mirror of
https://github.com/hsoft/collapseos.git
synced 2024-11-30 22:48:08 +11:00
7dc00179f7
By default, it changes nothing, but it allows interesting setups, such as using AT28! for directly uploading to EEPROM. I've also updated the EEPROM recipe to upload directly to 0x2000. I'm not sure what has changed, but it's working fine now.
53 lines
1.8 KiB
Markdown
53 lines
1.8 KiB
Markdown
# Writing to a AT28 from Collapse OS
|
|
|
|
## Goal
|
|
|
|
Write in an AT28 EEPROM from within Collapse OS so that you can have it update
|
|
itself.
|
|
|
|
## Gathering parts
|
|
|
|
* A RC2014 Classic
|
|
* An extra AT28C64B
|
|
* 1x 40106 inverter gates
|
|
* Proto board, RC2014 header pins, wires, IC sockets, etc.
|
|
|
|
## Building the EEPROM holder
|
|
|
|
The AT28 is SRAM compatible so you could use a RAM module for it. However,
|
|
there is only one RAM module with the Classic version of the RC2014 and we
|
|
need it to run Collapse OS.
|
|
|
|
You could probably use the 64K RAM module for this purpose, but I don't have one
|
|
and I haven't tried it. For this recipe, I built my own module which is the same
|
|
as the regular ROM module but with `WR` wired and geared for address range
|
|
`0x2000-0x3fff`.
|
|
|
|
If you're tempted by the idea of hacking your existing RC2014 ROM module by
|
|
wiring `WR` and write directly to the range `0x0000-0x1fff` while running it,
|
|
be aware that it's not that easy. I was also tempted by this idea, tried it,
|
|
but on bootup, it seems that some random `WR` triggers happen and it corrupts
|
|
the EEPROM contents. Theoretically, we could go around that by putting the AT28
|
|
in write protection mode, but I preferred building my own module.
|
|
|
|
I don't think you need a schematic. It's really simple.
|
|
|
|
### Building the binary
|
|
|
|
The binary from the base recipe has almost all it needs to write to EEPROM. The
|
|
only thing it needs is the AT28 driver from B592. You could add it to the
|
|
`xcomp` unit and rebuild, but the driver is so tiny, you're probably better off
|
|
loading it at runtime.
|
|
|
|
If your system has mass storage, it's as easy as a LOAD. If it doesn't, you
|
|
can use `/tools/exec` to send `blk/593` to the RC2014.
|
|
|
|
## Writing contents to the AT28
|
|
|
|
The driver provides `AT28!` which can be plugged in adev's `A!*`. You can do so
|
|
with `' AT28! A!* !`.
|
|
|
|
Then, upload your binary to EEPROM with:
|
|
|
|
./upload <tty device> 2000 <filename>
|