recipes/trs80: add CFS support

recipes/trs80/README.md

@@ -214,6 +214,11 @@ In addition to this, there is a `flush` command to ensure that dirty buffers are
 synced to disk. Make sure you run this after a write operation or before
 swapping disks.
 
+On top of that, there's CFS support builtin. To enable a FS, type `fson` while
+the active block device is properly placed (you can initialize a new FS by
+writing `CFS\0\0\0\0` to the disk). If it doesn't error out, commands like
+`fls` and `fnew` will work. Don't forget to flush when you're finished :)
+
 There is also a custom `recv` command that does the same "ping pong" as in
 `recv.asm`, but once. It puts the result in `A`. This can be useful to send down
 a raw CFS: you just need a while loop that repeatedly call `recv:putb a`.

recipes/trs80/glue.asm

@@ -2,6 +2,8 @@
 .equ	RAMEND		0xcfff
 ; Address of the *CL driver. Same as in recv.asm
 .equ	COM_DRV_ADDR	0x0238
+; in sync with user.h. Last BAS_RAMEND: 0x5705
+.equ	USER_CODE	0x5800
 
 ; Free memory in TRSDOS starts at 0x3000
 .org	0x3000
@@ -9,6 +11,7 @@
 
 .inc "err.h"
 .inc "blkdev.h"
+.inc "fs.h"
 .inc "ascii.h"
 .inc "core.asm"
 .inc "str.asm"
@@ -19,16 +22,22 @@
 .inc "trs80/floppy.asm"
 
 .equ	BLOCKDEV_RAMSTART	FLOPPY_RAMEND
-.equ	BLOCKDEV_COUNT		1
+.equ	BLOCKDEV_COUNT		3
 .inc "blockdev.asm"
 ; List of devices
 .dw	floppyGetB, floppyPutB
+.dw	blk1GetB, blk1PutB
+.dw	blk2GetB, blk2PutB
 
 .equ	STDIO_RAMSTART	BLOCKDEV_RAMEND
 .equ	STDIO_GETC	trs80GetC
 .equ	STDIO_PUTC	trs80PutC
 .inc "stdio.asm"
 
+.equ	FS_RAMSTART	STDIO_RAMEND
+.equ	FS_HANDLE_COUNT	2
+.inc "fs.asm"
+
 ; The TRS-80 generates a double line feed if we give it both CR and LF.
 .equ	printcrlf	printcr
 
@@ -36,7 +45,7 @@
 
 ; RAM space used in different routines for short term processing.
 .equ	SCRATCHPAD_SIZE	STDIO_BUFSIZE
-.equ	SCRATCHPAD	STDIO_RAMEND
+.equ	SCRATCHPAD	FS_RAMEND
 .inc "lib/util.asm"
 .inc "lib/ari.asm"
 .inc "lib/parse.asm"
@@ -50,14 +59,19 @@
 .inc "basic/var.asm"
 .equ	BUF_RAMSTART	VAR_RAMEND
 .inc "basic/buf.asm"
+.equ	BFS_RAMSTART	BUF_RAMEND
+.inc "basic/fs.asm"
 .inc "basic/blk.asm"
 .inc "basic/floppy.asm"
-.equ	BAS_RAMSTART	BUF_RAMEND
+.equ	BAS_RAMSTART	BFS_RAMEND
 .inc "basic/main.asm"
 
+.out	BAS_RAMEND
+
 init:
 	ld	sp, RAMEND
 	call	floppyInit
+	call	fsInit
 	call	basInit
 	ld	hl, basFindCmdExtra
 	ld	(BAS_FINDHOOK), hl
@@ -124,6 +138,9 @@ basFindCmdExtra:
 	ld	hl, basBLKCmds
 	call	basFindCmd
 	ret	z
+	ld	hl, basFSCmds
+	call	basFindCmd
+	ret	z
 	ld	hl, .cmds
 	jp	basFindCmd
 
@@ -132,4 +149,24 @@ basFindCmdExtra:
 	.dw	recvCmd
 	.db	0xff		; end of table
 
+; *** blkdev 1: file handle 0 ***
+
+blk1GetB:
+	ld	ix, FS_HANDLES
+	jp	fsGetB
+
+blk1PutB:
+	ld	ix, FS_HANDLES
+	jp	fsPutB
+
+; *** blkdev 2: file handle 1 ***
+
+blk2GetB:
+	ld	ix, FS_HANDLES+FS_HANDLE_SIZE
+	jp	fsGetB
+
+blk2PutB:
+	ld	ix, FS_HANDLES+FS_HANDLE_SIZE
+	jp	fsPutB
+
 RAMSTART: