Set up a proper test of a simple Copper network.

The reliability layer isn't in use here, as it will be tested separately.
I need to adjust the base Copper protocol first.

culib.lua

@@ -30,11 +30,11 @@ return function (hostname, transmit, onReceive, time)
 
 	-- Expect a response by this many seconds,
 	-- or else clear the known receivers cache and resend.
-	local tuningExpectResponse = 20
+	local tuningExpectResponse = 10
 
 	-- Flush the loop detector every so often.
 	-- This is not a complete clear.
-	local tuningFlushLoopDetector = 120
+	local tuningFlushLoopDetector = 10
 
 	-- Do not change this value. I mean it. Don't. Just. Don't.
 	local tuningAutorejectLen = 4000
@@ -49,17 +49,12 @@ return function (hostname, transmit, onReceive, time)
 	local seenBefore = {}
 	local seenBeforeCount = 0
 
-	-- Unacknowledged packets.
-	-- Can cause an earlier cache flush.
-	-- [address] = giveupTime
-	-- (These are just forgotten after a while)
-	--local sentBNR = {}--NYI
-
 	-- [address] = {
 	--      node,
-	--      expiry
+	--      expiry,
+	--      broadcastOnExpire
 	-- }
-	--local lastKnownReceiver = {}--NYI
+	local lastKnownReceiver = {}
 
 	local function refresh()
 		local t = time()
@@ -75,6 +70,14 @@ return function (hostname, transmit, onReceive, time)
 			end
 			loopDetectorNext = time() + tuningFlushLoopDetector
 		end
+		for k, v in pairs(lastKnownReceiver) do
+			if t >= v[2] then
+				lastKnownReceiver[k] = nil
+				for _, m in ipairs(v[3]) do
+					transmit(nil, m)
+				end
+			end
+		end
 	end
 
 	local culib = {}
@@ -82,6 +85,7 @@ return function (hostname, transmit, onReceive, time)
 	-- Can be changed.
 	culib.hostname = hostname
 	culib.input = function (node, message)
+		local t = time()
 		if message:len() > tuningAutorejectLen then
 			return
 		end
@@ -97,24 +101,44 @@ return function (hostname, transmit, onReceive, time)
 				seenBefore = {}
 			end
 		end
+		-- Begin parsing
+		local rawmessage = message
+
 		if message:len() < 2 then return end
 		local nlen = message:byte(1) + 1
-		local fnam = message:sub(1, nlen)
-		message = message:sub(nlen + 1)
+		local fnam = message:sub(2, nlen + 1)
+		message = message:sub(nlen + 2)
+
 		if message:len() < 2 then return end
 		local nlen = message:byte(1) + 1
-		local tnam = message:sub(1, nlen)
-		message = message:sub(nlen + 1)
-		if message:len() < 1 then return end
+		local tnam = message:sub(2, nlen + 1)
+		message = message:sub(nlen + 2)
+
+		lastKnownReceiver[fnam] = {node, t + tuningExpectResponse, {}}
+		
 		onReceive(fnam, tnam, message)
 		if culib.hostname == tnam then return end
+
 		-- Redistribution of messages not aimed here
-		transmit(nil, message)
+		local lkr = lastKnownReceiver[tnam]
+		if lkr then
+			transmit(lkr[1], rawmessage)
+			table.insert(lkr[3], rawmessage)
+		else
+			transmit(nil, rawmessage)
 		end
+	end
+	local function encodeName(name)
+		if name:len() > 256 then error("Bad name (l>256)") end
+		if name == "" then error("No name") end
+		return string.char(name:len() - 1) .. name
+	end
+	culib.refresh = refresh
 	culib.output = function (fnam, tnam, message)
 		onReceive(fnam, tnam, message)
 		if tnam == culib.hostname then return end
-		transmit(nil, encodeName(fnam) .. encodeName(tnam) .. message)
+		local m = encodeName(fnam) .. encodeName(tnam) .. message
+		transmit(nil, m)
 	end
 	return culib
 end

runtest.lua

@@ -1,13 +1,88 @@
 -- Load testnet
+local culib = require("culib")
+
 local nodes = {}
+local nodeconnect = {}
 local nodenames = {}
-loadfile("testnet.lua")(function (n)
-	table.insert(nodes, {})
+
+local systime = 0
+local function getsystime()
+	return systime / 20
+end
+
+local queuedCalls = {}
+local function queueSend(n, v, data)
+	--print("transmit", n, v, data)
+	table.insert(queuedCalls, function ()
+		nodes[v].input(n, data)
+	end)
+end
+
+local statSD = 0
+local statPT = 0
+
+loadfile("testnet.lua")()(function (n)
+	local conn = {}
+	local nodeidx = (#nodes) + 1
+	table.insert(nodes, culib(n, function (node, data)
+		if node then
+			for _, v in ipairs(conn) do
+				if v == node then
+					queueSend(nodeidx, v, data)
+					return
+				end
+			end
+			error(nodeidx .. " -> " .. node .. " not directly possible")
+		else
+			for _, v in ipairs(conn) do
+				queueSend(nodeidx, v, data)
+			end
+		end
+	end, function (nfrom, nto, data)
+		if nto == n then
+			if data:sub(1, 1) == "T" then
+				nodes[nodeidx].output(n, nfrom, "R" .. data)
+			else
+				statSD = statSD + 1
+			end
+		else
+			statPT = statPT + 1
+		end
+	end, getsystime))
+	table.insert(nodeconnect, conn)
 	table.insert(nodenames, n)
 end, function (a, b)
-	table.insert(nodes[a], b)
-	table.insert(nodes[b], a)
+	table.insert(nodeconnect[a], b)
+	table.insert(nodeconnect[b], a)
 end)
 
 -- Start testing
-require("culib")
+
+local function generateMessage()
+	local na = math.random(#nodes)
+	local nb = math.random(#nodes)
+	nodes[na].output(nodenames[na], nodenames[nb], "T" .. tostring(math.random()))
+end
+
+local generateEvery = 1
+local generateCount = 10000
+while (generateCount > 0) or (#queuedCalls > 0) do
+	if (systime % generateEvery) == 0 then
+		if generateCount > 0 then
+			generateMessage()
+			generateCount = generateCount - 1
+		end
+	end
+	local qc = queuedCalls
+	queuedCalls = {}
+	for _, v in ipairs(nodes) do
+		v.refresh()
+	end
+	for _, v in ipairs(qc) do
+		v()
+	end
+	print("run iteration, " .. #qc .. " calls")
+	systime = systime + 1
+end
+
+print(statSD, statPT)