izaya/collapseos
1
0
Fork 0
mirror of https://github.com/hsoft/collapseos.git synced 2024-11-23 13:48:05 +11:00
Code Issues Releases Wiki Activity

trs80: implement a standalone RS-232 driver

Browse Source 
No more relying on the TRS-DOS driver!
This commit is contained in:
Virgil Dupras 2020-12-25 16:54:02 -05:00
parent 18f6978399
commit 5ca99ad410
2 changed files with 17 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/z80/trs80/blk.fs
View File

@ -100,9 +100,10 @@ EXX, ( unprotect BC ) ;CODE
: FD! ['] @WRSEC SWAP FD@! ;
: FD$ ['] FD@ BLK@* ! ['] FD! BLK!* ! ;
: _err LIT" *CLerr" ERR ;
: *CL< 0 BEGIN DROP 0x0238 @GET UNTIL ;
: *CL> 0x0238 @PUT NOT IF _err THEN ;
: CL$ 0x02 0xe8 PC! ( UART RST ) 0xee 0xe9 PC! ( 9600 bauds )
0b01101100 0xea PC! ( word8 no parity RTS ) ;
: CL> BEGIN 0xea PC@ 0x40 AND UNTIL 0xeb PC! ;
: CL< BEGIN 0xea PC@ 0x80 AND UNTIL 0xeb PC@ ;
( ----- 612 )
( We process the 0x20 exception by pre-putting a mask in the
(HL) we're going to write to. If it wasn't a 0x20, we put a

23
doc/hw/z80/trs80.txt
View File

@ -257,8 +257,8 @@ And there we go! A Collapse OS launchable from floppy!
# Sending blkfs to floppy
As it is, your system fully supports reading and writing to
floppy drive 1. It also had *CL< to read a char from *cl and
*CL> to emit a char to *cl.
floppy drive 1. It also had CL< to read a char from its RS-232
port and CL> to emit to it.
That's all you need to have a full Collapse OS with access to
disk blocks.
@ -267,16 +267,19 @@ First, make sure your floppies are formatted. Collapse OS is
currently hardcoded to single side and single density, which
means there's a limit of 100 blocks per disk.
You'll need to send those blocks through RS-232. Begin by taking
over the prompt:
You'll need to send those blocks through RS-232. First, let's
initialize the driver with CL$. This driver does not require
the TRS-DOS driver to be loaded. Also, it is hardcoded to
"no parity, 8 bit words, 9600 bauds". Now, let's have the CL
take over the prompt:
' *CL> ' EMIT **!
' *CL< ' KEY **!
' CL> ' EMIT **!
' CL< ' KEY **!
See B80 for details about those RAM offsets. Your serial link
now has the prompt. You will also have to make your newlines
CRLF. The TRS-80 wants CR only, but serial communications (and
blkup) expect CRLF:
See "Aliases" in usage.txt for details. Your serial link now has
the prompt. You will also have to make your newlines CRLF. The
TRS-80 wants CR only, but serial communications (and blkup)
expect CRLF:
' CRLF ' NL **!