pcat: add PICK and (roll)

blk/750

@@ -1 +1 @@
-1 9 LOADR+
+1 11 LOADR+

blk/751

@@ -8,3 +8,4 @@ VARIABLE L1 VARIABLE L2 VARIABLE L3 VARIABLE L4
 : ES 0 ; : CS 1 ; : SS 2 ; : DS 3 ;
 : [BX+SI] 0 ; : [BX+DI] 1 ; : [BP+SI] 2 ; : [BP+DI] 3 ;
 : [SI] 4 ; : [DI] 5 ; : [BP] 6 ; : [BX] 7 ;
+: <<3 3 LSHIFT ;

blk/753

@@ -2,12 +2,13 @@
 0xc3 OP1 RETn,       0xfa OP1 CLI,       0xfb OP1 STI,
 0xf4 OP1 HLT,        0xfc OP1 CLD,       0xfd OP1 STD,
 0x90 OP1 NOP,
+0xf3 OP1 REPZ,       0xf2 OP1 REPNZ,     0xac OP1 LODSB,
+0xad OP1 LODSW,      0xa6 OP1 CMPSB,     0xa7 OP1 CMPSW,
+0xa4 OP1 MOVSB,      0xa5 OP1 MOVSW,     0xae OP1 SCASB,
+0xaf OP1 SCASW,      0xaa OP1 STOSB,     0xab OP1 STOSW,
 ( no argument, jumps with relative addrs are special )
 0xeb OP1 JMPs,       0xe9 OP1 JMPn,      0x74 OP1 JZ,
 0x75 OP1 JNZ,        0xe8 OP1 CALLn,
-0xf3 OP1 REPZ,       0xf2 OP1 REPNZ,     0xac OP1 LODSB,
-0xa6 OP1 CMPSB,      0xa4 OP1 MOVSB,     0xae OP1 SCASB,
-0xaa OP1 STOSB,
 
 : OP1r CREATE C, DOES> C@ + A, ;
 0x40 OP1r INCx,      0x48 OP1r DECx,

blk/754

@@ -1,16 +1,14 @@
-: OPrr CREATE C, DOES> C@ A, 3 LSHIFT OR 0xc0 OR A, ;
+: OPr0 ( reg op ) CREATE C, C, DOES>
+    C@+ A, C@ <<3 OR 0xc0 OR A, ;
+0 0xd0 OPr0 ROLr1,   0 0xd1 OPr0 ROLx1,
+1 0xd0 OPr0 RORr1,   1 0xd1 OPr0 RORx1,
+4 0xd0 OPr0 SHLr1,   4 0xd1 OPr0 SHLx1,
+5 0xd0 OPr0 SHRr1,   5 0xd1 OPr0 SHRx1,
+
+: OPrr CREATE C, DOES> C@ A, <<3 OR 0xc0 OR A, ;
 0x31 OPrr XORxx,     0x30 OPrr XORrr,
 0x88 OPrr MOVrr,     0x89 OPrr MOVxx,    0x28 OPrr SUBrr,
 0x29 OPrr SUBxx,     0x08 OPrr ORrr,     0x09 OPrr ORxx,
 0x3a OPrr CMPrr,     0x3b OPrr CMPxx,    0x00 OPrr ADDrr,
 0x01 OPrr ADDxx,
 
-: OPm ( modrm op ) CREATE C, C, DOES> C@+ A, C@ OR A, ;
-0 0xff OPm INC[w], 0 0xfe OPm INC[b],
-0x8 0xff OPm DEC[w], 0x8 0xfe OPm DEC[b],
-0x30 0xff OPm PUSH[w], 0 0x8f OPm POP[w],
-: OPm+ ( modrm op ) CREATE C, C, DOES>
-    ( m off ) C@+ A, C@ ROT OR A, A, ;
-0x40 0xff OPm+ INC[w]+, 0x40 0xfe OPm+ INC[b]+,
-0x48 0xff OPm+ DEC[w]+, 0x48 0xfe OPm+ DEC[b]+,
-0x70 0xff OPm+ PUSH[w]+, 0x40 0x8f OPm+ POP[w]+,

blk/755

@@ -1,14 +1,10 @@
-: OPrm CREATE C, DOES> C@ A, SWAP 3 LSHIFT OR A, ;
-0x8a OPrm MOVr[],    0x8b OPrm MOVx[],
+: OPm ( modrm op ) CREATE C, C, DOES> C@+ A, C@ OR A, ;
+0 0xff OPm INC[w], 0 0xfe OPm INC[b],
+0x8 0xff OPm DEC[w], 0x8 0xfe OPm DEC[b],
+0x30 0xff OPm PUSH[w], 0 0x8f OPm POP[w],
 
