34ee91a0d7
This will soon allow use to seek and tell on input, which is necessary for a second pass which is necessary for forward symbol references. This require making `blkSel` a bit more flexible. Rather than having one global selected blkdev, each app can select its own, in its own memory space. |
||
|---|---|---|
| .. | ||
| spirelay | ||
| Makefile | ||
| README.md | ||
| glue.asm | ||
| jumptable.inc | ||
| sdinit.asm | ||
README.md
Accessing a MicroSD card
Status: work in progress.
SD cards are great because they are accessible directly. No supporting IC is necessary. The easiest way to access them is through the SPI protocol.
Due to the way IO works in z80, implementing SPI through it as a bit awkward: You can't really keep pins high and low on an IO line. You need some kind of intermediary between z80 IOs and SPI.
There are many ways to achieve this. This recipe explains how to build your own
hacked off SPI relay for the RC2014. It can then be used with sdc.asm to
drive a SD card.
Goal
Read and write to a SD card from Collapse OS using a SPI relay of our own design.
Gathering parts
- A RC2014 with Collapse OS with these features:
- shell
- blockdev
- sdc
- A MicroSD breakout board. I use Adafruit's.
- A proto board + header pins with 39 positions so we can make a RC2014 card.
- Diodes, resistors and stuff
- 40106 (Inverter gates)
- 4011 (NAND gates)
- 74xx139 (Decoder)
- 74xx161 (Binary counter)
- 74xx165 (Parallel input shift register)
- 74xx595 (Shift register)
Building the SPI relay
The schematic supplied with this recipe works well with sdc.asm.
Of course, it's not the only possible design that works, but I think it's one
of the most straighforwards.
The basic idea with this relay is to have one shift register used as input,
loaded in parallel mode from the z80 bus and a shift register that takes the
serial input from MISO and has its output wired to the z80 bus.
These two shift registers are clocked by a binary counter that clocks exactly
8 times whenever a write operation on port 4 occurs. Those 8 clocks send
data we've just received in the 74xx165 into MOSI and get MISO into the
74xx595.
The 74xx139 then takes care of activating the right ICs on the right
combinations of IORQ/WR/RD/Axx.
The rest of the ICs is fluff around this all.
My first idea was to implement the relay with an AVR microcontroller to minimize the number of ICs, but it's too slow. We have to be able to respond within 300ns! Following that, it became necessary to add a 595 and a 165, but if we're going to add that, why not go the extra mile and get rid of the microcontroller?
To that end, I was heavily inspired by this design.
This board uses port 4 for SPI data, port 5 to pull CS low and port 6
to pull it high. Port 7 is unused but monopolized by the card.
Little advice: If you make your own design, double check propagation delays!
Some NAND gates, such as the 4093, are too slow to properly respond within
a 300ns limit. For example, in my own prototype, I use a 4093 because that's
what I have in inventory. For the CS flip-flop, the propagation delay doesn't
matter. However, it does matter for the SELECT line, so I don't follow my
own schematic with regards to the M1 and A2 lines and use two inverters
instead.
Building the kernel
To be able to work with your SPI relay and communicate with the card, you should have glue code that looks like this.
Initially, when you don't know if things work well yet, you should comment out the block creation part.
Testing CD card initialization
This receipes contains a little user program that initializes a SD card, reads the first 12 bytes from its first sector and prints it.
The first thing we'll do is fill the SD card's first 12 bytes with "Hello World!":
echo "Hello World!" > /dev/sdX
Then, you can run make from within this folder to compile sdinit.bin and
then upload and run that code from memory. You might need to
call the routine more than once (On my local tests, I need to call it twice).
If all goes well, you should see your "Hello World!" printed to the console!
Create a block device from the SD card reader
TODO