f', then check your
+the next word, you type 'w', then 'f', then check your FBUF to
-"F" buffer to be sure, then press 'E'.
+be sure, then press 'E'.
-
-'X' deletes "modifier" characters following cursor.
 
 'R' goes into replace mode at current cursor position.
 Following keystrokes replace current character and advance