-: OPmr CREATE C, DOES> C@ A, 3 LSHIFT OR A, ;
-0x88 OPmr MOV[]r,    0x89 OPmr MOV[]x,
-
-: OPrm+ ( r m off ) CREATE C, DOES>
-    C@ A, ROT 3 LSHIFT ROT OR 0x40 OR A, A, ;
-0x8a OPrm+ MOVr[]+,    0x8b OPrm+ MOVx[]+,
-0x3a OPrm+ CMPr[]+,    0x3b OPrm+ CMPx[]+,
-
-: OPm+r ( m off r ) CREATE C, DOES>
-    C@ A, 3 LSHIFT ROT OR 0x40 OR A, A, ;
-0x88 OPm+r MOV[]+r,    0x89 OPm+r MOV[]+x,
+: OPm+ ( modrm op ) CREATE C, C, DOES>
+    ( m off ) C@+ A, C@ ROT OR A, A, ;
+0x40 0xff OPm+ INC[w]+, 0x40 0xfe OPm+ INC[b]+,
+0x48 0xff OPm+ DEC[w]+, 0x48 0xfe OPm+ DEC[b]+,
+0x70 0xff OPm+ PUSH[w]+, 0x40 0x8f OPm+ POP[w]+,

blk/756

@@ -1,10 +0,0 @@
-: MOVri, SWAP 0xb0 OR A, A, ;
-: MOVxI, SWAP 0xb8 OR A, A,, ;
-: MOVsx, 0x8e A, SWAP 3 LSHIFT OR 0xc0 OR A, ;
-: MOVxm, 0x8b A, SWAP 3 LSHIFT 0x6 OR A, A,, ;
-: INT, 0xcd A, A, ;
-: ADDAXI, 0x05 A, A,, ; : ADDALi, 0x04 A, A, ;
-: SUBxi, 0x83 A, SWAP 0xe8 OR A, A, ;
-: ADDxi, 0x83 A, SWAP 0xc0 OR A, A, ;
-: JMPr, 0xff A, 7 AND 0xe0 OR A, ;
-: JMPf, ( seg off ) 0xea A, SPLITB A, A, A,, ;

blk/757

@@ -1,16 +1,14 @@
-( Place BEGIN, where you want to jump back and AGAIN after
-  a relative jump operator. Just like BSET and BWR. )
-: BEGIN, PC ;
-: BSET PC SWAP ! ;
-( same as BSET, but we need to write a placeholder )
-: FJR, PC 0 A, ;
-: IFZ, JNZ, FJR, ;
-: IFNZ, JZ, FJR, ;
-( : IFC, JRNC, FJR, ;
-: IFNC, JRC, FJR, ; )
-: THEN,
-    DUP PC          ( l l pc )
-    -^ 1-           ( l off )
-    ( warning: l is a PC offset, not a mem addr! )
-    SWAP ORG @ + BIN( @ - ( off addr )
-    C! ;
+: OPrm CREATE C, DOES> C@ A, SWAP 3 LSHIFT OR A, ;
+0x8a OPrm MOVr[],    0x8b OPrm MOVx[],
+
+: OPmr CREATE C, DOES> C@ A, 3 LSHIFT OR A, ;
+0x88 OPmr MOV[]r,    0x89 OPmr MOV[]x,
+
+: OPrm+ ( r m off ) CREATE C, DOES>
+    C@ A, ROT 3 LSHIFT ROT OR 0x40 OR A, A, ;
+0x8a OPrm+ MOVr[]+,    0x8b OPrm+ MOVx[]+,
+0x3a OPrm+ CMPr[]+,    0x3b OPrm+ CMPx[]+,
+
+: OPm+r ( m off r ) CREATE C, DOES>
+    C@ A, 3 LSHIFT ROT OR 0x40 OR A, A, ;
+0x88 OPm+r MOV[]+r,    0x89 OPm+r MOV[]+x,

blk/758

@@ -1,10 +1,10 @@
-: FWRs BSET 0 A, ;
-: FSET @ THEN, ;
-( : BREAK, FJR, 0x8000 OR ;
-: BREAK?, DUP 0x8000 AND IF
-        0x7fff AND 1 ALLOT THEN, -1 ALLOT
-    THEN ; )
-: RPCs, PC - 1- A, ; : RPCn, PC - 2- A,, ;
-: AGAIN, ( BREAK?, ) RPCs, ;
-( Use RPCx with appropriate JMP/CALL op. Example:
-  JMPs, 0x42 RPCs, or CALLn, 0x1234 RPCn, )
+: MOVri, SWAP 0xb0 OR A, A, ;
+: MOVxI, SWAP 0xb8 OR A, A,, ;
+: MOVsx, 0x8e A, SWAP 3 LSHIFT OR 0xc0 OR A, ;
+: MOVxm, 0x8b A, SWAP 3 LSHIFT 0x6 OR A, A,, ;
+: INT, 0xcd A, A, ;
+: ADDAXI, 0x05 A, A,, ; : ADDALi, 0x04 A, A, ;
+: SUBxi, 0x83 A, SWAP 0xe8 OR A, A, ;
+: ADDxi, 0x83 A, SWAP 0xc0 OR A, A, ;
+: JMPr, 0xff A, 7 AND 0xe0 OR A, ;
+: JMPf, ( seg off ) 0xea A, SPLITB A, A, A,, ;

