collapseos/arch/8086/pcat/Makefile

# See /doc/hw/8086/pcat.txt
TARGET = disk.bin
BASE = ../../..
CDIR = $(BASE)/cvm
BLKPACK = $(BASE)/tools/blkpack
STAGE = $(CDIR)/stage
EMUL = $(BASE)/emul/8086/pcat

.PHONY: all
all: $(TARGET) 
os.bin: xcomp.fs $(STAGE) blkfs
	$(STAGE) blkfs < xcomp.fs > $@

$(BLKPACK):
	$(MAKE) -C $(BASE)/tools

blkfs: $(BLKPACK)
	cat $(BASE)/blk.fs blk.fs | $(BLKPACK) > $@

$(STAGE):
	$(MAKE) -C $(CDIR) stage

mbr.bin: mbr.fs $(STAGE) blkfs
	cat mbr.fs | $(STAGE) blkfs > $@

$(TARGET): mbr.bin os.bin
	cat mbr.bin os.bin > $@
	dd if=blkfs of=$@ bs=512 seek=16

$(EMUL):
	$(MAKE) -C $(BASE)/emul/8086

.PHONY: emul
emul: $(TARGET) $(EMUL)
	$(EMUL) $(TARGET)

.PHONY: clean
clean:
	rm *.bin
Complete overhaul of recipes Recipes contain bits and pieces of hardware-related knowledge, but these bits feel sparse. I've been wanting to consolidate hardware- related documentation for a while, but always fell at odds with the recipes organisation. We don't have recipes anymore, just a /doc/hw section that contains hardware-related documentation which often translate to precise instructions to run Collapse OS on a specific machine. With this new organisation, I hope to end up with a better, more solid documentation. 2020-10-31 11:31:47 +11:00			`# See /doc/hw/8086/pcat.txt`
pcat: separate MBR code and OS code MBR code now strictly loads OS code into memory and jumps into it. Now, I've got to consolidate my assembler code, modrm logic is messed up. 2020-06-14 05:35:16 +10:00			`TARGET = disk.bin`
Complete overhaul of recipes Recipes contain bits and pieces of hardware-related knowledge, but these bits feel sparse. I've been wanting to consolidate hardware- related documentation for a while, but always fell at odds with the recipes organisation. We don't have recipes anymore, just a /doc/hw section that contains hardware-related documentation which often translate to precise instructions to run Collapse OS on a specific machine. With this new organisation, I hope to end up with a better, more solid documentation. 2020-10-31 11:31:47 +11:00			`BASE = ../../..`
recipes/pcat: move recipe blocks into local overlay 2020-09-21 10:48:52 +10:00			`CDIR = $(BASE)/cvm`
			`BLKPACK = $(BASE)/tools/blkpack`
recipes: use cvm's staging binary instead of emul's Much faster! 2020-06-27 11:23:13 +10:00			`STAGE = $(CDIR)/stage`
emul/8086: add PC/AT emulator 2020-10-26 01:27:52 +11:00			`EMUL = $(BASE)/emul/8086/pcat`
recipes/pcat: first steps into 8086! 2020-06-13 04:01:24 +10:00
			`.PHONY: all`
			`all: $(TARGET)`
recipes/pcat: move recipe blocks into local overlay 2020-09-21 10:48:52 +10:00			`os.bin: xcomp.fs $(STAGE) blkfs`
			`$(STAGE) blkfs < xcomp.fs > $@`
pcat: separate MBR code and OS code MBR code now strictly loads OS code into memory and jumps into it. Now, I've got to consolidate my assembler code, modrm logic is messed up. 2020-06-14 05:35:16 +10:00
recipes/pcat: move recipe blocks into local overlay 2020-09-21 10:48:52 +10:00			`$(BLKPACK):`
emul/8086: add PC/AT emulator 2020-10-26 01:27:52 +11:00			`$(MAKE) -C $(BASE)/tools`
recipes/pcat: first steps into 8086! 2020-06-13 04:01:24 +10:00
recipes/pcat: move recipe blocks into local overlay 2020-09-21 10:48:52 +10:00			`blkfs: $(BLKPACK)`
Transform "blk/" folders into "blk.fs" text files Working in "blk/" folder from a modern system is harder than it should be. Moving blocks around is a bit awkward, grepping is a bit less convenient than it could be, git blame has troubles following, etc. In this commit, we modify blkpack and blkunpack to work with single text files with blocks being separated by a special markup. I think this will make the code significantly more convenient to work into. 2020-11-15 10:00:31 +11:00			`cat $(BASE)/blk.fs blk.fs \| $(BLKPACK) > $@`
pcat: separate MBR code and OS code MBR code now strictly loads OS code into memory and jumps into it. Now, I've got to consolidate my assembler code, modrm logic is messed up. 2020-06-14 05:35:16 +10:00
recipes/pcat: first steps into 8086! 2020-06-13 04:01:24 +10:00			`$(STAGE):`
recipes: use cvm's staging binary instead of emul's Much faster! 2020-06-27 11:23:13 +10:00			`$(MAKE) -C $(CDIR) stage`
recipes/pcat: first steps into 8086! 2020-06-13 04:01:24 +10:00
Move 8086 assembler from B730 to B30 Also, move doc to doc/asm.txt. Also, fix the pcat recipe which was broken since the overlay change. I hadn't noticed it because I didn't have to rebuild the MBR. 2020-09-22 09:23:33 +10:00			`mbr.bin: mbr.fs $(STAGE) blkfs`
			`cat mbr.fs \| $(STAGE) blkfs > $@`
recipes/pcat: move recipe blocks into local overlay 2020-09-21 10:48:52 +10:00
			`$(TARGET): mbr.bin os.bin`
			`cat mbr.bin os.bin > $@`
			`dd if=blkfs of=$@ bs=512 seek=16`

emul/8086: add PC/AT emulator 2020-10-26 01:27:52 +11:00			`$(EMUL):`
			`$(MAKE) -C $(BASE)/emul/8086`

recipes/pcat: first steps into 8086! 2020-06-13 04:01:24 +10:00			`.PHONY: emul`
emul/8086: add PC/AT emulator 2020-10-26 01:27:52 +11:00			`emul: $(TARGET) $(EMUL)`
			`$(EMUL) $(TARGET)`
pcat: separate MBR code and OS code MBR code now strictly loads OS code into memory and jumps into it. Now, I've got to consolidate my assembler code, modrm logic is messed up. 2020-06-14 05:35:16 +10:00
			`.PHONY: clean`
			`clean:`
			`rm *.bin`