blk/759

@@ -1,3 +1,16 @@
-: CODE ( same as CREATE, but with native word )
-    (entry) 0 ( native ) C, ;
-: ;CODE JMPn, 0x1a ( next ) RPCn, ;
+( Place BEGIN, where you want to jump back and AGAIN after
+  a relative jump operator. Just like BSET and BWR. )
+: BEGIN, PC ;
+: BSET PC SWAP ! ;
+( same as BSET, but we need to write a placeholder )
+: FJR, PC 0 A, ;
+: IFZ, JNZ, FJR, ;
+: IFNZ, JZ, FJR, ;
+( : IFC, JRNC, FJR, ;
+: IFNC, JRC, FJR, ; )
+: THEN,
+    DUP PC          ( l l pc )
+    -^ 1-           ( l off )
+    ( warning: l is a PC offset, not a mem addr! )
+    SWAP ORG @ + BIN( @ - ( off addr )
+    C! ;

blk/760

@@ -0,0 +1,10 @@
+: FWRs BSET 0 A, ;
+: FSET @ THEN, ;
+( : BREAK, FJR, 0x8000 OR ;
+: BREAK?, DUP 0x8000 AND IF
+        0x7fff AND 1 ALLOT THEN, -1 ALLOT
+    THEN ; )
+: RPCs, PC - 1- A, ; : RPCn, PC - 2- A,, ;
+: AGAIN, ( BREAK?, ) RPCs, ;
+( Use RPCx with appropriate JMP/CALL op. Example:
+  JMPs, 0x42 RPCs, or CALLn, 0x1234 RPCn, )

blk/761

@@ -0,0 +1,3 @@
+: CODE ( same as CREATE, but with native word )
+    (entry) 0 ( native ) C, ;
+: ;CODE JMPn, 0x1a ( next ) RPCn, ;

blk/821

@@ -5,8 +5,12 @@ CODE SWAP AX POPx, BX POPx, AX PUSHx, BX PUSHx, ;CODE
 CODE OVER ( a b -- a b a )
     DI SP MOVxx, AX [DI] 2 MOVx[]+, AX PUSHx,
 ;CODE
-CODE 0 AX AX XORxx, AX PUSHx, ;CODE
-CODE 1 AX 1 MOVxI, AX PUSHx, ;CODE
-CODE I [BP] 0 PUSH[w]+, ;CODE
-CODE 1+ DI SP MOVxx, [DI] INC[w], ;CODE
-CODE 1- DI SP MOVxx, [DI] DEC[w], ;CODE
+CODE PICK
+    DI POPx, DI SHLx1, ( x2 )
+    DI SP ADDxx, DI [DI] MOVx[], DI PUSHx,
+;CODE
+CODE (roll) ( "2 3 4 5 4 --> 2 4 5 5". See B311 )
+    CX POPx, SI SP MOVxx, SI CX ADDxx,
+    DI SI MOVxx, SI DECx, SI DECx,
+    STD, REPZ, MOVSB,
+;CODE

blk/822

@@ -1,6 +1,5 @@
-CODE BYE BEGIN, JMPs, AGAIN, ;CODE
-CODE EMIT
-    AX POPx, AH 0x0e MOVri, ( print char ) 0x10 INT,
-;CODE
-: FOO 'A' 'B' 'C' OVER EMIT EMIT EMIT ;
-: BOOT ['] FOO EXECUTE BYE ;
+CODE 0 AX AX XORxx, AX PUSHx, ;CODE
+CODE 1 AX 1 MOVxI, AX PUSHx, ;CODE
+CODE I [BP] 0 PUSH[w]+, ;CODE
+CODE 1+ DI SP MOVxx, [DI] INC[w], ;CODE
+CODE 1- DI SP MOVxx, [DI] DEC[w], ;CODE

blk/824

@@ -0,0 +1,6 @@
+CODE BYE BEGIN, JMPs, AGAIN, ;CODE
+CODE EMIT
+    AX POPx, AH 0x0e MOVri, ( print char ) 0x10 INT,
+;CODE
+: FOO 'A' 'B' 'C' 2 PICK 4 (roll) EMIT EMIT EMIT EMIT ;
+: BOOT ['] FOO EXECUTE BYE ;

recipes/pcat/xcomp.fs

@@ -3,7 +3,7 @@
 750 LOAD  ( 8086 asm )
 262 LOAD  ( xcomp )
 270 LOAD  ( xcomp overrides )
-812 822 LOADR
+812 824 LOADR
 (entry) _
 ( Update LATEST )
 PC ORG @ 8 + !